preferred-google-button
log in
register

Bianchi Sempre Pro mudguards

  • Creator
    Topic
  • October 30, 2016 at 10:44 am #26446
    GustyCycling

    Hi, 

    I’m looking for mudguards to fit to a Bianchi Sempre Pro that has been fitted with 25mm tyres & Ultegra brakes. I’ve borrowed a friends Crud Roadracer Mk2s but they didn’t have the clearance. 

    I know it won’t be aesthetically pleasing, buts it’s going to be better than the wet patch my arse is currently leaving on the chairs in the pub post ride. An ass saver does a decent job, but doesn’t help those around me or the bike itself. 

    Thanks

  • Creator
    Topic
Viewing 3 replies - 1 through 3 (of 3 total)
  • Author
    Replies
  • November 6, 2016 at 11:10 am #881059
    0
    Spangly Shiny

    Have a look at this article

    Have a look at this article for ideas.  http://www.cyclingweekly.co.uk/news/product-news/7-of-the-best-clip-on-mudguards-1681

    Personally I use the Topeak R1 / R2 with a little extra pastic bit rivetted onto the end. 

    October 31, 2016 at 12:44 pm #881057
    0
    thesaladdays

    I’ve got the Crud Mk2s fitted

    I’ve got the Crud Mk2s fitted with 25mm tyres, and my first thought after getting them on was also that there wasn’t enough clearance, but being stubborn (and/or lazy) after having spent most of an evening getting them on, I didn’t feel like taking them off right away.

    It took a few days of bending and pulling the plastic around in various directions, using a bike stand and spinning the wheels, listening for sources of rubbing noise, and more frustrated bending and pulling on the commute (always embarassing/irritating to have a noisy bike around other riders) but finally achieved the satisfying hum of tyres on tarmac only.  It’s admittedly tight on clearance, but I think it can be done.  That said they are kind of a faff to fit, but I like the minimalist look.

    October 31, 2016 at 11:39 am #881055
    0
    Jack Osbourne snr

    Try 23mm tyres and Crud
    Try 23mm tyres and Crud guards or raceblades

  • Author
    Replies
Viewing 3 replies - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.