If you have a disc-ready frame or you're thinking of getting one, and want to step up to hydraulics without a massive spend on parts, Hope's V-Twin Hydraulic Disc Brake Converters make it easy. Plus, you get better braking and, for cyclo-cross riders, more time to drink tea and relax.
Hydraulic disc brakes on cyclo-cross and road bikes are now officially the Next Big Thing. After a few years of will they-won't they, mostly in discussion forums on the internet, both Big S's have recently made the leap into production with integrated gear and hydraulic brake units which means the floodgates are open for disc brakes to sweep across a whole new swathe of bikes. Whether you like it or not.
Hope were ahead of this little game by a good decade or so with a road bike cable disc and a cable-to-hydraulic converter that both briefly saw the light of day but were quietly shelved until a couple of years ago when they launched the new V-Twin to meet a nascent market head on.
Hope have been making mountainbike disc brakes for years now in their high-tech shed in Barnoldswick so they should know how this sort of thing works. The CNC machined V-Twin converts cable pull into hydraulic push via an extremely simple in-line piston system. The V-Twin has already been performing pretty well in the hands of Hope team cyclo-cross riders, winning both standard cyclo-cross races and the legendary Three Peaks.
With the big boys finally coming out with hydraulic brake options for drop-barred bikes the Hope system could be seen as instantly obsolete. However, there are enough people out there with disc-ready bikes who want to go hydraulic, or who are looking to procure a disc-ready frame but who don't want to or aren't able to stump up the cash to buy into a whole new bunch of components and want something to fit in with the bits that they already have. Luckily the Hope V-Twin slips easily between all your existing components with not too much expense and very little faff.
Fitting without faff
The V-Twin kit comes with the cable-to-hydraulic adaptor unit, front and rear X2 brake calipers and pre-bled hoses joining them all together. You'll need to buy some rotors.
Fitting the V-Twin is remarkably easy.The hardest bit is getting a nice, smooth, kink-free brake cable run from the handlebars to the adaptor. Any fears about putting it all together can be swiftly put aside by watching this video which cheerfully explains it in easy step-by-step terms.
Threading the cables into the V-Twin adaptor is probably less complicated than setting up a pair of cantilever brakes and takes less time to do than it takes for the cup of tea to go cold that you made to drink while you do the job.
Unlike cable discs there's no fiddly fingers-and-thumbs pad alignment set up at the disc end. You simply centre the X2 caliper over the disc and tighten the mounting bolts. That's all the tinkering you'll ever have to do ever as the pads float on the self-centering hydraulic pistons.
You may have to give them a clean once in a while to free them of accumulated gunk but that's it. It's possible for the fitting process to be a simple 'out of the box and forget job' if you want, but we chopped the hoses to get clean lines over the bike and remove flappy loops just waiting to catch undergrowth, and then we bled the system, just to be sure.
As a unit it's tidy and not bulky, hiding mostly unnoticed under the stem. From the saddle all you can see is the curve of the brake cables entering the V-Twin. As the mounting bracket is a slim sheet of stainless steel it takes up the smallest amount of room in the ahead stack if you like a slammed stem.
It's more weighty all in than a cantilever set up but the trade off with performance will be worth it for most. If you're serious about these things you can offset the weight issue by running lighter rims that don't need to be beefed up for braking.
The first thing to notice is that lever throw before the pads bite is very very very minimal, pull the lever and the brake is instantly on. This will vex riders that prefer a lot of lever movement before the brake kicks in or those with smaller hands that need the levers set close to the bars to work.
As the pads wear the amount of travel at the lever does increase and thankfully it leads to an easier brake to control. You can adjust the system with the pair of cable tension adjusters out the front of the V-Twin unit, but they only serve to tighten up the cable inside the converter should things go a bit slack, not make everything looser which is a shame.
If you definitely want more lever throw you can deliberately leave a bit of slack in the cable but that has the effect of making the lever feel loose and rattly before the brake starts to work. It would be nice if there were a more sophisticated adjustment for more lever throw and while Hope are at it they could dial in a lighter feel to the V-Twin as it's both very solid and very linear.
Feel, power and far less post-ride fuss
The levers don't have a particularly light feel in the hand, hydraulic smooth yes, but not playful and easy in the fingers, braking in the drops is easy but it can take quite a concentrated and strong pull to get the brakes to work effectively from the hoods at times.
The one thing people get over-excited about with discs on road and 'cross bikes is braking power and more specifically too much of it. You can stop wringing your hands right now about all the out of control skidding that you imagine you're going to be doing because that simply doesn't happen.
It takes no time at all for the brain to work out exactly how much effort is required to get the brakes to work and it sends signals to the fingers accordingly. Your synapses are clever like that, you just learn to pull the lever with less power or with fewer fingers; there's none of that needing to grab a full fat handful of cantilever brake just to slow down a little.
What does happen though is you get brakes that are powerful, predictable and consistent in their braking, in all conditions, wet or dry. Old fashioned rim-brake time lag between pulling the lever and stopping actually starting to happen, once the pad has worked its way through the layer of mud and water that's on the rim is a quaint relic of the past, you just stop.
Whether you ride your cross bike quickly for an hour round a field, a full day across the hills or just to work and back this is an unquestionable benefit. Snap the lever hard for a panic stop on the road or racing move, or drag the brake for a long, steep descent and the result is the same: reliable braking with no delay and no brake fade.
A welcome side-effect of this powerful and predictable braking is that you're using less effort each time you pull on the brakes so you're getting less tired, which can make a marked difference in both racing and in the last hour of that CX Sportive.
The few times there were issues with braking and traction were on recently wet roads when they were greasy, and on that very specific mud where there's a thin layer of slime over a solid surface. The lack of feel and modulation in the brakes led to skidding but in several months of riding the brakes it only happened a couple of times.
For a demonstration in the effectiveness of the V-Twin and the difference it can make to your riding compared to a traditional cantilever halted bike is to simply follow a rim-braked bike. It's a frustrating experience. The hydraulic disc brakes allow you to brake much later and much harder with much more confidence and control than the cantilevered bike and you'll be continually running into the back of it. In very little time you'll be overtaking, most likely by out-braking into a corner. Racers take note, it will change the way you ride a cyclo-cross bike.
Being a hydraulic system the Hopes immediately dispense with the problems that can plague cable discs. You don't get the creeping effects of cable contamination and as the brake pads on the V-Twin are self-centreing there's no disc rub, a plus point over some cable discs when things are muddy and pads wear enough for a cable disc to need frequent adjustment.
Aside from where the cable from the brake lever enters the master cylinder the system is closed so it's pretty immune to contamination, and as that cable interface is up the top of the bike it's well out the way of muck and grubble ingress.
Maintenance on the V-Twin is minor, and when I say minor I mean non-existent. The V-Twin has been raced and ridden in the wet and the dry over several months, short blasts round fields and long days over the hills in all conditions and spanner time has been remarkable by its absence.
The usual post ride regime of a rim-braked CX bike with frequent pad and brake cable adjustment and replacement, and keeping an eye on rim wear and wheel buckles, almost to a per-ride regularity in muddy weather has been consigned to history. None of that shed shenanigans with the V-Twins, get the bike dirty, wash the bike, carry on. Suddenly you have more spare time and more spare money as you're not buying pads or cables every week and rims every year, so if you're trying to justify stumping up the cash for these they'll pay for themselves pretty quickly in a lack of worn out pads, cables and rims.
With both SRAM and Shimano coming out with dedicated road bike disc brakes the game has suddenly been upped and the V-Twin could be seen as a stop-gap that's suddenly obsolete, but it's not. The beauty of the V-Twin is that it slots right in with whatever components you already have on your bike already so you don't have to buy in to a whole new expensive system, assuming you have a disc ready frame.
It's easy to fit and offers powerful, predictable braking whatever the conditions. If you're a racer or someone that rides their bike around the place, be that off-road or Pro commuting then these are an easy step into the future. Despite being a massive performance leap forward from rim brakes if the Hopes had a lighter feel at the lever and the ability to play around with lever travel to suit personal preference or smaller hands they would be perfect.
A sensible investment in braking power that will change the way you ride or race your cyclo-cross bike.
road.cc test report
Make and model: Hope V-Twin Hydraulic Disc Brake Converter
Size tested: n/a
Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
Hope say that as more and more CX bikes are now arriving with disc mounts fitted as standard, and with their continued participation in one of the UK toughest cycle events, the 3 Peaks Cyclo-Cross, the remote master cylinder was an obvious choice of product for them to develop. The neat dual master cylinder fits onto a special bracket under the handle bar stem, giving the powerful brakes which drop-bar bikes are usually lacking and keeps the run of cable as short as possible. The transition from cable to hydraulic is achieved with an extremely simple piston system, removing the need for complicated levers. The master cylinder is coupled with the proven X2 caliper. Their one-piece design offers the perfect combination of low weight, high stiffness and high braking performance.'
Tell us some more about the technical aspects of the product?
CNC machined in Barnoldswick, England
Integrated brake fluid reservoir
9.74 caliper with all mount options
2014 T6 aluminium alloy
Wide angle hose connector mount
Top entry pad fitting
Tell us how the product performed overall when used for its designed purpose
It brings mountainbike levels of stopping and control to the humble cross or road bike.
Tell us what you particularly liked about the product
Consistent predictable powerful braking both in the wet and the dry, the lack of maintenance and absence of brake on rim scraping noise.
Tell us what you particularly disliked about the product
Lever throw and feel could do with being longer and lighter, but apart from that, nothing.
Did you enjoy using the product? Yes, it changed the way I ride a CX bike.
Would you consider buying the product? Yes.
Would you recommend the product to a friend? Yes.
About the tester
I usually ride: It varies as to the season. My best bike is: The one I'm on at the time
I've been riding for: Over 20 years I ride: Most days I would class myself as: Experienced
I regularly do the following types of riding: road racing, cyclo cross, general fitness riding, fixed/singlespeed, mtb, Fun