Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Video teaser of Shimano’s next-generation Dura-Ace mechanical groupset

Improved brakes, lighter rear mech and stiffer chainset for the new Dura-Ace?

Is Shimano aiming to make its next generation Dura-Ace mechanical groupset the lightest it’s ever been? And will it unveil a carbon fibre chainset?

Rumours of a new version of Shimano’s flagship Dura-Ace groupset were confirmed earlier this year when photos were leaked on the internet. The photos didn’t tell us much, other than to confirm that it appears the company is sticking with an 11-speed drivetrain, and not going up to 12. 

- New Shimano Dura-Ace 9100 breaks cover… and it's not 12-speed

Now we’ve unearthed a video - which has just been taken down, not before we managed to get screengrabs below - that provides a bit more information on the new groupset, but we’ve yet to get any concrete details out of Shimano yet. From the video, it’s clear Shimano has radically redesigned the rear mech, with a much more angular design reminiscent of one of its mountain bike rear mechs.

shimano new cranks.png

Shimano also appears to have taken the Shadow technology from one of its mountain bike rear mechs, which has different cable routeing and a more compact profile than the previous version so it sticks out from the frame less than the old version. It appears to have made the main body much smaller too, which suggests to us that Shimano might be aiming to make the groupset lighter, to ensure mechanical is still relevant in this era of electronic groupsets. 

shimano dura-ace.png

The new chainset is a big departure from the previous Dura-Ace crank, too. It has massive crank arms, and could it be made from carbon fibre? It’s tricky to tell from the video, it’s not the best quality. We can tell that Shimano has stuck to a four-arm spider.

Shimano has traditionally veered away from using carbon because its own testing showed that while carbon might provide lower weight, it’s not as rigid as aluminium. That didn’t stop the company releasing, for a very short time, a carbon fibre Dura-Ace chainset way back in 2007. It used an aluminium core with a carbon fibre shell and weighed 709g. The switch to plastic would account for the huge increase in size compared to a current Dura-Ace crankset.

And has Shimano updated the brake callipers as well? These appear to be direct mount, and previously when Shimano has released a new Dura-Ace groupset the brakes have offered a big leap in braking performance. 

Direct mount is relatively new, it’s only been around for a few years, so it could be Shimano has found some way to improve them. Though Dura-Ace is a race groupset, it might have increased the tyre clearance in a nod to the growing trend for wider tyres. 

That's about all we can tell you at this stage, and we might be completely wrong about all our assumptions. We should hopefully find out soon.

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment

6 comments

Avatar
james_from_stoke | 7 years ago
0 likes

the best bit about dura ace 9000 was the shiny silver stuff - it made it stand out a bit and set it aside from ultegra. this (assuming it is genuine) doesn't have half the bling factor - it looks cheap.

Avatar
bikeandy61 | 7 years ago
0 likes

Read a factiry tour in Cyclist recently and the question of carbon cranks came up. The responce was that (at the time) testing had shown that to get comparable stiffness carbon weighed more than a forged alloy crank. Of course maybe going massively oversized could maybe address that. But I do like the idea of an integrated power meter. After all the big S does have some experience with electronics be it bike computers at one time, Di2 or sports cameras.

Avatar
tritecommentbot replied to bikeandy61 | 7 years ago
0 likes
bikeandy61 wrote:

Read a factiry tour in Cyclist recently and the question of carbon cranks came up. The responce was that (at the time) testing had shown that to get comparable stiffness carbon weighed more than a forged alloy crank. Of course maybe going massively oversized could maybe address that. But I do like the idea of an integrated power meter. After all the big S does have some experience with electronics be it bike computers at one time, Di2 or sports cameras.

 

The price would be astronomical though. Just put it way out of the reach of most guys. Maybe that's okay though. Current gen Dura Ace is becoming very affordable now and is fantastic. 

 

I'd like to see a fully integrated groupset. Power meter and cadence all tucked away nicely out of view.

Avatar
tritecommentbot | 7 years ago
0 likes

Need to readjust my perceptions of the crank heirarchy. At the moment it looks cheaper to me because it's more similar to the current gen Ultegra colour. By next Spring we'll all be wanting it and associating it with high value no doubt.

 

Need some stats! 

Avatar
joopi | 7 years ago
1 like

A built-in powermeter explaining that rather lumpy crank?

Avatar
TypeVertigo replied to joopi | 7 years ago
1 like
joopi wrote:

A built-in powermeter explaining that rather lumpy crank?

Elsewhere in the world, Shimano are certainly attempting to prototype it with the current Dura-Ace FC-9000 crank.

http://cyclingtips.com/2016/06/prototype-shimano-power-meter-and-shoes-s...

Their approach is most similar to Pioneer's, with a few differences.

Latest Comments