By providing a shock-absorbing layer of crushable material around your head, a cycling helmet is intended to reduce the damage if you are unfortunate enough to come off your bike and hit your head. Cycling helmets have come a long way in weight, fit and ventilation since the heavy brain buckets of the 1970s, so let's take a look at the features and details you'll find in a modern lid.
A cycling helmet comprises a thick layer that provides shock absorption, with soft cushioning for comfort where it rests on the head. The main shock-absorbing layer is almost always made from polystyrene foam, though there have been attempts to use polyurethane foam and treated cardboard.
Between the green and black sections of co-moulded outer shell you can see the shock-absorbing polystyrene
A thin plastic shell covers the foam to protect it from everyday nicks and scrapes. This shell is usually 'co-moulded' or 'in-moulded', that is, the outer shell is placed in the mould and then the polystyrene layer is formed into it.
A few helmets still have thicker hard plastic shells, which provide some shock absorption in addition to the polystyrene layer, but add weight.
The shock-absorbing layer and shell are held on the head with straps, usually made from some sort of synthetic fabric webbing and closed with a buckle. There's almost always an additional cradle at the back of the head to stabilise the helmet by grabbing the occipital protuberance near the base of your skull.
Big vents in modern helmets help keep your head cool.
Since polystyrene foam is an insulator, helmets need ventilation to stop the rider's head from overheating. Early helmets simply had holes in the shell. Modern designs use channels inside the shell that allow air to flow over the rider's head.
Many helmets have dial adjusters to tweak the fit
For a helmet to stay in place and be comfortable, it must be adjusted to fit the wearer's head. Most helmets have some sort of mechanism to adjust the fit on the occipital cradle at the rear of the helmet.
Internal reinforcement helps high-end helmets meet standards while shedding weight
Some helmets have internal reinforcing skeletons to hold them together in an impact. This allows for larger vents and air channels, and usually a lighter helmet, but the complication of including extra components in the moulding makes such helmets more expensive.
Impact absorption standards
In the European Union, helmets must meet the EN 1078 standard, which calls for a deceleration of no more that 250g to be transmitted to the head in an impact at 5.42-5.52 m/s (a little over 12 mph). The standard involves impacts on a flat surface and a kerbstone.
In the US a Consumer Product Safety Commission (CPSC) standard applies. The two are roughly equivalent in terms of impact absorption.
MIPS stands for Multi-Directional Impact Protection System. A MIPS helmet is claimed to offer additional protection against rotational forces in a crash, by allowing two layers of the helmet to move independently. The idea is that the outer layer moves when you hit your head, absorbing the rotational forces of the impact. MIPS was developed by the Karolinska Hospital and the Royal Institute of Technology in Stockholm, Sweden, so it's not proprietary to any one helmet maker. Helmet makers offering MIPS helmets include Giro, Scott, Smith, Bern, Bontrager, Giant, and Bell.
In practice, anything under about 300g is light enough that its weight won't be annoying.
The cheapest helmets cost around a tenner, but decently ventilated ones start from around £30. Helmets for general use go up to almost £200 while aerodynamic time trial helmets can cost £250.
Peaks and visors
A peak helps keep the sun out of your eyes or the rain off your glasses
Helmets intended for mountain biking often have a peak or visor, which provides a degree of shade for the rider's eyes. The styling comes from motocross, but peaks are useful on the road too. They provide shade in summer, keep the rain off your glasses in winter and annoy people stupid enough to take The Rules seriously.
An aero helmet will shave another few seconds off your 25-mile time trial time
Dedicated time trial specialists use helmets shaped to cut through the air, with smooth shells and long tails. Their shape has earned these helmets the nickname 'sperm hats'. They're effective if the tail is near the rider's back, but some find the effort of maintaining the right position fatiguing. Helmets with shorter, rounded tails provide most of the benefits without causing aerodynamic problems if you look down.
Giro's Air Attack was one of the first 'aero road' helmets with fewer vents for better aerodynamics
A recent trend is for helmets with minimal ventilation and smooth outer shells to reduce air resistance for general road racing.
Is this on right? (CC BY-NC-ND 2.0 Arnaud Lancelevee/Flickr)
Helmets for toddlers carried in child seats often have little or no ventilation so they help keep junior's head warm.
For older kids, helmet design is very similar to lids for adults, with the exception that they have buckles that release if the helmet gets caught on something so the straps don't throttle the child.
The airbag alternative
A radically different approach is the Hövding cycling airbag, which comprises a collar that rapidly expands into a head-enclosing airbag when it senses movement consistent with a crash. At £249 it's not cheap, though some top-of-the-line racing helmets are similarly spendy.
Hövding claims to provide "the world's best shock absorption capacity", an unusual statement for a head protection manufacturer, most of which seem to carefully avoid making any claims at all about their efficacy against impacts, aside from specifying the standards they meet.
The aim of road.cc buyer's guides is to give you the most, authoritative, objective and up-to-date buying advice. We continuously update and republish our guides, checking prices, availability and looking for the best deals.
Our guides include links to websites where you can buy the featured products. Like most sites we make a small amount of money if you buy something after clicking on one of those links. We want you to be happy with what you buy, so we only include a product in a if we think it's one of the best of its kind.
As far as possible that means recommending equipment that we have actually reviewed, but we also include products that are popular, highly-regarded benchmarks in their categories.