log in
register

Knee Pain

  • Creator
    Topic
  • March 8, 2015 at 4:42 pm #23440
    stephen1986

    I am recently taken up cycling after availing of the c2w scheme.

    Yesterday I did my longest ride of 82km, not much climbing, only 350m however I’ve noticed on my last two outings that my right knee suffers pain whilst I cycle. I did get a bike fit when I purchased the bike, could it be incorrect setup that is causing the pain? Is this a common sensation among new cyclists? Is there anything I can do to alleviate the stress on the knee?

    Thanks

  • Creator
    Topic
Viewing 6 replies - 1 through 6 (of 6 total)
  • Author
    Replies
  • March 8, 2015 at 7:27 pm #835571
    0
    matthewn5

    This works for
    This works for me:
    http://www.competitivecyclist.com/Store/catalog/fitCalculatorBike.jsp
    Worth a try!

    Also, make sure you use a lower gear and keep the cadence (rpm) high. Don’t try to lug a big gear up the hills, ‘spin don’t lug’ might help to remember.

    March 8, 2015 at 7:09 pm #835569
    0
    glynr36

    As much as a fit can solve a
    As much as a fit can solve a lot of problems they’re bloody expensive, and I think a lot of places offering them have a vested interest so they can flog you a few new contact points, and then the other risk of you’ve got a spot on fit yourself and you’ve just turned over £100+ to find that out.

    Self research and investing some time can get you a pretty bang on fit (there’s a really good bike fit app for iOS that DCrainmaker recommended).

    But that’s digressing a bit, with this. Is it a new pain? How long have you been riding for? It more than likely is cleat related, but maybe not position, just that they’ve worn (if you’ve had them a while).
    When mine start going passing a point of wear I get a pain in my left knee first then right, usually the day after a hard ride.

    March 8, 2015 at 7:08 pm #835567
    0
    crikey

    Even the most basic fitting
    Even the most basic fitting session should start with the cleats. If it doesn’t, walk away.

    March 8, 2015 at 6:46 pm #835565
    0
    therevokid

    a “good” fit session will
    a “good” fit session will address cleats as well as all the rest of the bike
    so suggesting a fit is possibly the best option !

    If your fit then presents further problems you should be sorted free of charge.

    in my case it was poorly performing muscle groups and imbalances that
    caused the knee pains. both of which were picked up by the fit technician, who
    was also a very highly experienced sports physio.

    March 8, 2015 at 5:00 pm #835563
    0
    sergius

    It’s massively common
    It’s massively common unfortunately – and is most frequently a poor fit for the bike.

    Rather than suggesting more “professional” bike fits (I’m not a huge fan), I’d suggest you read up on the topic and understand the bio-mechanics of cycling, before trying a series of micro-adjustments over shorter rides to see what works best for you.

    This is what I ended up doing last year when I had lots of anterior pain in one knee – which a bike fit just made worse.

    Some links to start you off:

    Footloose


    http://www.bikeforums.net/road-cycling/406728-inner-side-knee-pain.html
    http://www.knee-pain-explained.com/
    http://www.cptips.com/knee.htm

    For me, it was all about cleat position.

    March 8, 2015 at 4:46 pm #835561
    0
    kwi

    I had knee pain when I
    I had knee pain when I started back into cycling, discovered it was my cleat position and after a bit of adjusting the pain went away.

  • Author
    Replies
Viewing 6 replies - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.