Support road.cc

Like this site? Help us to make it better.

review

See.Sense. 2.0 light set

8
£79.99

VERDICT:

8
10
Very bright, clever lights; maybe a bit too clever for their own good
Weight: 
108g

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

See.Sense. lights can detect your motion, orientation, ambient light and car headlights, and your current mood* (*this one might not be true). They use this information to adjust their brightness and speed of flash to alert cars or other vehicles to your presence on the road.

What they show in their video does really happen - the lights flashed more when I pulled away from a junction, were brighter when it got darker and generally did clever things to help me stay visible to drivers.

See.Sense. lights claim to be not just bright, but intelligent. To address their first claim, they certainly are bright. At 160 lumens for their front light and 95 for the rear, there was certainly no SMIDSY (Sorry mate I didn't see you) with these blinders on. When I first turned on the light, having of course not read the instructions, I blinded myself for several minutes - take this as a warning and if you buy these lights on no account turn them on with the with the Cree LEDs facing towards you.

Therein lay one of the problems for the front light, though. With no hood, the light was simply too bright for me, and in flashing mode (the default setting) it left me seeing stars. However, this is where the intelligent part comes in. The brightness could be adjusted downwards and I could also personalise the light to be on a steady beam rather than flashing. The beam has a spread of around 180 degrees which is great for the rear light as I could be seen from the side, but unhelpful on the front light, as even when angled down it dazzled. When asked about this, the manufacturers said that a few which had been returned had makeshift gaffer tape hoods on, so this will be something for their next model.

The other issue with the brightness was when fitting the lights to my bike. They attach with a rubber ladder which grips the bars, but the lights have to be turned on first (3 quarter turns clockwise) so then you are left with 160 lumens beaming up at you whilst you try to tighten the rubber round your handlebar or stem.

The lights need turning 3 times (very Wizard of Oz) to turn them on because there are no buttons. Not one. Really. Which is a pity, because it would have made operating them a damn sight easier. See.Sense. chose not to have buttons to minimise the opportunities for water ingress, but there is a rubber cover for the USB charging port so surely a rubber button wouldn't have been too hard to engineer.

I won't claim that changing modes and settings on the See.Sense. is intuitive, and the company seem to agree as they have provided video guides on their website. Personally, if I need to watch a video to find out how to work a bike light, then the light is too complicated. The other option of course is that I'm too stupid. After a personal demo from the makers at The Bike Show I understood the 'turn clockwise to change the mode, turn anti-clockwise to change the setting' approach. It was a bit hit and miss even then but once your settings are in (medium bright and steady for the front, bright and flashing on the back in my case) then the lights remember them.

The lights do, however, turn off on their own - either after 3 minutes when you have been using them and you are stationary. After this they use the motion sensors to turn back on straight away, for example as I pulled away from a particularly tiresome set of traffic lights. If you are finished for the night, then placing the lights face down turns them off properly.

Because there is no button, the lights didn't turn on fully when being carried in my bag. A jolt would make the mini green initial movement sensor light up for a moment, but I couldn't perform the necessary 3 quarter turns to fully turn the See.Sense. on by accident, so the batteries weren't wasted.

Talking of batteries, as the lights change according to the usage there was no definitive run test to take, but in real life I got about a week (12-15 hours) of use between charges. There is a fuel gauge red led, but I found this a bit hard to read (you have to count how many red blips out of 7 red and green blips there are to tell how much juice is left).

We clocked the total weight of a pair of lights at 108g, fitting well with the manufacturer's claims of 55g per light. The lens is apparently made from Apollo helmet visors (or maybe that was the same material rather than the actual visor) and the body is Luran S, an ASA plastic which was extremely tough and withstood knocks and bumps without marking in daily use.

Each light is 5.8 x 3.8 x 4.8 cm and the same moulding has been used for the front and the rear lights. This raises an oddity, where the curve of the rear light casing sits well on a seat post or stem, but looks wonky when handlebar mounted. See.Sense. have made a bit of a Heath Robinson fix with an additional rubber mount, but this was a faff to use and the wide angle of the beam meant that the wonkiness was cosmetic rather than affecting the spread of the beam.

The See.Sense. made me feel safer on the road - especially the differing flash rates according to my speed. At £79.99 for the pair, I would probably invest in the back light for all the riders in my family, but wait for the front light to be modified before paying for the full set.

Verdict

Very bright, clever lights; maybe a bit too clever for their own good

road.cc test report

Make and model: See.Sense. 2.0 Front and Rear Set

Size tested: n/a

Tell us what the light is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

See.Sense. says:

Get some road sense with the See.Sense. intelligent front and rear light set. These tiny, clever lights help make you more visible - flashing brightest when a cyclist needs it most. Seriously bright LED's, long run-time, USB rechargeable, no switches, weatherproof, lightweight, widely-dispersed light, strong mount. See.Sense has it all.

Tell us some more about the technical aspects of the light?

Auto on/off. A new auto standby has been perfected to put the lights to sleep after 3 minutes of inactivity and wake them up the next time the bike moves.

Improved standby-time. Power consumption has been reduced in standby mode, giving 12 times longer standby time.

Increased brightness. LED technology moves at an extraordinary pace so the light has been updated to deliver to 11 extra lumens with no impact on runtime.

Revised design and firmware. Minor changes to further enhance the performance and reliability of every See.Sense.

Rate the light for quality of construction:
 
8/10

Very robust.

Rate the light for design and ease of use. How simple was the light to use?
 
3/10

Really tough to change the settings without paying a lot of attention.

Rate the light for the design and usability of the clamping system/s
 
6/10

Average rubber ladder.

Rate the light for waterproofing. How did it stand up to the elements?
 
9/10

No problems even in heavy rain.

Rate the light for battery life. How long did it last? How long did it take to recharge?
 
8/10

Comes with a very short USB cable.

Rate the light for performance:
 
10/10

It is very, very bright.

Rate the light for durability:
 
9/10

Tough to scratch and passed the drop test with ease.

Rate the light for weight, if applicable:
 
7/10

55g per light.

Rate the light for value:
 
8/10

Good value considering the R&D put into these lights.

Tell us what you particularly liked about the light

The motion sensing.

Tell us what you particularly disliked about the light

The confusing series of quarter turns to switch the settings.

Did you enjoy using the light? It was a bit too much hard work understanding it.

Would you consider buying the light? Yes, the rear light.

Would you recommend the light to a friend? Yes.

Anything further to say about the light in conclusion?

A very good new light on the market, with room for improvement in later models.

Overall rating: 8/10

About the tester

Age: 36  Height: 5'7  Weight: size 16

I usually ride: Trek 7.5 WSD  My best bike is: Turquoise Cruiser

I've been riding for: Under 5 years  I ride: Most days  I would class myself as: Novice

I regularly do the following types of riding: commuting, general fitness riding, Leisure

 

Add new comment

18 comments

Avatar
bivvy | 9 years ago
0 likes

This is nice and innovative. But surely you would be better mounting two much cheaper and still very brights lights. One could be set to high flash and it could easily be angled so it shines into the driver's eye as he gets close.

Avatar
David R | 9 years ago
0 likes

I've been using these all winter, both front and rear, great lights. Certainly get you seen in traffic. Front works well on head tube. Daytime mode is great too and the default "intelligent" sensor settings work well. Would highly recommend.

Avatar
Rouboy | 9 years ago
0 likes

Best rear light I have ever owned

Avatar
CanAmSteve | 9 years ago
0 likes

I agree - great lights but just a bit too hi-tech for their own good. I have both - the front I mount down low (around the head tube) so I don't get too much stray light, but then I ride mostly in the day anyway. The rear is very noticeable and does vary with lighting and movement.

Mine both need four really sharp "flings" left and right to get them to turn on or off, so like others, I just leave them on and recharge when necessary (I don't have to remove them when I'm done riding). They hold a charge very well - a month without use (at least when new).

I read the mode instructions, set them to flash and filed it - waaaaay too complicated. And yes, a wee on/off button/slide would be a huge improvement.

Avatar
bendertherobot | 9 years ago
0 likes

They're really quite simple if you avoid changing the modes. All I wanted was a good flashing rear. I never put mine on steady so this works fine.

Above all these are brilliantly visible lights. They flash more when someone comes up behind you, flash fast when you brake and pull off.

You don't HAVE To take them off the bars or seatpost to turn them on. You just pull them out a bit. See the website for example. They also last for ages.

The point to the front one is not to light your way. It's as your extra flasher. TBH the front one needs a small visor IMO as it's visible in your line of sight.

But the rear is the best light I've owned.

Avatar
Shouldbeinbed | 9 years ago
0 likes

I'm with @Bez. I was reading the review wondering if it had slipped out a couple of days too soon for an April fool spoof. Twist them this way for this function, another way to do something else, blind yourself attaching them.

It's also not clear from the explanation where the pivot point is built in and how the twist function would prevent hard driven rain or simple capillary water ingress any better than a well sealed switch would?

Avatar
bdsl replied to Shouldbeinbed | 9 years ago
0 likes
Shouldbeinbed wrote:

I'm with @Bez. I was reading the review wondering if it had slipped out a couple of days too soon for an April fool spoof. Twist them this way for this function, another way to do something else, blind yourself attaching them.

It's also not clear from the explanation where the pivot point is built in and how the twist function would prevent hard driven rain or simple capillary water ingress any better than a well sealed switch would?

You don't twist one part of the light against another part. You twist the whole thing and it reacts to the change in direction of gravity.

Avatar
mikroos | 9 years ago
1 like

Ummm... What's the point of the LED being brighter in dark environments? Shouldn't it work exactly the opposite way: the more ambient light, the brighter the LED to make it stand out more? On unlit roads it could use less energy as it would be visible anyway.

Avatar
Yorky-M | 9 years ago
0 likes

Well , my fav cycling item of 2014. used all winter and continue to use in daylight. this is a safety item we ALL should use. Cars do give you extra room cause they see you earlier. SUPER innovation.

Avatar
Yorky-M | 9 years ago
0 likes

Well , my fav cycling item of 2014. used all winter and continue to use in daylight. this is a safety item we ALL should use. Cars do give you extra room cause they see you earlier. SUPER innovation.

Avatar
Zermattjohn | 9 years ago
0 likes

I had to send my rear one of these back. Agree that having to blind yourself while putting it on your bike is a massive design fault, a wee button would have saved it. I couldn't figure out how to change the settings either - bit too clever for its own good really.

Avatar
oldstrath replied to Zermattjohn | 9 years ago
0 likes
Zermattjohn wrote:

I had to send my rear one of these back. Agree that having to blind yourself while putting it on your bike is a massive design fault, a wee button would have saved it. I couldn't figure out how to change the settings either - bit too clever for its own good really.

Don't know about the front, but putting rear on without blinding oneself is pretty easy. I also don't find the mode setting terribly hard - the manual is pretty clear to my mind. Certainly the rear is a good light.

Avatar
Bez | 9 years ago
0 likes

Following on from your Knog review, I should reiterate that [every.time.] [a.journalist.] [propagates.a.] [company.'s.fickle.] [bastardisation.of.] [grammar.and.] [punctuation.God.] [kills.a.] [kitten.by.] [shoving.interrobangs.] [up.its.] [bottom.until.] [it.bursts.] [..]

Anyway, these sound like a whole heap of fun to use. They make my lights, some of which require me to press a button and others of which just come on when the wheels roll, seem a bit too easy and boring and nowhere near enough like having to do a Crystal Maze challenge before breakfast every morning.

Progress, eh  1

Avatar
Caroline Dodgson replied to Bez | 9 years ago
0 likes

I hate kittens anyway.

Avatar
themartincox | 9 years ago
0 likes

Absolutely spot-on review! I use the rear light and love it, it garners plenty of comments from other riders, and even drivers at lights when they've seen the changing light patterns.

Very bright, very effective , but a bit fiddly!

Avatar
Caroline Dodgson | 9 years ago
0 likes

There are brighter models available. It was fine in the park which was completely dark but I would still class this version as a be seen light rather than your only source on an unlit road.

Avatar
Caroline Dodgson | 9 years ago
0 likes

There are brighter models available. It was fine in the park which was completely dark but I would still class this version as a be seen light rather than your only source on an unlit road.

Avatar
eclecticcyclist | 9 years ago
0 likes

160 lumen might be bright for a marker light for town riding but would be useless for fast riding on unlit country lanes. Last thing I want to be doing is crawling along at 10mph or less because I can't see potholes or the verge.

Latest Comments