Alu CX/adventure Bike Suggestions

  • Creator
    Topic
  • #29025
    Canyon48

    Hi All,

    Since I upgraded the wheels on my Canyon Ultimate and the groupset on my Whyte Wessex (and replaced my Wessex wheels with the ones off the Ultimate), I’m left over with a set of DT Swiss R32 wheels and a hydro groupset (plus a saddle and seatpost I have lying around anyway ).

    I had been looking to build up a CX bike from a frameset and making a 1x Shimano (wolftooth) groupset. For this, I’d been looking at the Trek Crockett which was reduced to £600 (from 750), however, it’s no longer available in 54cm and the 2019 version is the full £750.

    I’ve worked out the cost of building up a CX bike using all the parts I already have and the parts that I’d need, the cost comes to a bit over £1200 (obviously the £750 frameset makes up most of this). This isn’t very economical, seeing as I reckon I could get at least £500 for the wheels and groupset I have left over, which could go on a new bike. I’m keen to hang on to the wheels though!

    After all this, I’m left looking for a new CX bike which must conform to the following specs;

    • £1200 ish (what I’d have to spend on getting the frame and parts for a CX bike anyway)
    • Aluminium frameset
    • Hydraulic Discs
    • 1x
    • Preference to take up to 40mm tyres
    • Able to do CX, bikepacking (rack/mudguard mounts NOT essential) and the odd bit of road riding.

    The Canyon Inflite seems to be topping my list at the moment, any other suggestions?

Viewing 4 replies - 1 through 4 (of 4 total)
  • Author
    Replies
  • #928643
    0
    Stef Marazzi

    Kinesis AT is only £560 at

    Kinesis AT is only £560 at Merlin Cycles at the minute. If it was good enough for Mike Hall….

    #928641
    0
    Joe Totale

    On-One Pickenflick? 

    On-One Pickenflick? 

    Let’s you have a Titanium bike which forfils all your other criteria including price, £700 for the frameset, £1199 for a Rival 22 build or £1399 for a Rival 1 build. 

    #928639
    0
    Drinfinity

    My similar spec has really
    My similar spec has really low ratio gears. A SRAM Rival ‘long cage’ mech will take a 42, and with a 34 on the front I can winch up anything, even late in a race. Agree on through axles.

    I was thinking of getting another bike with that spec, but I realised I could put a big cassette on my Raleigh CX, and fit a rack to the mudguard mounts, with a seatclamp rack mount gadget.

    #928637
    0
    Canyon48

    Thru axles are a must too

    Thru axles are a must too

Viewing 4 replies - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.