log in
register

Play in 11 speed cassette on Mavic wheel.

  • Creator
    Topic
  • April 2, 2015 at 2:36 pm #23645
    Anthony.C

    Hi, I just built up a bike with Ultegra 6800 and Mavic Kysirium Elite wheels. Now, the internet says that Mavic wheels are a perfect fit for 11 speed without the usual spacers needed for 10 speed but I can wiggle the cassette a couple of mm. Any ideas as to why ? The wheels aren’t new but I never noticed this with 10 speed.

  • Creator
    Topic
Viewing 10 replies - 1 through 10 (of 10 total)
  • Author
    Replies
  • April 3, 2015 at 11:17 pm #839959
    0
    DanTe

    New wheels?
    The Freehub could
    New wheels?
    The Freehub could be buggered. Might need new bushing/bearings. Is the freehub marked with slits?
    I’m in midst of a bit of a nightmare with an Elite rear wheel. The play had gotten to the pit of the gears missing changes.
    It rues out I seem to have somehow managed to ovalise the axle.

    April 3, 2015 at 8:42 pm #839957
    0
    matthewn5

    According to some websites a
    According to some websites a few Mavic wheels in the early days were made with a freehub a few 10ths of a mm too long, and were originally supplied with a spacer. Maybe yours is one of those?

    April 3, 2015 at 11:13 am #839955
    0
    Anthony.C

    http://www.slanecycles.com/ma
    http://www.slanecycles.com/mavic-ed11-cassette-spacer-for-campagnolo-11-speed-single-p-23867.html

    I found this one for campagnolo, is there any reason I should not use it with shimano ?

    April 3, 2015 at 10:36 am #839953
    0
    kwi

    Local engineering firm could
    Local engineering firm could probably knock one up cheaper than buying a cycling specific one.

    April 3, 2015 at 10:14 am #839951
    0
    Anthony.C

    Well I tried a 1 mm spacer
    Well I tried a 1 mm spacer and could not get the lockring on. It probably needs a 0.5 mm spacer but they are hard to find. Anyone know where I could get one?

    April 2, 2015 at 3:46 pm #839949
    0
    Anthony.C

    That’s what I was thinking, I
    That’s what I was thinking, I will try the 1 mm spacer that comes with 10 speed cassettes.

    April 2, 2015 at 3:37 pm #839947
    0
    2 Wheeled Idiot

    tbh I would just add a 1-2 mm
    tbh I would just add a 1-2 mm spacer behind the cassette as long as all the cassette spacers (between the cogs) are included, its not rocket science, if you can get it to fit without rocking or binding, jobs a good-un.

    April 2, 2015 at 3:36 pm #839945
    0
    glynr36

    I know Campag needs the very
    I know Campag needs the very slim space on 11speed (Running Cosmics and Chorus 11) and a mate put the same spacer in on his DA11 on Cosmics from day one and has had no issues, I know mavic say it isn’t needed though,

    April 2, 2015 at 3:32 pm #839943
    0
    Anthony.C

    Yep, all good and tight. I
    Yep, all good and tight. I reckon it needs a small spacer behind the cassette.

    April 2, 2015 at 3:23 pm #839941
    0
    glynr36

    Stating the obvious a little,
    Stating the obvious a little, but tightened it up enough and got all the sprockets sat correctly? All spacers in?

  • Author
    Replies
Viewing 10 replies - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.