Support road.cc

Like this site? Help us to make it better.

review

Crud Roadracer Mk2 mudguards

9
£29.99

VERDICT:

9
10
Excellent, easy-fit and good-value mudguard option for road bikes with tight clearance
Weight: 
205g
Contact: 
www.madison.co.uk

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

Crud Products used to be better-known in the off-road world, but in the last few years their Roadracer guards have become wildly popular on road bikes too. They're designed for road bikes that won't take conventional mudguards, either because of tight clearances between frame and wheel, or because there are no mudguard eyes on the frame - and usually both.

Call me old-fashioned, but I just don’t understand how anyone can ride a bike without mudguards through the British winter. With no mudguards, you get your legs and backside covered in grime, you liberally spray anyone riding behind, and you leave dirty patches on the seats in cafes that later put up ‘no cyclists’ signs.

Until recently, one of the arguments against mudguards was ‘they don’t fit on my racing bike’. Another was ‘mudguards spoil the looks of my bike’ (to which a response might be: that’ll be the bike covered in shite then.) But thanks to Crud Roadracers neither of these arguments stand up any more.

As long as you’ve got 4mm between the top of your tyre and the inside of your brake calliper, the Roadracers will slide in. And you don’t need mudguard eyes: Roadracers attach to the frame with re-usable cable ties and some natty little brackets held on with rubber bands.

Rubber bands?

Yes indeed. That’s all you need to fix the Roadracers because they’re incredibly light, around 150 to 205g the pair, depending on your choice of ‘tips and tails’. More on that later. The weight is saved because Roadracers don’t have the four stiff metal stays used on conventional mudguards to keep the guards from touching the wheel or tyre. Instead, the Roadracers have just two flexible plastic stays and are designed to ‘float’ above the tyre, with some little strips of soft brushing on the inside of the stay-clip to rub very gently on the rims and keep the guards central.

Once you’ve got your head round this concept, it’s a revelation. Yes, the brushes do touch your rims, but the friction is absolutely minimal (Crud say it’s too small to be measured), and with the bike in a stand in the road.cc test lab, the wheels spun in the frame with Roadracers attached just as freely as without.

The original Roadracers were launched a couple of years ago, and the Mk2s feature several improvements: they’re slightly stronger, and you get a wider choice of ‘tips’ and ‘tails’ to attach to each end of the main section of mudguard.

Options include a long or short tip for the front guard; you decide how far you want it to project beyond the front brake. At the rear you can fix a short or long tail; the latter as good as a full-length mud-flap on conventional guards.

Between the back wheel and the seat tube you can fit another long section, sculpted into a deep concave shape at the end to protect your chainwheels and front mech. On one of our our test bikes we couldn’t use this because of the cable line to the front mech, but it’s well worth taking the time to install it if you can because it really does help keep your front mech and chainrings cleaner.

If you want a really minimal look you don’t *have* to fit the tips and tails at all (and on frames with very tight clearance, you can’t), but we think they make a neater job of it.

Out in the puddles

Ok, so they look good, but do they work? Yes. for our first go-round with Roadracers we fitted them to a test bike that scooted around the wet and muddy Cotswold lanes on a February weekend on a 100km audax. Without doubt they were as good as conventional mudguards in keeping the rider (and those behind) as clean and dry as a set of conventional guards.

It has to be said, because of the close clearance, when ridden on really muddy roads, there’s a bit of scraping between the Roadracers and the tyre - until the mud falls off - so in that respect they’re more spray-guards than mud-guards, but so much better than nothing at all.

Since that ride, a couple of years ago now, various members of the road.cc crew have clocked up thousands of winter miles on Roadracer-equipped bikes. One of us keeps a set on a bike year-round and only rides without them if the forecast is for clear skies for the next couple of days.

I’ve been a fan of Crud stuff since the 1990s, and have used various versions on mountain bikes over the years - including an early version of a rear Crudguard (with two upright aluminium stays and flexible rubber mountings) that still occasionally sees the light of day on a heavy old hardtail. The Roadracers continue this legacy.

Fixings

Fixing the Roadracers can be a bit fiddly first time out, but straightforward if you read the instructions - and no worse than fitting a conventional set of mudguards. No tools are required; you just use little plastic nuts and bolts that need finger-tightening only. Here in the road.cc lab we fitted our test set of Roadracers on a bike in well under an hour. For more help, the Crud website features some handy advice on fixing and adjusting Roadracers, and includes a great ‘tips & tricks’ video.

They’re fairly easy to knock out of alignment, but if you do hear them rubbing as you ride along, it can usually be fixed by just pulling the frame attachment round the stay.

Some folks have complained that Roadracers are a bit fragile, and there’s no denying they need gentler handling than chromoplastic guards with metal stays. They are intended to break if something gets stuck in your wheel, which means it’s not hard to break them by accident, for example by absent-mindedly popping your bike up on its rear wheel to wheel it through a gap. So don’t do that.

Crud Roadracers cost £29.99 in bike shops, and you can find them for a few quid less on the major on-line stores. That’s a similar price, or only a bit more, than a good set of conventional mudguards, and well worth the money for keeping diesel-and-manure-flavoured road-spray off your racing bike, off your cycling clothes, and off your poor old club-mates trying to sit on your wheel.

Verdict

Excellent, easy-fit and good-value option for road bikes with tight clearance. Fit a pair of these, and you'll keep the worse of the muck off all winter long.

road.cc test report

Make and model: Crud Roadracer Mk2 mudguards

Size tested: n/a

Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

The Crud website says 'Traditional mudguard construction dictates a sturdy design, with bolted fixing at the brake bridges... This principle has remained unchanged for a century or more. The Crud Roadracer turns orthodox mudguard design on its head...'

And once you've got your own head round this concept, it's a revelation.

Rate the product for quality of construction:
 
9/10
Rate the product for performance:
 
8/10
Rate the product for durability:
 
8/10
Rate the product for weight, if applicable:
 
9/10
Rate the product for value:
 
9/10

Did you enjoy using the product? Yes.

Would you consider buying the product? Yes.

Would you recommend the product to a friend? Yes.

Overall rating: 9/10

About the tester

Age: 50  Height: 5ft 10 / 178cm  Weight: 11 stone / 70kg

I usually ride: an old Marin Alp   My best bike is: an old Giant Cadex

I've been riding for: Over 20 years  I ride: A few times a week  I would class myself as: Experienced

I regularly do the following types of riding: touring, club rides, sportives, mtb,

 

Add new comment

34 comments

Avatar
Mombee | 10 years ago
0 likes

If you're running winter tyres, then you may well struggle to fit these Crud guards. I have a Cannondale R700, so not a tight racing whippet by many standards, and have swapped my normal Rubino Pros for 25mm Gatorskins because of the amount of standing water and cack on the roads at the moment. Those tyres aren't a noticeable increase in overall size, but it makes it impossible to fit the Crud Road Racer guards… and I tried a lot of fiddling and fettling to no avail.
The only practical way that I could find to fit the rear guard was to put it OVER the brake calliper… but that's a fudge too far, so they'll be going back I'm afraid.
See… http://mombee.com/gear/wheels/crud-road-racer-review/

Avatar
Mombee replied to Mombee | 10 years ago
0 likes

Update, later on the 28th Feb, I had a reply from the team at Crud Products… it’s good to get the response, even if it doesn’t help my predicament:

Hi Pete
Bad luck with the fit. Some manufacturers see fit to have less than 4mm between frame and tyre. This is a ludicrously small gap, and even the RR’s (which take up just 1.5mm) can’t be successfully squeezed in there.
Fortunately, with 25mm tyres 95% of the bikes out there have more than 4mm, enabling fitment.
Sorry we can’t help you more
Best Regards
Mr CRUD

Avatar
60136 Alcazar | 9 years ago
0 likes

Had a set of these for five winters. Started with Mk 1's then bought another set when the Mk 2's came out so I am well equipped with spares. Only lost the bottom bit of the front guard which I replaced with the back piece of the Mk 1. Never had an issue in fitting; took me about 15 minutes when I put them on again last week. Seem to be made for my Giant TCR; no tyre rubs or rattles and a dry backside and feet on wet roads.

Avatar
nortonpdj | 8 years ago
0 likes

Despite the fiddly fitting (watch the video mentioned in the review - I found it really helpful) these things really work. Now let's see how long they last....

Pages

Latest Comments