Support road.cc

Like this site? Help us to make it better.

Any Scott Speedster owners on here?

Hi all. I've got a 2014 Scott Speedster 20 and ever since i've owned it i have had an issue with the front tyre rubbing against the inside of the forks due to wheel flex. The standard tyres are 25c and the tyre/fork clearance is tight. 6 months into ownership partially due to this and also because of a freehub failure, Scott replaced the standard Syncros wheels with Shimano R501's under warranty but not the forks. The tyre rubbing has continued and now i feel that the level of wear on the forks has potential for failure which is worrying. 

I have attempted to get Scott to replace the forks and also provide a solution to stop this happening again in the future but they are not interested. They have suggested i have the front wheel spokes tightened sad

So, are there any other Speedster owners on the forum that have experienced this issue? Do you have any recommendations on how i can get Scott to resolve this as their customer service is aweful?

In my mind this is a design flaw and also now bordering a safety issue for me so i think it's their responsibility to fix it. What are your thoughts?

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

6 comments

Avatar
HowardK | 6 years ago
0 likes

Wow, I wish I'd read this post a couple of weeks ago... I noticed the burn mark on the inside of my front fork and thought it must have been from when my wheel wasn't seated properly.  But now I realise that I've experienced the same issue, in that the front wheel must have been deflecting when I was cornering.  It all makes sense as I'm one of those "unable to ride with any rubs or mechanical noises" kind of guys, so this helped me realise it was a design fault rather than anything else.  

A couple of weeks ago I replaced my front fork with a Scott original but I've been running 23s so it seems that the issue can happen with them too.  The clearance is crazy tight around the wheels and I've been rapidly falling out of love with this Scott Speedster 20 as my winter bike.

So I'm going to replace it with a completely different brand.  Back to Trek or Cannondale I think.  Terrible that Scott wouldn't admit fault and do a product recall.  I don't like to imagine a face-plant due to a snapped fork!..  I've upgraded my wheels which should hopefully minimise the issue (the original Syncros were a disaster for me - bearings failing and decals peeling off from the off).

So thanks for posting and I hope you are rid of your Scott by now!

Avatar
DoctorCrankenstein | 8 years ago
0 likes

I had a similar problem on my Sunday steed, only on the rear where the wheel meets the bb area, nowadays on carbon frames they like to keep things as tight as possible with minimal clearance. I've just been extra careful setting my bike up, so its just taken a little paint away. I'd be reluctant to ride those forks in the picture much longer, I'd take it back to where I bought it and explain the problem in depth. Their bike mechanic will be more empathetic than Scotts customer service.

Avatar
Roadie_john | 8 years ago
0 likes

I'm running an XL Speedster 30 frame that I got second hand and built up with Tiagra 4700. I'm running 23mm tyres on R500s and haven't had any problems. A few friends have complained that they've tried the R500/501 and found them a bit flexible, but mine are still pretty good and true. The fork is very tight if you fit mudgurads though (which is why I'm running 23mm tyres...)

 

Avatar
chrisl | 8 years ago
0 likes

Thought I'd check mine as it's next to me on the turbo... No problems here, and it's the tiny ladies one (speedster 15 with 25c's on, some time with stock wheels and some time with upgrades) but I think mine was 2013. Sounds like a bit of bad luck from a slightly different design?

Avatar
rjfrussell | 8 years ago
0 likes

It just doesn't quite cope with the 25c tyres.  Had a similar issue with my wife's bike when we put 25c on, and had to revert to 23  (which were the stock tyres it came with).

And then we bought a different bike.

Avatar
speedster20 | 8 years ago
0 likes

Here is a picture of the wear which has progressed since this was taken.

//i256.photobucket.com/albums/hh171/syncroVR6/IMG_20150425_111940159_HDR_zps0tbch2il.jpg)

Latest Comments