preferred-google-button
log in
register

Scott cr1 owners- headset Q?

  • Creator
    Topic
  • June 17, 2013 at 8:37 pm #19137
    Leigh2612

    Hi guys,
    I mainly ride MTB until the past couple of years. I wasn’t great at maintaining that… And am worse on my road bike (cr1 comp 2012). I am due a new headset .. Any ideas what will fit or what measurements I need?
    Cheers!!

    Leigh

  • Creator
    Topic
Viewing 9 replies - 1 through 9 (of 9 total)
  • Author
    Replies
  • June 27, 2013 at 9:02 am #743417
    0
    Leigh2612

    Happy to help!
    Happy to help!

    June 27, 2013 at 8:33 am #743415
    0
    maldin

    Leigh2612 wrote:I know it’s a
    [quote=Leigh2612]I know it’s a pain isn’t it…

    Here you go: http://www.chainreactioncycles.com/Mobile/MobileModels.aspx?ModelID=90541%5B/quote%5D

    Thank Leigh! Made my day 🙂 (and anyone else’s whose Googling brings them to this page 🙂 )

    June 27, 2013 at 6:15 am #743413
    0
    Leigh2612

    I know it’s a pain isn’t
    I know it’s a pain isn’t it…

    Here you go: http://www.chainreactioncycles.com/Mobile/MobileModels.aspx?ModelID=90541

    June 26, 2013 at 9:11 pm #743411
    0
    maldin

    Leigh2612 wrote:Hi

    Leigh2612 wrote:
    Hi guys,
    Fitted mine no issues. I got a ritchey sealed bearing unit but wish I had seen the cane creeks before… I had a 40 on my MTB which was super smooth.

    I don’t suppose you have a link to the Ritchey unit you bought? When I look on sites such as Wiggle, I see lots of different sizes even for semi-integrated pressfit 1 1/8 (OD 40mm, or OD 50mm, and some have additional sizing such as OD 50mm x 12.4) so its a minefield trying to determine the exact make model and size. If you have that to hand it would be helpful (I asked a local scott dealer and he couldn’t tell me the exact information either and is checking with Scott but so far no reply).

    June 25, 2013 at 6:02 pm #743409
    0
    Leigh2612

    Hi guys,
    Fitted mine no
    Hi guys,
    Fitted mine no issues. I got a ritchey sealed bearing unit but wish I had seen the cane creeks before… I had a 40 on my MTB which was super smooth.

    June 25, 2013 at 10:21 am #743407
    0
    maldin

    SPAM Naval wrote:i’ve a Scott
    [quote=SPAM Naval]i’ve a Scott Cr1 Pro (2010)and using the Cane Creek website I found the following headset which is consistent with your feedback from Scott. I’ve bought it from Wiggle but havn’t fitted it yet!

    Your link leads to two sizes – short and tall. Which did you choose and how did you make that decision?

    June 25, 2013 at 10:16 am #743405
    0
    maldin

    SPAM Naval wrote:i’ve a Scott
    [quote=SPAM Naval]i’ve a Scott Cr1 Pro (2010)and using the Cane Creek website I found the following headset which is consistent with your feedback from Scott. I’ve bought it from Wiggle but havn’t fitted it yet!

    http://www.wiggle.co.uk/cane-creek-40-series-zerostack-1-18-inch-headset/%5B/quote%5D

    Have you or Leigh fitted the headset successfully yet? That would be the final confidence inspiring test that you’ve got the correct part – then the rest of us can go a purchase the same 😉

    If you would be so kind as to post back here once you have done so, that would be great.

    June 20, 2013 at 12:34 pm #743403
    0
    SPAM Naval

    i’ve a Scott Cr1 Pro
    i’ve a Scott Cr1 Pro (2010)and using the Cane Creek website I found the following headset which is consistent with your feedback from Scott. I’ve bought it from Wiggle but havn’t fitted it yet!

    http://www.wiggle.co.uk/cane-creek-40-series-zerostack-1-18-inch-headset/

    June 18, 2013 at 2:37 pm #743401
    0
    Leigh2612

    The nice people at Scott sent
    The nice people at Scott sent me the answer-

    your Scott CR1 is 1 1/8 semi integrated with 44mm cups

    Cheers!

  • Author
    Replies
Viewing 9 replies - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.