Support road.cc

Like this site? Help us to make it better.

Enve reveal latest SES Aero Road handlebar with Di2 integration

The SES Aero Road Bar from the high end component brand now takes a Di2 junction box on the bar end, and they've also released a new titanium quick release skewer

The revamped SES Aero Road Bar is the stiffest and most race-orientated in their line-up, say Enve themselves. 

While it's not immediately apparent how the latest bar is different from the current version, the biggest difference is that you can now house a electronic shifting junction box in the bar ends, which Enve have achieved by lengthening the drops. If you don't require this then the bars come ready to go with Enve's own integrated bar end plugs. The bars are aero-optimised in the wind tunnel and are made from 100% uni-directional carbon fiber for ultimate stiffness. All your wires can be routed fully through the bars to create the cleanest front end possible for optimised aero efficiency, and Enve have improved the routing to make fitting easier.  

Enve bars 2.png

Enve's integrated bar ends can be swapped out for Shimano's bar end Di2 junction box solution

 

While it's all very well making the bars themselves aero, Enve pay attention towards making the rider aero too being as that's what will cause most of your drag on-bike; so the bars have been kept narrow at the top to ease the rider into a more aero position. The drops have 25mm of flare either side for wrist clearance and confident handling. 

They weigh in at 249g and are also compatible with Enve's SES clip-on extensions for TT efforts, and have a standard 31.8 clamp size. They're available in 40, 42, 44 or 46cm, and the UK RRP set at a whopping £400. 
 

Enve new QR.png

The new skewers have a clean look and are titanium for max strength

 

Enve have also announced the release of a new titanium quick release skewer, purported to be super strong and easy to use. It's available for both rim and disc brake wheelsets, with the rim version weighing 87g and the disc version 89g. US prices are set at $89 each. 

 

 

Arriving at road.cc in 2017 via 220 Triathlon Magazine, Jack dipped his toe in most jobs on the site and over at eBikeTips before being named the new editor of road.cc in 2020, much to his surprise. His cycling life began during his students days, when he cobbled together a few hundred quid off the back of a hard winter selling hats (long story) and bought his first road bike - a Trek 1.1 that was quickly relegated to winter steed, before it was sadly pinched a few years later. Creatively replacing it with a Trek 1.2, Jack mostly rides this bike around local cycle paths nowadays, but when he wants to get the racer out and be competitive his preferred events are time trials, sportives, triathlons and pogo sticking - the latter being another long story.  

Add new comment

4 comments

Avatar
part_robot | 6 years ago
0 likes

It's worth noting regarding my above remark that Canyon Ultimate stems are wider than most others (1-1/4" steerer). For that reason you may have issues if you have lots of things mounted. You'd definitely not be able to mount aero bars.

Avatar
paulrattew replied to part_robot | 6 years ago
0 likes

part_robot wrote:

It's worth noting regarding my above remark that Canyon Ultimate stems are wider than most others (1-1/4" steerer). For that reason you may have issues if you have lots of things mounted. You'd definitely not be able to mount aero bars.

 

You definitely can't fit normal aero bars with any normal stem to these bars. Enve have their own special aero bars that are designed for this bar. Major problem with them though is that you can't adjust the height of the arm rests

http://enve.com/products/ses-aero-road-bar-clip-on-extensions/ 

Avatar
paulrattew | 6 years ago
0 likes

I've got the old version, which I love. The big degree of flare takes a bit of getting used to, but I definitely prefer it to bars with no flare. I've got a fizik stem with a barfly garmin mount that attaches to the faceplate of the stem, so doesn't need any clamping space on the bar.

It's not the most practical bar if you want to attach lots of things to the bars as the clamping zone is only a tiny bit wider than a stem. The main thing that I would like to improve though is the positioning of the internal routing holes - I'm running hydraulic disc brakes and the routing is a little bit awkward on the bars. Difficult to tell whether they have improved this from the pictures

Avatar
part_robot | 6 years ago
0 likes

Hah, I was asking them about the junction box the other day. Pity there's zero clamping area; they barely fit Canyon stems let alone GPS, phone, lights, whatever. Otherwise great bars. Stupid price now though  7

Latest Comments