log in
register

Colnago Geometry

  • Creator
    Topic
  • January 10, 2022 at 7:49 pm #31924
    j_vora

    Hello : 

    I’ve tried to learn about Colnago’s Slope & High Geometries, but there is practically no info out there, including the Colnago website. The site mainly provides numbers on the geometry charts & not much more. This lack of explanation is rather surprising.

    I wrote to Colnago about 2 months ago regarding the same, unfortunately have yet to hear from them. 

    Can anyone share info about these terminologies. 

    Thanks

  • Creator
    Topic
Viewing 5 replies - 1 through 5 (of 5 total)
  • Author
    Replies
  • January 16, 2022 at 8:02 am #988393
    0
    kev-s

    Matthewn5 has pretty much

    Matthewn5 has pretty much nailed it

    The H models (longer headtube) were first released on the C60 and allows you to run your stem slammed  but still maintain the same stack height of a normal C60/64 that has around 20mm of spacers fitted

    January 11, 2022 at 9:09 am #988391
    0
    SimoninSpalding

    If you are in the UK their

    If you are in the UK their official distributor, Windwave, were really helpful to me when I was restoring an older Colnago.  https://www.windwave.co.uk/contact-us.aspx

    January 11, 2022 at 7:49 am #988389
    0
    Chris Hayes

    Sloping geometry….on a

    Sloping geometry….on a Colnago….I’ve just spat my tea over my laptop! 

    January 11, 2022 at 4:44 am #988387
    0
    j_vora

    Thank you matthewn5 for the

    Thank you matthewn5 for the explanation –

    Although I searched the site, the links you shared eleuded me – 

    The links along with your explanation really helps.

    Many thaks – 

    January 10, 2022 at 10:19 pm #988385
    0
    matthewn5

    Back in the day Colnago’s

    Back in the day Colnago’s bikes were only available with a traditional (horizontal) top tube. Then at some point they were offered in Sloping (modern) or traditional (horizontal) geometry. The sloping geometry was designated by an ‘S’ after the number. The number refers to the seat tube centre-top dimension, so a 52s (‘sloping’) has a 52cm seat tube but the same effective top tube (550mm) as a 56 (‘traditional’). Those number designations cause a lot of confusion to this day.

    Here for example is the geometry chart for the C59 with the ‘sloping’ geometry on the top chart and ‘traditional’ below:

    https://dbyvw4eroffpi.cloudfront.net/images/size-guides/inventory/57733.png

    The C60 was the last to include the traditional (horizontal top tube) option:

    http://www.wrenchscience.com/DBImages/Geometry/colnago-c60-geometry-2015.jpg

    The C64 finally dropped the traditional option, retaining only ‘sloping’ and ‘high’ geometries. The ‘high’ geometry also features a sloping top tube. Here’s the geometry chart for the C64 with ‘high’ and ‘sloping’ geometry shown:

    https://images.coloradocyclist.com/sizingcharts/colnago-c64-geometry.jpg

    The geometries are indicated in the sizing by 52s or 52h. Both 52h and 52s have the same seat tube length (52cm), but the stack is higher for the high version and the reach slightly less. This is achieved by putting more slope on the top tube, and fitting a longer head tube.

    They have an explanation on their website as to why they now only produce bikes with sloping top tubes:

    https://www.colnago.com/en/news-en/road-news-en/the-reason-for-sloping/

    I’m sure someone will be along soon to correct this, but that’s as I understand it.

    If you’re interested in the evolution of Colnago’s carbon bikes, this is packed with info (pdf):

    http://brown-snout.com/cycling/tech/_colnago-c40-family-tree.pdf

  • Author
    Replies
Viewing 5 replies - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.