Surly Braker hanger  £7.99

7/10

Elegant, well-made replacement cable guide for cross and touring bikes, perhaps a tad pricey

Weight 6g   Contact www.ison-distribution.co.uk

by Shaun Audane   December 13, 2009  

Surly Braker Hanger

Complete with discrete Surly logo, the Braker is basically a stainless steel paperclip on steroids but the perfect replacement for chrome plated seat/cable hanger bolts commonly found on cyclo cross and touring bikes. It’s also a really elegant solution to the problem of running cantilevers on frames built for linear pulls. That said anyone with rudimentary metal working skills could fabricate a replica in minutes using scraps from the spares bin.

Performing the transplant on my mtb-based cross hack complete with its ugly but arguably competent cable tied reflector bracket bodge took 15 minutes, because I needed to release the inner wires. Simply extract the binder bolt and position the clip end between the ears. Replace and tighten as usual. Feed the cable into the barrel adjuster before connecting and adjusting the brakes-job done. Despite some initial concerns, there’s adequate length to accommodate most framesets (between 41 and 60cm at least) and it doesn’t seem to mind nestling between old-fashioned binder bolts or modern collars.

The barrel adjuster on our test sample felt arthritic, benefiting from a drop of oil on the threads- something I’d do as matter of course on winter/cross bikes without guards. Not only does it add the finishing touch to a classic steel frame but creeping just over 6g on the scales it will save a few grams over cheaper models/ back yard specials. Feeling really tight, I might not pop it on a hack but frankly it does the job, looks great and won’t corrode.

Verdict

Elegant, well-made replacement cable guide for cross and touring bikes

road.cc test report

Make and model: Surly Braker hanger

Size tested: n/a

Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

In a nutshell, Surly's braker is an elegant stainless steel rear brake cable hanger designed primarily for cross and touring frames but could also come in handy for running a centre-pull on a winter fixed.

Tell us some more about the technical aspects of the product?

Stainless steel, 75mm long 6g

Rate the product for quality of construction:
 
7/10
Rate the product for performance:
 
7/10
Rate the product for durability:
 
7/10
Rate the product for weight, if applicable:
 
9/10
Rate the product for comfort, if applicable:
 
7/10
Rate the product for value:
 
6/10

Tell us how the product performed overall when used for its designed purpose

Surly's braker provides a lightweight elegant solution to the traditional chrome cable hanger but works particularly well marrying cantilevers to bikes built for linear pull (V brakes).

Tell us what you particularly liked about the product

Elegant and corrosion resistant.

Tell us what you particularly disliked about the product

Nothing but could be be considered overpriced by some.

Did you enjoy using the product? Yes

Would you consider buying the product? Yes

Would you recommend the product to a friend? Yes

Overall rating: 7/10

About the tester

Age: 36  Height: 1m 81  Weight: 70 kilos

I usually ride: Rough Stuff Tourer Based around 4130 Univega mtb Frameset  My best bike is: 1955 Holdsworth Road Path and several others including cross & traditional road

I've been riding for: Over 20 years  I ride: Most days  I would class myself as: Experienced

I regularly do the following types of riding: cyclo cross, commuting, touring, fixed/singlespeed, mtb,

4 user comments

LatestNewestBest ratedAll

The point about these is that they allow you to adjust cantilver brakes and to slack them off to take the wheel out, which static hangers don't (unless the brakes are well off the rims anyway). For that reason I fitted one of these to my Van Nicholas Amazon in place of the supplied hanger, which had no adjustment - I had to source it from the USA at the time. Its very nicely made and I defy anyone to 'fabricate a replica in minutes using scraps from the spares bin'.

posted by amazon22 [136 posts]
15th December 2009 - 14:10

like this
Like (0)

you don't want to challenge shaun to anything like that. This is a man who makes his own waxoyl, for goodness' sake

Dave Atkinson's picture

posted by Dave Atkinson [6637 posts]
15th December 2009 - 14:15

like this
Like (0)

But can he laser etch an 'S' into a stainless steel threaded barrel for less than £7.99?

posted by amazon22 [136 posts]
15th December 2009 - 16:19

like this
Like (0)

heh. he'll die trying i'm sure Big Grin

good point about the adjustment though. duly noted.

Dave Atkinson's picture

posted by Dave Atkinson [6637 posts]
15th December 2009 - 16:43

like this
Like (0)

road.cc reviews

Latest reviews

7/10
£44.99
November 11, 2013
9/10
£6000.00
November 10, 2013
3/10
£18.50
November 10, 2013
7/10
£16.00
November 9, 2013
8/10
£39.99
November 8, 2013
7/10
£52.00
November 8, 2013
8/10
£10.00
November 7, 2013
9/10
£799.00
November 7, 2013
7/10
£30.00
November 6, 2013
7/10
£2494.95
November 6, 2013
8/10
£25.00
November 5, 2013
8/10
£85.00
November 4, 2013
7/10
£15.00
November 4, 2013
8/10
£620.00
November 3, 2013
8/10
£50.00
November 3, 2013
8/10
£29.99
November 2, 2013
8/10
£110.00
November 1, 2013
8/10
£31.94
November 1, 2013
9/10
£13.00
October 31, 2013
8/10
£1200.00
October 30, 2013
6/10
£179.99
October 29, 2013
6/10
£49.99
October 28, 2013
8/10
£49.99
October 28, 2013
9/10
£7100.00
October 27, 2013
7/10
£12.99
October 27, 2013
7/10
£10.99
October 26, 2013
9/10
£16.99
October 25, 2013
8/10
£149.99
October 25, 2013
 
1