Time will tell if it is a better union between cog and hub but it certainly looks to be, both on paper and in the flesh. There is no apparent taper on the spline interface so play could perhaps develop but the tolerance is very tight and the quality of materials is very high and that should be enough for it be trouble free for a long, long time. The cogs are available in sizes 14t-20t in both 3/32" and 1/8" widths. A standard English 1.29 x 24 tpi threaded lock ring is needed to keep the cog in place. Once mounted to the White Industries ENO hub there is no play and no slip, just a solid connection and direct power delivery that you can depend on, ideal for those who like to skid or punish their knees with resistance braking.
Splined fixed rear cog for ENO hub. Solid cog with zero movement giving reliable power delivery to your back wheel. Ideal for those who skid.
road.cc test report
Make and model: White Industries ENO sprocket
Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
To mate perfectly with the splines on the ENO hub.
Tell us some more about the technical aspects of the product?
8620 case hardened steel, 78grams, available in sizes 14t-20t in both 3/32" and 1/8" widths.
Rate the product for quality of construction:
10/10
Rate the product for performance:
10/10
Rate the product for durability:
9/10
Potentially a very long time but without a taper on the spline, play could develop between the cog and the hub but the tolerances are high so this might never happen.
Rate the product for weight, if applicable:
9/10
You can get alloy cogs if you want to compromise durability and save a few grams.
Rate the product for value:
7/10
This will last a long time but if you are changing terrain and want to experiment with different ratios it is going to get expensive.
Tell us how the product performed overall when used for its designed purpose
Solid, dependable performer.
Tell us what you particularly liked about the product
Shiny.
Did you enjoy using the product? yes
Would you consider buying the product? yes, if I have an ENO or splined hub
Would you recommend the product to a friend? yes for the same reason as above.
Anything further to say about the product in conclusion?
Works perfectly with the White Industries ENO hub
Age: 36 Height: 78 Weight: 178
I usually ride: Sparton, brakeless fixed My best bike is:
I've been riding for: Over 20 years I ride: Every day I would class myself as: Expert
I regularly do the following types of riding: commuting, sportives, fixed/singlespeed, mtb,
What a shame that the Evening Standard's coverage leads with 'lycra lout'. I'd lay a bet that a high proportion of the red-light jumpers were not...
Confusingly there seem to be two Millicent roads which cross at approximately right angles, the one that is north-east to south-west is the one...
Indeed....
I presume that garda will be sacked shortly for showing up all of their colleagues?
Haha! Not quite, don't go giving me ideas now!
Your point being? That old lane (now closed off as is obvious in the link you posted) was built thirty five years ago or more. On the other side...
"Although other neighbours were outside, nobody else had thought to alert her mum and siblings because there was no car on the drive so they didn’t...
"Aldi apologised for the blocked bike racks and said "we have spoken with the store to make sure that the cycle bays are clear for use at all times...
Interesting..... but perhaps I'll wait for the LIdl or Aldi copy and save a couple of hundred quid.....
The change in running shoes has come in the last five years or so, the TdF analysis goes until 2010, so before, as I pointed out above....