[adam900710]

Hi,

I recently upgrade my pedal from Keo 2 Classic to Keo 2 Blade (12Nm).
At the beginning, Keo 2 Blade seems quite good, except it needs a little more force to unclip.

But after sometime, the extra unclip force makes my knee pain, and sometimes makes me unconfident when
I need to unclip in a hurry.

So I’d like to reduce the tension of Keo 2 Blade, but as 12Nm version is already the lowest tension,
it seems impossible to reduce it anymore.

But I found Keo 2 Max blade provides the 8Nm version, and they only have minor difference.

So, is it possible to get an 8Nm Keo 2 max blade tension blade to replace the 12Nm one on Keo 2 Blade?

Thanks.

Topic

[Toro Toro]

Ah. I use the older blade
Ah. I use the older blade design, which I think needs to be put in while flexed.

[adam900710]

Thanks a lot.
Ordered 8Nm
Thanks a lot.
Ordered 8Nm replacement kit.

But about the special tool, it seems that only T10 and T8 key is needed to replace it.

So IMHO there is no so-called “special” tool needed to replace it.

[Toro Toro]

It should be, but you’ll need
It should be, but you’ll need to get it done by a retailer for you; it’s not a job you can do yourself, I understand.

[Author]

Replies