Support road.cc

Like this site? Help us to make it better.

Canyon unpainted grey/black frames

Anyone out there with a Canyon Ultimate/Aeroad/etc in unpainted grey/black?

I just splashed out on an Ultimate and am disappointed to see blemish (colour variation and markings) on seat tube and down tube. It's not surface damage, it's within the frame material. The rest of the bike is perfect uniform colour.

Canyon say: "The blemishes you are seeing on the bike are simply carbon finishes and are common on a our bikes due to the natural, raw finish rather than a painted finish."

This may well be true, but just wondering whether anyone/everyone else's frame do indeed have similar markings, or whether I've been sent something from their "seconds" (i.e. reject) pile?!

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

13 comments

Avatar
CanyonChloe | 6 years ago
1 like

Hi dkr,

 

It's Chloe here from Canyon!

 

Thanks for your query regarding the carbon finish on our bikes.

Many of our carbon frames and forks are supplied in their unpainted raw state, which intentionally shows the carbon weave and layup used in the manufacturing process. This is in no means a manufacturing defect and is common practice among many other high-end bike brands. The advantages of this unpainted finish are both less weight and no issues with paint rubbing or scratching over time.

Every bike is built from scratch for each order that is placed so we would never send you a second hand bike and this feature is certainly not one of those of a second hand bike, it's common for any of our bikes in the Stealth carbon finish.

I actually personally really like this finish and no two bikes will ever have the exact same carbon fibre layup therefore your bike is totally unique in terms of it's finish.

 

Please don't hesitate to contact us if you have any further queries!

 

Thanks  1

CanyonChloe

Avatar
sm | 6 years ago
0 likes

I've a Canyon ultimate in matt black, no blemishes​ or differences in colour. Perhaps mine was painted or I'm not looking hard enough. I'd read about this effect on a lot of Rose bikes which is one of the reasons I chose Canyon. A few grams of paint versus an unsightly frame? Easy choice.

Avatar
Jogle | 6 years ago
0 likes

I also have a Stealth Ultimate CF SLX, complete with lines where some of the layers join.

Avatar
pablo | 6 years ago
0 likes

Totally normal. Bike frames are hand layed so each one is unique. They are normally painted or have a cosmetic carbon outer layer (think supercars) to tidy it up but this adds a bit of weight. Ironically bear carbon probably works out a little cheaper for a manufacturer but they probably get more returns because people think something is wrong with them

Avatar
massivecompacthalo | 6 years ago
0 likes

I have the Aeroad CF and it's exactly as you described. When I first got it I was a little shocked, but now I'm used to it.

Avatar
surly_by_name | 6 years ago
0 likes

I own a Canyon CF SLX with an unpainted finish which has colour variation and markings as between different parts of the frame. 

No one but Canyon knows whether you've been sent something from their "seconds" (i.e. reject) pile.

Avatar
macrophotofly | 6 years ago
0 likes

The weird patterns are generated by final carbon mat used on the outside layer as the plastic is injected (or prepreg is cooked). Both Unidirectional (fibres in a single direction creating a very specific directional strength) and Continuous Strand (swirls of continuous fiber strands providing equal strength in all directions) are prefereable to the excess weight of a pretty woven mat as the final layer and have a more random blemish-like finish. Yes the finish is not as geometrically satisfying, but these finishes are functionally better and (circa 50g) lighter than pretty mats or paint.

The best way to check if it is fine, is to shut your eyes and run your finger over the finish. You should not feel any holes or non-plastic material coming through. If the finish is smooth then the bike is without an exterior issue on these naked frames

Avatar
Jimthebikeguy.com | 6 years ago
0 likes

Agreed. My gt grade is entirely naked carbon, and has all sorts of weird patterns. Its normal.

Avatar
StraelGuy | 6 years ago
0 likes

The black areas on my carbon Giant are unpainted and do have a marble sort of look in strong light. It's just carbon being carbon. If you want pure black then you'd have to go painted.

Avatar
Canyon48 | 6 years ago
0 likes

I've heard about this before online and on this forum, see here.

It clearly isn't only Canyon bikes, it applies to many lightweight carbon frames and components. Having seen the carbon manufacturing process first hand, most parts do end up with variations in colour.

Part of the weight saving comes from having very little, if any, cosmetic paintwork - as Canyon has said, that is just what carbon fibre looks like.

Though my Canyon is Gran Tourismo Blue, the top of the top tube is matt black. I think it is painted, but there are some very very subtle variations in colour (same with the seatpost and bar/stem.

Avatar
youngoldbloke | 6 years ago
1 like

I have a UD unpainted matt carbon Rose . To me the finish looks like grey black marble. It is normal. I like it.

Avatar
sergius replied to youngoldbloke | 6 years ago
1 like

youngoldbloke wrote:

I have a UD unpainted matt carbon Rose . To me the finish looks like grey black marble. It is normal. I like it.

 

Exactly the same on my Rose, I kinda like it, especially when it's all waxed and shiny

Avatar
Johnnyvee | 6 years ago
0 likes

I don't have a canyon but do have a carbon frame with unpainted areas and there is variation in mine. Frame is good though so possibly the norm though I'm sure a number of canyon owners will be along shortly....

Latest Comments