Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Rotor launches £799 Power LT power meter

New single-sided power meter launched

Gone are the days of there being just one or two power meter options, the market is now being flooded with choice with new options all the time. Spanish company Rotor, better known for their non-round chainrings, launched the Power LT crank-based power meter this summer, which uses a non-driveside power meter to both reduce weight and the price. It costs £799.

That Rotor should offer a new single-sided power meter alongside their flagship power meter that measures both legs, is hardly a surprise. Stages have proven single-sided power measurement works with great popularity, and Garmin have also followed in the same footsteps with their new Vector S.

Rotor says the new LT (LT standing for Light) was developed at the request of the Lampre-Merida professional team who wanted a simpler and lighter power meter. The new Power LT has already been put to use by the Lampre-Merida team, getting its first outing at the Tour de France and in subsequent races.

It also allows Rotor to offer a more affordable version of their power meter, and at £799 it is one of the more affordable options now on the market. That price includes the whole crankset as well, though you do have to buy chainrings on top of that.

The new Power LT captures power data from strain gauges inside the left, non-driveside, crank arm. It essentially doubles this data using a mathematical equation to normalise the power, much like Stages and Garmin do. For most people such a power meter shouldn’t be a problem, but if you do have a serious leg imbalance and have decided that is something you want to work on with your pedalling technique, a single-sided power meter isn’t going to be much use. For most people the data received by a single-sided power meter should be adequate.

The Power LT transmits the data via ANT+ to any compatible device, so any of the current Garmin Edge GPS computers will work just fine. It adds a claimed 53g to their 3D+ chainset, using the same regular driveside arm, spider and spindle, just with a new non-driveside crank arm. Complete weight is claimed to be 535g for a 170mm chainset. It’s available in 110 and 130 BCD options and various arm lengths. The battery is easily replaceable when it runs out.

Rotor have priced the new Power LT at £799, which is about the same as Stages and Garmin, so the competition at this pricepoint is really starting to hot up. The important thing to remember is with the Rotor offering you're getting the whole crankset, though that doesn’t include the chainrings. The Power LT is compatible with most bottom bracket standards on the market.

More at www.rotoruk.co.uk/cranks/road-cranks/power-lt.php

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment

6 comments

Avatar
Dobbsy | 9 years ago
0 likes
David Arthur wrote:
G-bitch wrote:

Wonder if they'll just do a single crank retrofit option - there must be loads of folk out there with 3D+ cranksets already.

I'll be speaking to Rotor at the Cycle Show so I'll be sure to ask them about that, it's a fair point

I asked them on twitter about the single sided option. Seems like not now but maybe.

Avatar
giobox | 9 years ago
0 likes

Great to see more options at lower price points, but a tough sell when you look at the new single pedal Garmin Vector, which of course has the ability to be upgraded to a double sided solution later.

I wonder when the Stages price cut will happen. DCRainmaker hinted on a post I now can't find that the Stages guys could go cheaper, their current pricing really only happened because they were the first affordable option to hit the market, so they could comfortably charge a little more than they needed to.

Avatar
G-bitch | 9 years ago
0 likes

Wonder if they'll just do a single crank retrofit option - there must be loads of folk out there with 3D+ cranksets already.

Avatar
glynr36 replied to G-bitch | 9 years ago
0 likes
G-bitch wrote:

Wonder if they'll just do a single crank retrofit option - there must be loads of folk out there with 3D+ cranksets already.

I read something in a review/article on them someplace online a while back (might be DCRainMaker) where they'd had comment from Rotor you wouldn't be able to get the power meter arm on it's own.

Avatar
David Arthur @d... replied to G-bitch | 9 years ago
0 likes
G-bitch wrote:

Wonder if they'll just do a single crank retrofit option - there must be loads of folk out there with 3D+ cranksets already.

I'll be speaking to Rotor at the Cycle Show so I'll be sure to ask them about that, it's a fair point

Avatar
IngloriousLou | 9 years ago
0 likes

All these new, cheaper, power meters can only be a good thing.

For too long the prices have been kept high by a shortage of competition.

The Vector S look like a great idea as very easy to move from bike to bike.

Latest Comments