Ritchey launch new Ritchey Logic steel road frame

Triple-butted frame is designed for long days in the saddle

by Mat Brett   November 8, 2012  

Ritchey Road Logic bike

Ritchey are offering a new Road Logic steel road bike frame for 2013, and here it is.

Tom Ritchey built his first road frame in his parents' garage way back in the 1970s. The 2013 Road Logic is said to carry many of the subtleties and details gleaned from Tom’s vast experience with steel frames.

He designed an all-new, heat-treated and triple-butted Ritchey Logic tubeset for the frame, featuring aggressively short-butted sections that have been optimized for TIG welding, designed to save weight and improve ride quality.

 

Ritchey’s proprietary forged and machined integrated head tube uses standard drop-in bearings and saves 80g over a standard head tube design, according to the manufacturer.

“The Road Logic is ideally suited for long, epic days in the saddle on roads that are not always paved, and still nimble and stiff enough to take the county line sprint at the end of the day,” say Ritchey.

The Road Logic is built in six sizes from 49cm to 59cm in classic Ritchey geometry. The 55cm version, for example, comes with a 525mm seat tube, 560mm effective top tube, 16cm head tube and 73.5° frame angles. There’s enough clearance to fit tyres up to 28c.

The Road Logic isn’t nearly as light as some of the feathery speed machines out there; that’s not the main point here. The 55cm version is 1,769g plus 345g for the matching fork. They come together, along with a Ritchey WCS headset, for £950.

Ritchey’s UK distributor, Paligap, reckon the first stock will arrive mid-December. Get more details from the website.

11 user comments

Oldest firstNewest firstBest rated

Looks lurvely. Always like Ritchey frames - quite fancied a breakaway for a while.

Long top tube on these, considering the 'all road' intended use. Be interesting to see a review at some point if Road.cc can get one in!

posted by step-hent [668 posts]
8th November 2012 - 13:31

like this
Like (20)

step-hent wrote:
Looks lurvely. Always like Ritchey frames - quite fancied a breakaway for a while.

Ditto, the problem tho is getting one as Paligap stopped bringing them into the country.

STATO's picture

posted by STATO [411 posts]
8th November 2012 - 13:39

like this
Like (24)

Proper nice.

posted by thereandbackagain [152 posts]
8th November 2012 - 15:21

like this
Like (17)

That is going on my (ever expanding) new frame wish list.

posted by othello [279 posts]
8th November 2012 - 15:43

like this
Like (19)

Nice and understated.

Velotastic !

Too many hills, but too little time.

badback's picture

posted by badback [266 posts]
8th November 2012 - 16:01

like this
Like (25)

Band-on front derailleur clamp, but what diameter? They can be a pain if they are not 32 or 35 mm. If the tubing is 28.6 mm, I'd prefer to see a brazed on bracket.

two wheels good; four wheels bad

posted by cat1commuter [1333 posts]
8th November 2012 - 17:21

like this
Like (26)

STATO wrote:
step-hent wrote:
Looks lurvely. Always like Ritchey frames - quite fancied a breakaway for a while.

Ditto, the problem tho is getting one as Paligap stopped bringing them into the country.

They actually don't make them any more. I have a BreakAway Ti/Carbon and it's an excellent frame - and it can go with me wherever I go! Bit of an expensive beast to trust to Ritchey's soft-sided case, but no problems so far. If my experience is anything to go by, this steel frame will be a great ride.

posted by TimC340 [31 posts]
8th November 2012 - 18:22

like this
Like (18)

I had a steel Breakaway that was a great bike - replaced it with a custom titanium CX with Breakaway-style couplings because it gives extra versatility - just need to put an extra pair of CX tyres in the case for twice the fun! I have a Ritchey P29er too - Tom knows how to design a great frame.

Make mine an Italian with Campagnolo on the side

posted by monty dog [360 posts]
8th November 2012 - 20:03

like this
Like (20)

TimC340 wrote:

They actually don't make them any more.

Yes but this is the first year they stopped, Paligap or whoever never brought the steel ones in to the country in the last 3 years at least. Ruddy annoying when importers dont even bother importing half the stock.

STATO's picture

posted by STATO [411 posts]
8th November 2012 - 22:27

like this
Like (20)

That really is a properly nice looking bike, I still remember Frischnecht troucing everyone on a P21(?) MTB. Lovely.

Currently going slower than I'd like...

posted by stealth [182 posts]
9th November 2012 - 16:22

like this
Like (27)

Frames are obviously made for all weights of people, couldn't they make the frame lighter if they specified for example a 12 stone (76Kg) weight limit? Or does it not work that way? Thinking

posted by kie7077 [448 posts]
9th November 2012 - 20:58

like this
Like (21)