preferred-google-button
log in
register

Touring Wheels

  • Creator
    Topic
  • May 16, 2014 at 10:09 am #21449
    7thGalaxy

    Hi

    I was wondering what people would recommend for some reasonably budget touring wheels – should I go with bottom of range CX wheels? I’m looking for 28 or 30mm tire width, not worried about weight, it’s not for racing. More important that they’re durable and weight bearing so 28 or 32 spokes on rear wheel.

    Any suggestions?

    Thanks

  • Creator
    Topic
Viewing 7 replies - 1 through 7 (of 7 total)
  • Author
    Replies
  • May 29, 2014 at 3:55 pm #793595
    0
    keef66

    Have a look on Spa Cycles
    Have a look on Spa Cycles website; they cater for the tourist / audax rider. I’m sure if you phone them and describe what you want them for they’ll advise accordingly. (I’m considering them for some repairable winter wheels with a hub dynamo)

    May 17, 2014 at 6:36 am #793593
    0
    rainman onwheels

    dt swiss rr585 rims are
    dt swiss rr585 rims are pretty mega. I have them on my tandem and they are still running true after a fair bit of agro. 585 grams each though so not light 🙂

    May 16, 2014 at 8:55 pm #793591
    0
    Airzound

    Handbuilt wheels, Shimano 105
    Handbuilt wheels, Shimano 105 hubs on Mavic A719 36 hole rims, DT Swiss or Sapim SS DB spokes. These should out live you. I have assumed it is 700c wheels you are after. If 26″ then try Rigidi Andra rims again 36 holes and good hub such as Shimano XT.

    HTH.

    May 16, 2014 at 1:42 pm #793589
    0
    7thGalaxy

    Region is Wiltshire if anyone
    Region is Wiltshire if anyone has recommendations?

    May 16, 2014 at 1:06 pm #793587
    0
    SamShaw

    Another vote for a local
    Another vote for a local wheelbuilder, if you’re looking for something proper then handbuilt is the way to go, you’ll get something specific to your needs and it’ll be able to be serviced/spokes/rims replaced as necessary.

    May 16, 2014 at 1:06 pm #793585
    0
    MKultra

    New old stock Shimano hubs
    New old stock Shimano hubs are the way forward.

    STXC/Deore/LX/XT anything mid to late 90’s dependent on how many sprockets you want, on a good rim with stainless spokes it will be cheapish and fairly bombproof, plus you can replace odd spokes your self if you need to.

    If you have road OLN then 105’s of the period are nigh on identical.

    May 16, 2014 at 12:58 pm #793583
    0
    Flying Scot

    You should find a local
    You should find a local wheelbuilder and ask for advice, they wont be any more expensive than factory built wheels and they will be ‘yours’ and usually have free true ups for the life of the rims.

    If you say which region you are in, I’m sure you will get some recommendation’s.

    I use ‘Big Al’ Wheelcraft myself, have done for 25 years, other people round my way (central Scotland) do the same or use Derek at Wheelsmith.

    Ambrosio rims are a favourite in this application, but your local guy will know best

  • Author
    Replies
Viewing 7 replies - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.