preferred-google-button
log in
register

I want to build a single speed – but how?!

  • Creator
    Topic
  • July 12, 2014 at 8:53 pm #21887
    MeowPew

    Hi all,

    New to cycling, I’m looking to build a single speed for fitness/something to mess around on thats a bit different. Frame wise my friend gave me a Dengfu FM098 (http://dengfubikes.com/product/detail.php?id=119) following a failed attempt to get a project going. I already have a set of freehub wheels however I’m not really sure where to start with the crankset. I know the bike has a BB30 and thats about my knowledge. I’ve tried looking for guides but a number of sites seem to centre around a fixie build. Open to advice – was thinking about the sram s100 crankset but not sure if this will fit… Any ideas on simple guides to follow/advice or recommend products would be great. Ideally don’t want to spend more than £100 on a crank.

    Thanks

  • Creator
    Topic
Viewing 10 replies - 1 through 10 (of 10 total)
  • Author
    Replies
  • July 15, 2014 at 9:00 pm #803603
    0
    pedalpowerDC

    Just to avoid confusion,
    Just to avoid confusion, please note that, contrary to an earlier post, there is no such thing as a “Shimano GXP BB”. If you try to mix-and-match Shimano crank/BB parts with SRAM GXP parts, they will not work, and you’ll have wasted time and money.

    Both of the aforementioned options are 24mm spindle cranks, but the Shimano is a straight 24mm all the way across and the SRAM tapers. They are not interchangeable. If you choose to use an adaptor to fit a 24mm spindle crank to your BB30/PF30 frame, be sure to get the right one.

    July 15, 2014 at 6:52 am #803601
    0
    andyp

    Keep the frame and get a
    Keep the frame and get a White Industries ENO Eccentric hub 🙂

    July 15, 2014 at 4:20 am #803599
    0
    bikeyourbest

    Sell that frame and buy a
    Sell that frame and buy a tracker with the proceeds. Then you can just put a flip flop wheel on the back, brakes and you’re good to go.

    Looks like a pretty decent frame so shouldn’t be too difficult to sell. Besides, it has DengFu which everyone knows is 10x better than KungFu

    July 14, 2014 at 4:54 pm #803597
    0
    surly_by_name

    You will struggle to do this
    You will struggle to do this for £100. But assuming you want to proceed, you will need:

    A chain tensioner. Surly singleator (c.£30) best balance of cost and performance in my experience.

    A crankset. BB30 cranksets hard to find, suggest BB30-BSA converter (c.£25) and then cheap chainset (you can get an Apex chainset on ebay without rings for somewhere around £30) cheapest option.

    Chain ring (c.£45). Get one of the new(ish) narrow/wide rings – more expensive (and potentially a bit hard to find in 110/130bcd rather than the more usual 104/94bcd) but excellent for single speed. Really, I would not build another SS without one of these.

    A cog. Again, Surly ones good because they have a broad base. (c.£25) Groove Armada from Planet X is similar and a bit cheaper at £15 (http://www.planetx.co.uk/i/q/SKOOSSGA/on-one-groove-armada-single-speed-sprocket)

    Some spacers and a lock ring. http://www.planetx.co.uk/i/q/SKOOSSKK/on-one-singlespeed-converter-kit

    July 14, 2014 at 8:32 am #803595
    0
    bashthebox

    Right, as so many have said
    Right, as so many have said this isn’t the ideal SS frame – but assuming you want to make the Dengfu into the single speed, you will need a chain tensioner.
    A quick google tells me there’s not many BB30 track cranksets – SRAM omnium is the one, S300 is another…
    Your alternative, if you don’t want to buy a really expensive crankset, is to get a BB30 adaptor. Depending on which one you get, you’ll be able to use Shimano GXP BBs and cranks, or old school square tapered BBs, which you may find allow you to get a pretty cheap crankset.

    It’s a minefield, all this bottom bracket and crankset malarkey. So many standards and variations on standards.

    July 13, 2014 at 9:13 pm #803593
    0
    pauldmorgan

    Buy a Dolan FXE frame and
    Buy a Dolan FXE frame and fork: cheap as chips and very versatile: track or commuter as it has mounts for brakes,, ‘guards and a rack should you need them.

    July 13, 2014 at 8:57 am #803591
    0
    Jack Osbourne snr

    Turn that into a geared bike
    Turn that into a geared bike or punt it and get something with horizontal dropouts.

    It can be done, but a frameset like that is not singlespeed friendly, certainly not as a novice project.

    July 13, 2014 at 8:18 am #803589
    0
    oldstrath

    Might be better though to buy
    Might be better though to buy something off ebay with horizontal dropouts, or get something like a Pompino with track ends. Not as light, but if you’re into fitness use rather than racing why worry?

    July 13, 2014 at 8:12 am #803587
    0
    oldstrath

    Here’s
    Here’s onehttp://www.singlespeedoutlaw.com/main/articles/singlespeedhowto.shtml

    July 12, 2014 at 10:35 pm #803585
    0
    Redvee

    The biggest issue you’ll have
    The biggest issue you’ll have to overcome if using that frame is the chain tension and gearing. Ideally for a SS bike you need horizontal drop outs to slide the rear wheel backwards or forwards to get the chain tension spot on.
    You might be lucky and choose what is called the magic gear which is a ratio from chainring and sprocket that needs to tensioner . Another option is to use a chain tensioner on the mech hanger.

  • Author
    Replies
Viewing 10 replies - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.