We're not done with Core Bike 2013, so here's another batch of new products from the show. There's a bit of something from Castelli, Thomson, Raceware, 3T and PDW. If you missed our earlier roundups you can read them here and here.
Castelli have a whole bunch of new clothing on the way. This (below) is the Climber’s Jersey (£80) and it’s incredibly light at just 91g.
It’s made from various fabrics but the main one is a 3D weave, a lot like many base layer fabrics, so that it doesn’t sit flat on your skin. The ridges allow air to circulate for improved drying, like you’ll find on many base layer fabrics. The idea here is that you can wear this without a base layer, and it’ll work to keep you dry in the same way.
The Climber’s Jersey is intended as a race piece so it’s a close fit. The Garmin-Sharp team have used it a lot in races and Castelli reckon the fact that the fabrics shift moisture so well and dry fast means that it performs well in wet conditions too.
The multi-panel Inferno shorts (£130) are intended to go with the Climber’s Jersey so, again, they’re very lightweight with plenty of mesh, although it’s not see-through – you’ve got to keep things decent. You get Castelli’s excellent two-piece Progetto X2 seatpad in these.
Castelli’s Pocket Liner jacket is a really interesting product that has been in development for an age – the Cervélo Test Team were involved in some of the original work.
It’s a waterproof made from eVent breathable fabric, and it has a zillion features. Most noticeable among them is the pleating that you get on the back and on the elbows to allow you to get a close fit with plenty of stretch.
You can close the front via Velcro tabs or you can use the zip, a storm flap keeps the draughts out or you can fold it back to let some air in via a mesh panel that runs alongside the zip. You get vents on the sides, Velcro closures on the sleeves and everything has been well thoughout. Unfortunately, Castelli reckon that it takes 4 1/2hrs to make each Pocket Liner jacket and that bumps the price up to a mighty £300. As an alternative, the Muur jacket is made from the same fabric but without all of the high-tech details. That one is £200.
This Elemento 7x (Air) jacket will be coming up in the Castelli range next winter, although it won’t be in this taupe colour, it’ll be in black and red, maybe blue.
As you can see, there’s more pleating here. The fleece-lined Thermoflex fabric uses a membrane that’s not breathable but all that stitching means there are plenty of holes for air to flow in and out. Again, there’s a lot of labour involved in this and that means the price will be £275. There will be a women’s version too.
We’ve told you about Raceware’s Garmin mounts before but they’ve now extended the range and got a major new UK distributor in Saddleback (the products aren’t on the Saddleback site yet but they will be soon). The Garmin Edge mount (£35) is available in various lengths and a whole load of different colours, all 3D printed.
There’s a time trial version (pictured), so you can mount your computer between your handlebar extensions…
…and there’s an adaptor so you can fit a Garmin Edge 705 to the mount.
Raceware have also been busy developing GoPro mounts, Zipp disc valve covers… all sorts. It’ll all be up on the Saddleback site soon.
This is the new Dios Thronous saddle (£35) from Portland Design Works (PDW) – Dios Thronous meaning ‘throne of the gods’! PDW wanted a waterproof saddle so they’ve made this one from injection-moulded EVA foam – just give it a quick wipe after rain and you’re good to go. Plus, there’s no cover to scratch or tear.
This alloy Bird Cage bottle cage is new from PDW too. It costs £13-£15, depending on the finish.
These Full Metal Fenders (£60) are another new product from the US brand. They’re anodized aluminium and they’re for use with 700 x 23 tyres. They’re designed to fit road bikes that won’t easily take most mudguards, coming with hardware that’ll get around brake callipers and under forks, and you get mounts for use on bikes with no mudguard eyelets.
Finally from PDW, there’s the new Excalibur rear mudguard (£27) for road and city bikes. It’s aluminium and fixes to your seatpost via a quick release mount.
This is the new Ionic seatpost from 3T. The Italian brand has just revamped its seatpost range and all the posts are now divided into two families: the Ionic and the Stylus. Within each family, there are the usual three 3T levels: Ltd, Team and Pro.
The Ionic uses 3T’s own DiffLock splined clamping mechanism which was on the Palladio post previously. 3T say, “DiffLock is a highly-accurate method of setting saddle angle requiring only lightweight clamping by side-mounted bolts. It is especially useful where the rider may wish to make adjustments to saddle setback – doing this does not change the critical saddle angle.”
Geddit? You can move your saddle fore/aft without messing up the angle. The Ionic is available in 27.2mm and 31.6mm diameters and with zero or 25mm setback.
This is 3T’s newest handlebar, the Tornova. It’s the result of feedback from the many professional cyclists who ride the Italian company’s parts, and combines a deep round bend of the Rotundo with a ergo tops of the Ergonova. The drop is 139mm and the reach is 83mm. It’ll be available in Pro (aluminium), Team and Ltd (carbon fibre) with prices ranging from £79.99 to £299.99.
Here’s the unique Integra Team stem, the aluminium, and therefore more affordable, version of the Carbon Ltd stem. Both have an optional Garmin Edge mount in the front. Without the mount a smooth cover gives the stem a very sleek, very aero look.
This is the rather lovely looking Token E4 carbon bottle cage. The design is intended to make getting your bottle in and out super-easy – but we’ve not used it yet so we can’t comment on how successful it is.
We’ve not used the single-pivot Token BR7230 Sharkfin brake callipers (£155) either, but they look pretty and they’re very lightweight at a claimed 211g per pair. They’re CNC machined aluminium with titanium hardware. Anodizing is well overdue a comeback, if you ask us. We’re fully behind it, although maybe not so much purple this time around.
Mat has worked for loads of bike magazines over the past 20 years, and been editor of 220 Triathlon and Cycling Plus. He's been road.cc technical editor for seven years, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. We send him off around the world to get all the news from launches and shows too. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a past winner of the Cycling Media Award for Specialist Online Writer.