Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Verve Cycling to launch InfoCrank power meter

Australian crank-based power meter will be available within weeks

Australian brand Verve Cycling says that it’s just a few weeks away from delivering its first crank-based power meters.

The power meter market is getting ever busier, the Verve InfoCrank coming in at about the mid-point of the market in terms of price with systems starting at US$1,750 (which is about £1,040 at today’s exchange rate).

InfoCrank measures each leg independently, unlike the Stages crank-based system, for example, that measures just your left leg and doubles it, assuming that your legs are producing equal amounts of power.

It gives you your cadence (pedal revolutions per minute) using a magnetic sensor because, Verve says, a magnetic sensor is more accurate and requires less power than other methods of taking your cadence, and it has faster start-up and response times.

The system also measures your torque (in Nm), multiplying that by your cadence to give your power (watts).

So how do Verve measure torque?

“InfoCrank is engineered from the outset to house the high-precision KIP power measuring system,” says Verve Cycling. “CNC-controlled pockets placed in the load path control local strains. Measuring devices transmit accurate, repeatable power figures.”

For more on the KIP power meter system, visit www.kipcycling.com.

Verve reckon that you can use InfoCrank “anywhere you can ride your road bike”, and they claim that it’s “almost unbreakable”. They say that they’ve been commissioned by the Australian Institute of Sport to design versions for track, MTB and BMX.

It’s said to be waterproof (IPX7, which means it can survive being submerged in a metre of water for 30mins) and to compensate for variations in temperature automatically.

How accurate is the system? Verve is at pains to point out that, “With relative measurements, readings should have reference to context, as in ±2% of the system’s maximum reading capability. Accuracy also depends on how cadence is measured, and on the A-D [analog-to-digital] converter’s sampling rate.”

That said, they claim, “InfoCrank shows you that most of the time you ride the bike with loads that can be measured accurately at ±1%, while other times, because the load is less, it may be rather less accurate, ±1.5–1.75%.”

Verve also claim that, “Under track testing, InfoCrank produced cleaner cadence and torque data than the SRM. The InfoCrank seems to respond faster to torque changes. The high-speed data generated from the InfoCranks appears to be of high quality with a good signal to noise ratio.”

Of course, SRM might have a different tale to tell; we’re just reporting Verve’s claims. We’ve not used the InfoCrank system.

InfoCrank runs on small SR44 silver oxide cells, two in each crank. These are available all over the place. Verve say that if you ride three hours a day, four days a week, you’ll only need to replace the batteries once a year, and you can easily do it yourself.

Verve’s first chainset comes in a 110mm bolt-circle diameter (five bolts) with compact chainrings – 50-tooth and 34-tooth. A 52/36-tooth model will be available too. It uses a 30mm axle with forged chainrings from Praxis. (Praxis won’t make a 53-tooth 110BCD chainring, but in theory you could fit one from another brand).

InfoCrank will work with a 68mm wide English threaded bottom bracket, (most 24mm axle installations using threaded bearing cups can be converted to accept the 30mm axle) or with a BB30/PF30 frame. There are no BB86 or BB90 options, for example, at the moment. Check the Verve Cycling website for more information on compatibility.

InfoCrank uses ANT+ wireless communication protocol so it can talk to an ANT+ compatible bike computer, like a Garmin Edge, for instance. Of course, that computer needs to have options for power readings, including left/right power balance.

If you don’t already have a compatible bike computer, InfoCrank offers GPS-enabled computers that will do the job.

Verve say that you’ll never need to recalibrate the InfoCrank unless you damage your crank arm in a crash. In that case, you can just hit ‘calibrate’ on your bike computer to reset it.

Go to www.vervecycling.com where you’ll soon be able to pre-order.

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been road.cc technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment

7 comments

Avatar
Ham-planet | 10 years ago
0 likes

The system also measures your torque (in Nm)

I assume by 'Nm' you are referring to newton-metres, the SI unit of torque? You should be aware that when combining unit symbols to indicate a compound unit, the SI requires either a half-high dot ('N·m') or a space ('N m') between the unit symbols.

Avatar
RobD | 10 years ago
0 likes

The value for this doesn't appear to be too bad considering it's the complete crank and chainrings etc, not exactly cheap, but when you consider the stages ones are just a left side crank arm this looks quite good, Especially if the prices start to come down in a few years.
Nice to see them using the Praxis works chain rings, they really are great.

Avatar
morethansonglyrics | 10 years ago
0 likes

Will a power meter ever reach a price point to hit a regular cyclist market?

Avatar
giobox replied to morethansonglyrics | 10 years ago
0 likes
morethansonglyrics wrote:

Will a power meter ever reach a price point to hit a regular cyclist market?

The Stages meters are starting at $700 now - I think that's getting damn close. Sadly the UK price isn't as attractive, largely due to the whopping 20% VAT that Americans avoid.

Avatar
Gasman Jim | 10 years ago
0 likes

Interested to see what DC Rainmaker, THE powermeter guru, makes of them.

Avatar
giobox replied to Gasman Jim | 10 years ago
0 likes
Gasman Jim wrote:

Interested to see what DC Rainmaker, THE powermeter guru, makes of them.

Agreed. That guy's site is indispensable.

Avatar
DrJDog | 10 years ago
0 likes

Why doesn't someone make a power meter in the spindle? Seems like it is the cheapest part of the crankset componentry to manufacture (also has lowest rotational energy  21

Latest Comments