Support road.cc

Like this site? Help us to make it better.

Video: Graeme Obree unveils new fairing for Beastie world record attempt bike

Better aerodynamics puts record in sight, but makes take-off tricky

Graeme Obree has made dramatic changes to the Beastie supine recumbent that he plans to use in September for a crack at the human-powered land speed record, with a new fairing to make the bike even more aerodynamic.

In testing back in November, Obree realised that the previous two-piece shell was not as slippery as it could be, and went back to the drawing board, according to Leo Kent’s latest update on Humans Invent.

Smooth curves

Obree said: “The front section is rounded, then it widens out and widens out and then comes back in, in a very smooth curve and narrows down to the back end…the most important part in terms of dividing the air and then pulling the air back in again with the least amount of energy is to have a laminar (non-turbulent) flow over the sides of it.”


Image: Rick @ Cyclesportphotos.com

The biggest remaining problems with the Beastie are geting it started and seeing where you’re going. The bike needs a push start because there is no way for Obree to support himself at a standstill, but the new shape is so narrow and slippery that it’s hard for his helpers to get a grip.

“I wanted to go at a great speed right away but the guys couldn’t launch me,” said Obree. “Back when I tested it at Machrihanish airport, I only needed one person to launch it so I assumed it wasn’t that hard to keep me upright and push me in a straight line but because it’s now all slippery and fish-shaped it’s hard for them.”


Image: Rick @ Cyclesportphotos.com

The tests at Machrihanish resulted in Obree cutting a larger hole in the the fairing so he could see where he was going, but if the road surface isn’t perfectly smooth, vision is still a challenge.

“The rattling goes right into your head because you’re so close to the ground,” he said.

Visibility

In the most recent tests at Prestwick Airport, Obree didn’t get anywhere near the speed he will need to hit when he goes for the record in Nevada. Because he couldn’t see very far ahead, it was hard to gauge the remaining runway.


Image: Rick @ Cyclesportphotos.com

“When you are 2ft 6in off the ground you can’t see how much runway you’ve used so I never actually got to my max speed. Also, you’re over geared because it is really geared to be doing 80 or 90mph.”

83mph

Nevertheless, one record that looks to be within easy reach is Jason Queally’s British mark of 63mph. Sam Whittingham’s 83mph record will be rather harder to crack.


Image: Rick @ Cyclesportphotos.com

“To go at that speed, and Whittingham is no slouch as a cyclist either, you’re thinking, I have to respect this record, it’s not going to be easy to break. I hope I can but I haven’t gone at any great speeds yet, so really you know as much as I know.”

Graeme Obree quotes courtesy of Human Invent, which also kindly supplied the pictures taken by Leo Kent.

Here's the new Beastie in action

John has been writing about bikes and cycling for over 30 years since discovering that people were mug enough to pay him for it rather than expecting him to do an honest day's work.

He was heavily involved in the mountain bike boom of the late 1980s as a racer, team manager and race promoter, and that led to writing for Mountain Biking UK magazine shortly after its inception. He got the gig by phoning up the editor and telling him the magazine was rubbish and he could do better. Rather than telling him to get lost, MBUK editor Tym Manley called John’s bluff and the rest is history.

Since then he has worked on MTB Pro magazine and was editor of Maximum Mountain Bike and Australian Mountain Bike magazines, before switching to the web in 2000 to work for CyclingNews.com. Along with road.cc founder Tony Farrelly, John was on the launch team for BikeRadar.com and subsequently became editor in chief of Future Publishing’s group of cycling magazines and websites, including Cycling Plus, MBUK, What Mountain Bike and Procycling.

John has also written for Cyclist magazine, edited the BikeMagic website and was founding editor of TotalWomensCycling.com before handing over to someone far more representative of the site's main audience.

He joined road.cc in 2013. He lives in Cambridge where the lack of hills is more than made up for by the headwinds.

Add new comment

11 comments

Avatar
Chris S | 10 years ago
0 likes

Looks like he has tabs to fit a closing fairing over his back(side) on the real runs, but in Nevada he'd be fried! The other thing about a laminar boundary-layer, pseudo aerofoil is that it can be unstable where it transits (inevitably) to a turbulent boundary layer somewhere into the rear taper, which will make it a pig to keep straight unless a 'trip-wire' is fitted to control the transition each side.

Avatar
TeamCC | 10 years ago
0 likes

Hope he makes it, great looking bicycle... well I am assuming there is a bicycle in there! Capital Cycles

Avatar
Mhughes2k | 10 years ago
0 likes

Is it just me or does it look a bit like Eve from WALL-E from the front?

Avatar
mrfree | 10 years ago
0 likes

no track stands on this bad boy then

Avatar
WolfieSmith | 10 years ago
0 likes

Oh come on Graham. You're fooling nobody. That's just a Bianchi bike box surely?  4

Avatar
PJ McNally | 10 years ago
0 likes

Is it a supine recumbent? He looks to be prone to me.

Avatar
Some Fella | 10 years ago
0 likes

I love the fact that those people just casually standing around are wearing hi viz in an effort, i suspect, to stay super safe but the fella charging down the runway at great speed and at great personal danger is wearing a t shirt and shorts.
Its Elf and safety gone mad innit?

Avatar
ir_bandito | 10 years ago
0 likes

would a gps help him see how far he's got til the end of the runway?

fold out runners would be useful if he doesn't want to crash it, but i guess its extra weight

Avatar
andyp | 10 years ago
0 likes

what happens at the other end? a gert big pile of cushions? Or a slips cordon of helpers ready to 'catch'.
Love it. Good old Graeme  1

Avatar
STATO | 10 years ago
0 likes

He needs to fit some fold out (or removable) handles like on a bob-sled!

Avatar
shay cycles replied to STATO | 10 years ago
0 likes

Or a sling type device to hook around the back, offering handles/grips slung up around the sides nearer to the front. The sling would simply dropping away once the machine is moving faster than the people pushing it.

Latest Comments