Lightweight Rennbugel 168g carbon handlebar released

German wheel-meisters produce carbon fibre handlebar

by David Arthur @davearthur   June 13, 2013  

German company Lightweight have today launched their first carbon fibre handlebar, the Rennbugel. A full carbon construction lends the bar a 168g weight and it's available in three sizes.

Lightweight is better known for making some of the lightest carbon fibre wheels in the world, with the likes of the Obermayer and Ventoux. And who can forget their£704 sub-120g rear derailleur. It's clear lightness and performance at whatever cost is the driving force behind the company.

Back to the handlebars. They're made form hi-modulus carbon fibre with a uni-directional matte black finish. They will be offered in three widths (40,42 and 44cm measured centre to centre) with a 31.8mm clamp size. The drop measures 136mm and the reach 79mm, with an ergonomic bend.

Those are very similar numbers to the Thomson Carbon Road bar I tested a little while ago. The Lightweight is 32g lighter size for size compared to the Thomson though, it's worth pointing out.

The bar is finished in black with white logos and there's markers on the drops so you can easily line up the hoods on both sides. The three clamp areas have a roughened surface treatment to prevent slippage. We've not had confirmation of the UK price yet, as soon as we get that info we'll let you know. We're expecting them to be expensive though, and would imagine a price in excess of £200.

2 user comments

Oldest firstNewest firstBest rated

I'd buy one, but I don't like their font.

two wheels good; four wheels bad

posted by cat1commuter [1447 posts]
14th June 2013 - 17:08


Isn't the font designed to look lightweight? That's what I'd always assumed.

drmatthewhardy's picture

posted by drmatthewhardy [584 posts]
16th June 2013 - 10:28