Shimano 600 FD Clamp

stt192 · 2015-12-03T19:19:58+00:00

I have a Shimano 600 front derailleur from a Shimano 600 gearset off an old road bike (Decathlon Cobra 740) and I wish to reassemble it on a Cube Peloton 2014 frame. So far the adapting to a 35.9 (cf 28.6 mm) seat tube for the front derailleur is the only difficulty. I see clamps advertised but without the limit screws. Does a direct replacement exist or do I have to get another compatible front derailleur and what would that be. Thank you in anticipation for your expert advice.

This topic has 0 replies, 1 voice, and was last updated 10 years, 7 months ago by stt192.

Creator

Topic
December 3, 2015 at 7:19 pm #25123

stt192

I have a Shimano 600 front derailleur from a Shimano 600 gearset off an old road bike (Decathlon Cobra 740) and I wish to reassemble it on a Cube Peloton 2014 frame. So far the adapting to a 35.9 (cf 28.6 mm) seat tube for the front derailleur is the only difficulty.

I see clamps advertised but without the limit screws. Does a direct replacement exist or do I have to get another compatible front derailleur and what would that be. Thank you in anticipation for your expert advice.
Creator

Topic

You must be logged in to reply to this topic.