- This topic has 5 replies, 3 voices, and was last updated 3 years, 6 months ago by
.
-
Topic
-
I’m trying to get to grips with the LTN 1/20 Guidelines, but it’s nearly 200 pages !
If an A-barrier is taken out, am I correct that the approved replacement is a 1.5m gap, or bollards with 1.5m gaps between them?
Thanks.
-
There’s a table in section 5
There’s a table in section 5.5 Cycle lane and track
widths that lists 1.5m as the absolute minimum width of a cycle lane or track.There’s also this in section 8.3 Access controls
An alternative method is to provide bollards
at a minimum of 1.5m spacing, which allows users to
approach in a straight line whilst permitting all types
of cycle and mobility scooter to gain access. If access
is required by wider maintenance vehicles, a lockable
bollard can be used
And another. This is an
And another. This is an entrance to the local park.
Here’s an example of one I’m
Here’s an example of one I’m working on:
- You must be logged in to reply to this topic.