log in
register

Practicalities for E-Bike puncture repair

  • This topic has 15 replies, 12 voices, and was last updated 6 years ago by ktache.
  • Creator
    Topic
  • May 16, 2020 at 3:37 pm #30728
    Achtervolger

    My mum’s recently purchased an e-bike. It’s great and she absolutely loves it. However, in common with many e-bikes it’s fairly heavy, which got me to thinking about the practicalities of how she’d replace an inner tube if she punctured whilst out cycling. She’s got the know-how to do it, but it’d be a struggle to turn the bike upside-down to remove either of the wheels. Nor do I think it would be practical to lift up either the front or the rear of the bike with one hand, whilst removing the wheel with the other. I thought that perhaps some sort of block / device to put under the BB shell to raise the front or back wheel might work, and so long as it wasn’t ridiculously heavy it wouldn’t be a problem for her to carry it in her panniers. Does anyone know of any such device? Or have any other ideas? (I may well be missing some really obvious technique!). The bike is a step-through style.

  • Creator
    Topic
Viewing 15 replies - 1 through 15 (of 15 total)
  • Author
    Replies
  • May 22, 2020 at 10:10 am #959109
    0
    ktache

    Perhaps she’s a stickler for

    Perhaps she’s a stickler for rule #49.

    May 22, 2020 at 8:53 am #959107
    0
    bikeman01

    I appreciate your mum might

    I appreciate your mum might not be very srong but why would she not be able to turn the bike over by laying it down and titling it back upsidedown onto the seat/handle bars by lifting the wheels. If she can’t right it from a horizontal position at all then she will have bigger problems than a puncture.

    May 22, 2020 at 6:59 am #959105
    0
    EK Spinner

    I have used the injected

    I have used the injected puncture repair stuff on a commuter bike and it was very effective, left it in for over a year with no problems. It was very noticable at the start of a ride though (especially if left for a few days) as the liquid goo had all run to the bottom and left the wheel out of balance, took about 1/2 mile at reasonable speed to feel right again

    May 22, 2020 at 3:41 am #959103
    0
    Philh68

    Better to minimise the chance

    Better to minimise the chance of having to fix it, rather than work out how. I’d recommend using Slime sealant, either the pretreated tubes or just buy the can and treat the existing tubes with it (I get it at my auto parts store here in Aus).

    The suggestions to use Schwalbe Marathons is good, but they’re tough to put on or off and as good as they are they won’t stop a 3 inch nail, which happened to me last week. Slime will make the tubes self healing and is guaranteed to work for two years. I put the Marathon Plus and Slime tubes on a Gazelle e-bike, because having a Nexus hub and roller brake plus a front hub motor made removing either wheel complicated, plus all the guards and rack made patching a tube in situ more trouble than it’s worth, so it was good insurance.

    May 22, 2020 at 1:02 am #959101
    0
    Achtervolger

    Thanks for highlighting this

    Thanks for highlighting this product – I think someone else mentioned it on this thread, for cars. It sounds like a pretty good idea, and could well be worth carrying for emergencies.

     

    May 22, 2020 at 12:28 am #959099
    0
    ktache

    I may be a bit too late,  but

    I may be a bit too late,  but it’s just popped into my head, there are several companies, BTwin and Weldite, there may be others, who have a “emergency tyre inflator” in a can, with sealent and ‘”air”, enough to pressure a tyre.  Don’t know if that would help.

    May 21, 2020 at 11:50 pm #959097
    0
    Achtervolger

    Thanks for all responses and

    Thanks for all responses and suggestions. It’s good to hear that the tyres on most electric bikes are pretty tough… and if the worst happens, mum can always call Dad for a pick-up!

    May 17, 2020 at 2:04 pm #959095
    0
    iandusud

    I fitted Schwalbe Marathons

    I fitted Schwalbe Marathons to my cargo bike, not because I wouldn’t able to replace a tube if necessary but because I’d rather not have the hassle or the need to carry a spare tube and a spanner. I do however carry an aerosol puncture repair with me just in case. I’ve never used one on a bike but I have used them both on motorbikes and cars as a get you home repair, always with success. 

    May 17, 2020 at 12:23 pm #959093
    0
    Hirsute
    Lukas wrote:
    You can buy double ended inner tubes (Rubena manufacture them) These can be inserted without taking the wheel off and are therefore recommended for cargo bikes especially.

    Never heard of those before !

    I wonder how they feel when riding and whether you can detect the join each revolution.

    May 17, 2020 at 9:16 am #959091
    0
    Tom_77

    An alternative would be a

    An alternative would be a bicycle recovery service (like the AA / RAC but for bikes). E.g. https://www.eta.co.uk/breakdown/bicycle/

    (no idea if they’re any good, was just the first result on Google)

    May 17, 2020 at 7:49 am #959089
    0
    Rome73

    This is a dilemma indeed. As

    This is a dilemma indeed. As mentioned by others – upgrade the tyres to Marathon Plus or Big Ben Plus or similar. Check the pressure reguarly. 

    What type of gears does the bike have? A hub gear, especially a CVT like NuVinci is a sod to remove (and re install) the wheel in the rain on the side of the road. If it’s a quality eBike it will have hydraulic disc brakes so that adds another ‘challenge’ when putting the wheel back on. 

    You can buy double ended inner tubes (Rubena manufacture them) These can be inserted without taking the wheel off and are therefore recommended for cargo bikes especially. 

    Or you could use that inner tube sealant stuff – but I have never used it so can’t say if it works. 

    The final piece of advice; if you are an urban cyclists know where your bike shops are – so you can push the bike to the nearest shop if you get a flat on the way to work etc if you get stuck. 

    May 17, 2020 at 4:54 am #959087
    0
    huntswheelers

    I’ve customers with e-bikes..
    I’ve customers with e-bikes…. those with cheaper models I’ve retro fitted marathon plus as most quality ones already spec those out of the box. I did the same recently to a Gazelle Cabby which only had Land Cruisers on the rear. I also have a few who have asked for slime tubes and Marathon plus tyres

    May 16, 2020 at 10:06 pm #959085
    0
    HoarseMann

    sounds like you need a good

    sounds like you need a good quality double kick stand

    https://ursus.it/shop/urban-city/big-foot-87/

    May 16, 2020 at 7:20 pm #959083
    0
    Hirsute

    Get puncture resistant tyres
    Get puncture resistant tyres or even tubeless.
    Get a lift or taxi if you get a puncture.

    Although if the bike is laid down on its side, it should be easy to remove the wheel.

    May 16, 2020 at 4:28 pm #959081
    0
    Anonymous

    Only my anecdotal evidence,

    Only my anecdotal evidence, but I’ve ridden both normal e-bikes and e-cargobikes for years and never had a single puncture even though I’ve covered far more miles on them than I do on my road bike, roughly 10-15k a year

    Why?

    The tyres fitted are of much higher quality, usually with puncture protection built in, Schwalbe Marathon seem to be favoured by many e-bike manufacturers. 

    Instead of worrying about carrying an item unlikely to be used bar the very odd occurence I’d ensure the tyres fitted are of a similar quality as mentioned above.

  • Author
    Replies
Viewing 15 replies - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.