Shimano 6800 brake assembly?

millhouse · 2015-06-01T11:10:10+01:00

:? Hi all, I have stripped my Ultegra calipers down after riding through winter to clean and lube the pivot points. After some interruptions, I have forgotten the order of washers/bearings!!! Does anyone know where I can find a complete parts diagram? I have downloaded a workshop manual but it on shows set up, not a complete parts breakdown. I guess that Shimano never intended these to be fully stripped. There are 2 tiny bearings with washers either side, I'm having trouble finding which way these go in. Thanks for any help. Charlie.

This topic has 3 replies, 3 voices, and was last updated 11 years, 1 month ago by therevokid.

Creator

Topic
June 1, 2015 at 11:10 am #24129

millhouse

😕 Hi all,
I have stripped my Ultegra calipers down after riding through winter to clean and lube the pivot points. After some interruptions, I have forgotten the order of washers/bearings!!!
Does anyone know where I can find a complete parts diagram? I have downloaded a workshop manual but it on shows set up, not a complete parts breakdown. I guess that Shimano never intended these to be fully stripped.
There are 2 tiny bearings with washers either side, I’m having trouble finding which way these go in.
Thanks for any help.

Charlie.
Creator

Topic

Viewing 3 replies - 1 through 3 (of 3 total)

Sort:

Author

Replies
June 2, 2015 at 7:50 am #848391
0

therevokid

or fit mudguards to protect
or fit mudguards to protect your brakes/mechs/arse 😉

any hoo … try looking at the pdf for the 6700 brake. It may point you
in the right direction … http://si.shimano.com/#seriesList/38/51

June 1, 2015 at 8:51 pm #848389
0

millhouse

Thank you for posting that,
Thank you for posting that, Gordini.
I had seen that diagram but the dual pivots are not shown in bits.
Top tip: Don’t take these calipers apart!

June 1, 2015 at 1:46 pm #848387
0

NZ Gordini

Hi Charlie, have a look at
Hi Charlie, have a look at this, it may help a bit…. http://cycle.shimano-eu.com/publish/content/global_cycle/en/nl/index/components/road/ultegra_6800/product.-code-BR-6800.-type-.br_road.html
It’s not the full exploded diagram but it is all that’s about and anyway if you can’t get them back together – new kit is always GOOD.

Gordini
Author

Replies

Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.