Support road.cc

Like this site? Help us to make it better.

review

Topeak Prepstand Elite

6
£229.99

VERDICT:

6
10
Expensive for what you get; there are more stable options that are easier to use
Weight: 
6,200g

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

The Topeak Prepstand Elite is an okay example of a tube-clamping portable workstand, but while it's adequate for lighter jobs it's not stiff and stable enough for bigger ones. The robust tubes should stand up to a lot of abuse, though.

  • Pros: Durable, portable
  • Cons: Some flex in the system, unpadded clamp

Workstands are possibly my favourite cycling accessory. Working on bikes, for me and many others, is a way of relaxing, often tinkering away with a beer nearby. For me, a good workstand must be stable, allow access to the whole bike, and be robust enough to withstand regular bike washing.

> Find your nearest dealer here

> Buy this online here

Putting the Prepstand Elite up for the first time is simple. The quick release clamps are easy to set securely and the feet slide down to form the base. The arm that supports the clamp was a little trickier to figure out, and slow to adjust with a lot of twisting involved, but this, too, is secure once set.

Topeak Prepstand Elite - clamp head.jpg

My stand came with the clamp angled to hold the top tube. If this makes you squirm, you can rotate it to any position with the head turning 360 degrees. I set mine to clamp the seatpost.

Topeak Prepstand Elite - clamp head angle adjuster.jpg

My caution around clamping the top tube did mean that the small parts box is completely wasted as, in this position, anything in it will just fall out.

Topeak Prepstand Elite - storage.jpg

The clamp that holds your bike is unpadded, so I was careful not to rotate the bike accidentally while it was secured in place. The clamp is tightened via a plastic handle which isn't the smoothest to operate. The flex in the system also adds to this, resulting in the clamp moving around a lot. When holding a heavier bike up to the stand, the problem is highlighted.

Topeak Prepstand Elite - clamp handle unfolded.jpg

I've been working on my winter and cyclo-cross bikes which did present an advantage here over my preferred fork mounting workstand. The ability to have both the front and rear wheels in the bike meant I could fine tune my cantilevers on the cross bike and also my mudguards' position on the winter steed.

However, working on a bike with disc brakes, I'd be happier working with one wheel in at a time on a fork-mounting system. The benefits of being able to rotate the stand are key here; walking around to the other side of the bike is annoying for this lazy mechanic.

Stability is okay for lighter jobs, but there is flex in the system. It's fine for washing and basic adjustments, but I found that pedal removal needed to be done on the floor, and bar wrapping was a bit trickier than I'd like.

Topeak Prepstand Elite - leg.jpg

Once you're done tinkering, the Prepstand folds away relatively compactly, not taking up too much room in the shed. There's also a carry bag for transporting, although I didn't find I needed it when taking it in the car.

Topeak Prepstand Elite - folded.jpg

Most of the time, I remember to wipe down a stand after cleaning, but I'm not perfect. Especially after a cold cyclo-cross race. I'm more interested in that second beer and some food than drying the stand. This has seen its fair share of water and it's showing no signs of wear.

The fork mounting system as found in the Park Tool Team Race stand and the Feedback Sports Sprint stand are much more stable designs and allow rotation. They're a bit more expensive at £300-plus, but if you're spending this much money, I'd suggest seriously thinking about your requirements. For me, the ability to rotate a workstand and improved stability are essential.

> Buyer's Guide: 8 of the best workstands

Looking at the same seatpost clamping designs, there are several good options. The road.cc office, for example, has a Feedback Sports Sport-Mechanic stand. The clamping is much easier to operate and it's cheaper at £195 RRP.

The Prepstand Elite is okay, but I don't think it justifies the £229.99 price.

Verdict

Expensive for what you get; there are more stable options that are easier to use

If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website

road.cc test report

Make and model: Topeak Prepstand Elite

Size tested: n/a

Tell us what the product is for

Topeak says: "A pro level workstand with a built-in closable small parts bin. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening / releasing the clamp with ease."

I struggle to see a professional mechanic being happy with this. Mostly because I am one and I'm not happy. The clamp isn't easy to use and there are more stable systems that fold up just as small while being more stable.

Tell us some more about the technical aspects of the product?

From Topeak:

ADDED FEATURES - Carry bag, Rubber base feet, Clamp lever, Closable small parts bin

CLAMP HEAD - Non-marring rubber jaws, 360° rotation

CLAMP OPENING - 1.9 cm to 4.5 cm (0.75' - 1.8')

CLAMP HEIGHT - 107 cm to 178 cm (42' - 70')

MAX WEIGHT CAPACITY - 25 kg / 55 lb

WEIGHT - 6 kg / 13.23 lb

Rate the product for quality of construction:
 
5/10

The rotating handle for operating the clamp is too small and stiff.

Rate the product for performance:
 
6/10

It copes well with small jobs but it's too flexible for bigger jobs.

Rate the product for durability:
 
10/10

Washed many times and left out in the rain and cold. It's still fine.

Rate the product for weight (if applicable)
 
6/10

The low weight is a positive when transporting. But how much do you do that? I'd happily have it weight a lot more to make it stiffer.

Rate the product for value:
 
6/10

You do get a smooth operation when extending the tubes and the quick releases are easy to use. But the overall package needs to be much stronger for the money.

Tell us how the product performed overall when used for its designed purpose

It was good for light work when the bike was in the stand. There was too much movement to make bar wrapping and pedal removal easy.

Tell us what you particularly liked about the product

It's certainly durable.

Tell us what you particularly disliked about the product

The lack of stability and flex in the system made it difficult to get the bike into the stand.

Did you enjoy using the product? For most things, yes.

Would you consider buying the product? No, I like my bikes clamped by the dropouts.

Would you recommend the product to a friend? No

Use this box to explain your overall score

I like this, but there are better systems out there for less money.

Overall rating: 6/10

About the tester

Age: 22  Height: 177cm  Weight: 64kg

I usually ride: Cannondale Supersix Di2  My best bike is:

I've been riding for: 5-10 years  I ride: Every day  I would class myself as: Expert

I regularly do the following types of riding: road racing, time trialling, cyclo-cross, commuting, club rides, general fitness riding, I specialise in the Cafe Ride!

Add new comment

7 comments

Avatar
Markopic | 6 years ago
0 likes

I have the same seatpost (from Canyon bike) and I normally clamp it on my bike stand.

I usually put some old bike tube on the sides of the clamp on my stand, so I do not need to use much force to firmly hold the bike.

I also think that this seat post is intended to flex, so not much harm can be done to it. If it fails, it is still much cheaper than the frame.

Avatar
Markopic | 6 years ago
0 likes

Never, ever clamp bike frame - that is the most expensive part of the bike.

Also, the place in the middle of the top tube is usually the thinnest, so totaly wrong place to hold the bike.

Avatar
ClubSmed replied to Markopic | 6 years ago
1 like
Markopic wrote:

Never, ever clamp bike frame - that is the most expensive part of the bike.

Also, the place in the middle of the top tube is usually the thinnest, so totaly wrong place to hold the bike.

Surely if my frame is aluminium and my seatpost is  carbon fibre (2 piece VCLS 2.0) I am better off clamping the frame rather than the seatpost?

Avatar
Rapha Nadal replied to ClubSmed | 6 years ago
0 likes

ClubSmed wrote:

Markopic wrote:

Never, ever clamp bike frame - that is the most expensive part of the bike.

Also, the place in the middle of the top tube is usually the thinnest, so totaly wrong place to hold the bike.

Surely if my frame is aluminium and my seatpost is  carbon fibre (2 piece VCLS 2.0) I am better off clamping the frame rather than the seatpost?

Depends on the frame.  I've seen a CADD10 toptube get damaged by a conker in the past.  Imagine what would happen with clamping forces!

Avatar
Liam Cahill replied to ClubSmed | 6 years ago
0 likes

ClubSmed wrote:

Markopic wrote:

Never, ever clamp bike frame - that is the most expensive part of the bike.

Also, the place in the middle of the top tube is usually the thinnest, so totaly wrong place to hold the bike.

Surely if my frame is aluminium and my seatpost is  carbon fibre (2 piece VCLS 2.0) I am better off clamping the frame rather than the seatpost?

Seatposts by their design are meant to be clamped so there should never be an issue. Toptubes, I'd never do it but others will say it's fine. I don't want to find out that it's not.

Get around all that by getting a fork mounted stand. Simples.

Avatar
ClubSmed replied to Liam Cahill | 6 years ago
0 likes
Liam Cahill wrote:
ClubSmed wrote:
Markopic wrote:

Never, ever clamp bike frame - that is the most expensive part of the bike.

Also, the place in the middle of the top tube is usually the thinnest, so totaly wrong place to hold the bike.

Surely if my frame is aluminium and my seatpost is  carbon fibre (2 piece VCLS 2.0) I am better off clamping the frame rather than the seatpost?

Seatposts by their design are meant to be clamped so there should never be an issue. Toptubes, I'd never do it but others will say it's fine. I don't want to find out that it's not.

Get around all that by getting a fork mounted stand. Simples.

Are you sure that the VCLS 2.0 (http://road.cc/content/news/79843-just-canyon-vcls-post-20) was designed to be clamped? The exposed bit on my bike is the bit above the line marked on the post in this picture and I am not sure that clamping the split area is a good idea as you suggest.

 

Avatar
Liam Cahill replied to ClubSmed | 6 years ago
0 likes

 

[/quote]

Are you sure that the VCLS 2.0 (http://road.cc/content/news/79843-just-canyon-vcls-post-20) was designed to be clamped? The exposed bit on my bike is the bit above the line marked on the post in this picture and I am not sure that clamping the split area is a good idea as you suggest.

 

[/quote]

No idea if that's ok to be clamped. I'd simply shoot Canyon an email.

Latest Comments