Support road.cc

Like this site? Help us to make it better.

Ultegra rear mech help

Hi guys,
Looking for gearing help, I'm putting together a new bike and upgrading the groupset, however I've started pulling out my hair a bit... please can anyone help?

I'm upgrading to a Ultegra groupset (6700), running a 11-28 rear cassette on a compact 50:34t
Question: Should I run a short cage or a medium cage on the rear mech ?

thanks in advance

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

6 comments

Avatar
Al'76 | 9 years ago
0 likes

Why would you need a 32 if you're running a compact? Not quite sure why you'd need a 28 with a compact, but there we go  24

Avatar
keirik replied to Al'76 | 9 years ago
0 likes

that bait is really smelly  3

Avatar
Shamblesuk | 9 years ago
0 likes

Or get a medium cage if you may be thinking of using a 32t eg on alpine climbs. Negligible weight difference.....

I have Dura Ace but have an Ultegra long cage for a 32 Ultegra block I will use for the E'tape.

Avatar
peted76 | 9 years ago
0 likes

Thanks guys, that is brill!

Avatar
therevokid | 9 years ago
0 likes

shimano's own tech blurb says 28t max so you're good to go with
the better looking SS  1

http://techdocs.shimano.com/media/techdocs/content/cycle/SI/SI_5X90B/SI-...

Avatar
srchar | 9 years ago
0 likes

You have a 33 tooth difference (28-11+50-34). Ultegra 6700 short cage mech has a capacity of 34 teeth (cf. Wiggle's spec page).

Short cage looks nicer and has enough capacity, so go with that.

Latest Comments