Support road.cc

Like this site? Help us to make it better.

review

3T Discus Plus C25 Pro wheelset

7
£850.00

VERDICT:

7
10
Solid and dependable Italian 650b wheels with wide tyre support, but a bit spendy
Weight: 
1,685g
Contact: 

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

With its bold Exploro aero gravel bike, Italian company 3T has been a big proponent of large volume tyres on 650B wheels for road and gravel. These Discus Plus C25 Pro tubeless-compatible wheels are 3T's cheapest aluminium wheels in this wheel size. Performance is very good, with impressive reliability and easy setup and, but the price is high compared to some of the competition.

Pros: Reliable, durable, easy tubeless, wide compatibility
Cons: Expensive compared to competition

3t_discus_pro_650b_wheels-2.jpg

For decades, two wheel sizes dominated: 700C for road bikes, and 26 inch for mountain bikes. In the last few years 650B, an almost-disused French standard, has enjoyed a resurgence. In the mountain bike world it has replaced the 26-inch wheels used since the good old Repack days, and more recently has made a dent on the decreasingly conservative road cycling market.

The important dimension here is the size of the rim, measured at the point where the tyre bead sits. For a 700C wheel the bead seat is 622mm across; for a 650B its 584mm. The rim being smaller means you can use a fatter tyre and end up with the same rolling diameter. The bigger volume provides extra cushioning to iron out rough roads while the similar rolling diameter means the bike's geometry can be the same as if it had 700C wheels and smaller tyres. A bit of smart design means some frames can use either 650B wheels with fat gyres or 700C with skinnier rubber.

3t_discus_pro_650b_wheels-3.jpg

We're increasingly seeing 650B being offered by bike manufacturers under the loose tag of 'road plus', suggesting they're good for road riding plus a bit of dirt and light gravel on the side. Of course, if your bike has the necessary clearance, there's no stopping you fitting a narrow mountain bike tyre for really rough off-road riding, and there's plenty of that taking place.

All that said, the 3T Discus Plus C25 Pro wheelset is a really good choice if you do want to go down the 650B route for mainly road riding or a bit of gravel-bashing too. The aluminium rims are 30mm externally with a 24mm internal width which plays well with wide tyres and ensures compatibility with up to 2.1in tyres. I tested them primarily with WTB Horizon 47mm tyres and the wide rims provide good support of a tyre of this size, with minimal squirm or roll even at lower pressures.

3t_discus_pro_650b_wheels-5.jpg

The rims are tubeless-compatible. I always get a frisson of apprehension when I install a tubeless-compatible tyre and starting stoking the track pump, but happily, the tyres inflated at the first time and pressure retention has been excellent. With a good glug of sealant in each tyre, they have sailed through all manner of conditions and road and trail surfaces with no (touch wood) punctures to report.

The hubs use Shimano's Center Lock disc rotor mounting system, and boy does it save a lot of time fixing the rotors in place compared with fiddling about tightening six bolts. The wheels come with adapters for six-bolt rotors as well. The hubs are also compatible with both thru-axle and traditional quick release axles, and 3T neatly provides a range of adapters. The end caps come off with no tools required making setup a doddle.

3t_discus_pro_650b_wheels-9.jpg

The freehub is Shimano and SRAM 10/11-speed compatible, but you can swap to a SRAM XD or Campagnolo freehub as an aftermarket option if you wanted to go down that route. There is an increasing range of Shimano compatible wide-range cassettes now available that probably covers most requirements.

Lacing the hubs to rims are 24 double-butted, straight-pull stainless steel spokes in each wheel. Asymmetric rim drilling is claimed by 3T to reduce the difference in spoke tension between the driveside and non-driveside. To try and ensure as straight a spoke as possible, the spoke holes have 'double angle drilling' which is designed to better align the spoke with the hub flange, while the alloy nipples sit in a washer for better alignment.

3t_discus_pro_650b_wheels-8.jpg

I can determine no change in spoke tension between the wheels arriving and inspection after several months of riding. Despite taking quite a battering on my rough potholed roads and a few excursions into the woods, the wheels are still running true with no hint of a warp or buckle.

When it came to riding the wheels, with the 47mm Horizon tyres inflated to about 40-45psi for my 65kg weight the bike rolls along my bumpy Cotswolds roads with all the comfort of a well-worn sofa. I strongly recommend experimenting a lot with tyre pressure, don't simply set and forget. The tyres are able to soak up a lot of the small chatter, knocking out vibrations before they get to the handlebars and saddle, as well as coping with bugger impacts, say if you accidentally ride into a pothole or sunken manhole cover.

3t_discus_pro_650b_wheels-4.jpg

A nice trait of the bigger tyres and smaller wheels is that the handling of the bike is very similar to a regular 700C-wheeled bike, but the stability feels enhanced. It takes more energy to knock the bike off its line and it's not easily unsettled on very fast descents with coarse road surfaces. And the comfort is grand too: it's like double wrapping the bars and wearing a second pair of padded shorts.

The rolling efficiency of the big tyres is impressive too, but there's a noticeable increase in power requirement above about 35kph. Curb your enthusiasm and settle down to between 25-30kph and they feel no slower than a 28mm tyre on a 700c rim, but with all the wonderful extra comfort.

You're probably thinking you should rush out and buy these wheels. Well, as much as I can recommend them, and even though they are 3T's entry-level offering, the £850 price tag definitely feels a bit steep. There's a more expensive carbon version if you're feeling flush, though the weight saving might isn't all that impressive. You get a deeper rim, 28mm versus 21mm, so they should be more aero if that's important to you.

3t_discus_pro_650b_wheels-6.jpg

The road.cc review team hasn't yet reviewed many 650B wheelsets, so it's hard to offer many useful comparisons. There are the Reynolds ATR2s (£1,299) that Dave tested earlier this year, but you have to pay a substantial wedge of cash extra for a small return on performance. As Dave points out, any impact resistance and vibration damping benefits of carbon rims are made a bit irrelevant by the simple fact you're running a large volume tyre at low pressure. Still, they do serve to make the 3T wheels look better value.

But then your cast your eye over the Hunt range and — well. Hunt has recently launched the AdventureCarbon Disc wheels, weighing a claimed 1,425g and with an internal rim width of 24mm, for £879. That does make the 3T wheels look expensive.

There are cheaper options too, like Hunt's 650B AdventureSport Disc wheelset at £319. Now, we haven't reviewed these wheels (yet) but on paper, the 1,549g weight looks competitive. The 20mm internal rim width isn't quite as generous as the 3T wheels, though, and wider really does work better with fat tyres.

To conclude then, the 3T Discus Pro wheels have been ultra reliable and durable, with easy hub and disc rotor setup, and tubeless compatibility so easy even the most retro grouch cyclist could ditch the inner tubes and embrace the future. If you want to get on the 650B bandwagon and have the clearance in your bike to accommodate them, there's a lot to like here, except that high price tag.

Verdict

Solid and dependable Italian 650b wheels with wide tyre support, but a bit spendy

If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website

road.cc test report

Make and model: 3T Discus Plus C25 Pro wheelset

Size tested: 650b

Tell us what the wheel is for

Discus Plus C25 Pro is the entry-level wheelset of the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 30 mm wide, tubeless-ready alloy rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes.

Rim well is a full 24 mm wide, perfectly supporting both MTB and 650b tires' fit really wide file-tread road tires such as the 47mm WTB Horizon, or full-on 2.2-inch offroad tires. A 27.5-in wheel with fat tire fitted gives little away in weight to a standard 700c fitment; it also permits frame geometries close to road designs, preserving the quick handling and acceleration of a race bike. Discus Plus build is similar to Discus, utilizing the 3T linear+ system. Asymmetric rim drilling reduces difference in spoke tension between drive side and non-drive side.

Hubs have light-alloy oversize spindle with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135mm or 142mm. Light-alloy rim is 21mm deep and fits tubeless or tubed tires. This new wheelset is a true all-rounder, quick, versatile, and reliable, and remarkably light at 1650g.

Tell us some more about the technical aspects of the wheel?

Rim size: ETRTO 584 x 24c, (27,5"/650B), 30mm wide, 21 mm deep

Rim spec: Clincher, tubeless ready, alu 6000 series, welded joint, offset double

angle drilling, black satin anodized

Spokes: Round section, straight pull, stainless steel, black finish, double

butted, Pillar, 24F/24R

Nipples: Light alloy, spherical washer

Hubs: Centerlock type' oversize light alloy hub bodies and spindles - light

alloy freehub body' adjustable bearings' black satin anodized

Front hub spec: QR100/TA100x12/TA100x15 modular end-caps

Rear hub spec: QR135/TA135x12/TA142x12 modular end-caps

Rear hub compatibility: 10/11S Shimano/SRAM type freehub body*

Quick release: Alloy lever and nut, steel rod

Rate the wheel for quality of construction:
 
8/10

Solidly made wheels that stand up to plenty of abuse

Rate the wheel for performance:
 
8/10

Flawless performance

Rate the wheel for durability:
 
8/10

No issues at all during testing

Rate the wheel for weight
 
6/10

They compare well to other aluminium wheels and even some carbon wheels, though you can certainly get lighter

Rate the wheel for value:
 
6/10

£850 is certainly a lot of cash to spend on some wheels but you can defintiely shop around and find similar spec wheels for a lot less

Did the wheels stay true? Any issues with spoke tension?

No buckles or loose spokes to report

How easy did you find it to fit tyres?

Very easy to fit tubeless tyres

How did the wheel extras (eg skewers and rim tape) perform?

All the extras you need and easy to swap and install

Tell us how the wheel performed overall when used for its designed purpose

Provided very impressive performance with good reliability

Tell us what you particularly liked about the wheel

Wide rims work well with wide tyres, reaonabl weight, good reliability and look good too

Tell us what you particularly disliked about the wheel

Bit pricey compared to some rivals

Did you enjoy using the wheel? Yes

Would you consider buying the wheel? Maybe

Would you recommend the wheel to a friend? Maybe

Use this box to explain your overall score

These wheels meet all the requirements but the price is high compared to some rivals, which knocks down their value score a bit

Overall rating: 7/10

About the tester

Age: 31  Height: 180cm  Weight: 67kg

I usually ride:   My best bike is:

I've been riding for: 10-20 years  I ride: Every day  I would class myself as: Expert

I regularly do the following types of riding: road racing, time trialling, cyclo cross, commuting, touring, mtb,

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Latest Comments