Campag cassette with SRAM components

  • Creator
    Topic
  • #12125
    ArkRanger

    Hello Experts,

    initially coming from a mountain bike background and recently acquiring a road bike I still have a few questions that maybe one of you can help with.

    I recently purchased some Mavic Cosmic Carbones from eBay with a Campag freehub body, my plan was to change it for a Shimano M10 style (as the entire groupset is SRAM Rival), I then thought ‘hang on’ rather than buy a new freehub body and another cassette, I may be able to install a Campag 10spd cassette only and run this with the SRAM groupset, is this possible?
    Many thanks
    Pete 🙂

Viewing 5 replies - 1 through 5 (of 5 total)
  • Author
    Replies
  • #632951
    0
    purplecup

    Why do they do them one way
    Why do they do them one way round but not the other?

    #632949
    0
    Blackhound

    As purplecup says, and these
    As purplecup says, and these very nice people can supply you:

    http://www.surosa.co.uk/

    #632947
    0
    purplecup

    you can get ambrosio
    you can get ambrosio cassettes that have a shimano spline pattern and campy spacing. don’t know if anyone does one the other way round?

    #632945
    0
    ArkRanger

    Thanks for the quick reply
    Thanks for the quick reply Cat1 and for the link. Yes you are correct; from reading the link there is a sprocket pitch gap of 0.20mm between Campag, & SRAM/Shimano, that’s answered my question perfectly.

    Many thanks again!

    #632943
    0
    cat1commuter

    I don’t think it will work
    I don’t think it will work because the sprocket pitch is different between Campagnolo and Shimano/SRAM. This [url=http://www.ctc.org.uk/desktopdefault.aspx?tabid=3946]page on the CTC site[/url] has a lot of detail.

Viewing 5 replies - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.