log in
register

2 Pin freehub removal tool for freehub on mavic cx222 rim from specialised?

Viewing 3 replies - 1 through 3 (of 3 total)
  • Author
    Replies
  • July 6, 2022 at 4:42 pm #994527
    0
    HoarseMann

    No probs. You might need both

    No probs. You might need both! Some freehubs are removed from the opposite side as per this example: https://youtu.be/dfZ8BZLrfT4?t=406

    There’s a lot of variation and can be a right pain to work out which one you have. I needed a 14mm key for one of my wheels!

    July 6, 2022 at 4:12 pm #994525
    0
    propagandazoo

    Thanks for info and speedy
    Thanks for info and speedy reply.

    Looks like I just need an 11 or 12mm Allen key.

    Regards

    July 6, 2022 at 2:32 pm #994523
    0
    HoarseMann

    hmm, not sure about this

    hmm, not sure about this particular wheel, but usually the freehub body can be fully removed with a large allen key.

    That 2-slot lock ring is for disassembling the freehub body, which is inadviseable, as some have lots of tiny ball bearings inside and it’s a whole load easier just to buy a new freehub body. It also usually has a reverse thread like a left pedal (clockwise to slacken).

    good video on it here: https://youtu.be/W3O_1P8EMiE?t=34

    here’s the tool (check dimensions) https://www.amazon.co.uk/CYBTM-Disassembly-Installation-Flywheel-Cassette/dp/B08S386GVX/

  • Author
    Replies
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.