Earlier this month we brought you news of the super-minimalist Ultralite pedal - now we have the full story behind the product. It's one of the lightest pedal and cleat systems in the world at just 112g, and sports a minimalist design and glass-reinforced nylon cleat that requires a unique clip-in approach.
We were sufficiently intrigued (we always like it when the small guys challenge conventional bicycle design) so we had a chat with founder Bill Emerson, to find out more about the pedals and the driving force behind their development.
Road.cc: What prompted the design of the pedals?
Bill Emerson: We at Ultralitesports are avid cyclists to the core with decades of riding and racing fun behind us and hopefully before us! From local hill climbs to the Tour of Ireland, the master's road worlds and most recently the Leadville 100 on mountain bikes, we have enjoyed the challenges of competition as well as just a ride with the gang.
Here in the High Rockies, with many of the climbs topping 11,000ft (3,350m) and our backyard Independence Pass at 12,100ft (3,700m) - Tour of Colorado climbed both sides on two days this year - we have appreciated the improvement in bike technology and use it daily. Is it an attempt for Neal and I, (the two older partners) to turn back the clock? Maybe, but we just enjoy the functionality of great, reliable equipment.
What made you choose this particular design of pedal? Was weight the main reason for the design?
We saw the pedal market as relatively stale and felt that a new approach combining the best aerospace materials as well as innovative design could create a pedal system with more adjustability for different strength/weight riders, lower rotational mass and better aerodynamics.
Combined with the new high-performance cycling shoes that are very lightweight and have stiff carbon soles, our pedals can take a pound off your feet compared to the best and lightest pedals on the market (don't forget to add in the cleats and screws when you think of pedal weight). This not only feels better, it is faster.
The pedal is extremely light due to its unique design. Is it possible to go lighter?
Whether you are a recreational rider, competitive triathlete, road racer or time triallist, lower rotational weight translates to better performance. We maximize the potential by having 112g pedals including pedals, cleats and Ti screws for the titanium model with the stainless about 40g heavier. My previous pedals, which I rode for almost 20 years, are considered one of the best and lightest. The Ti model is some 150g heavier and the other high end pedals are over 200g heavier including cleats and screws. It makes a difference that you feel, similar to the difference between a light running shoe and regular walking shoes.
Some readers have observed that they offer less float than other pedals. Will it be possible to design a cleat with more float?
The cleats allow superb transfer of power to the pedal. Other cleats have soft stops at the end of the float travel – continue pressing past the stop and you’re out of the pedal. That is not the case with our pedals. Even the float cleat has a hard stop at the end of float travel. This ensures all power can be put into the pedal and not limited because you don’t want to click out of the pedal.
Does it take long to adjust to the different technique required to clip in?
The motion to get in and out is different. Remember when swinging your heel way out to the side felt odd? It takes a little practice and attention for the first couple of rides, then it feels natural. You can start with a light spring, then add spring shims or replace it with a stronger spring if needed. The motion is subtle and does not require great effort. Finesse. Campy, Shimano and SRAM shifters take a little thought to switch between; this is similar.
Is it possible to easily unclip in a crash?
I don't know of any pedal designed for release in the event of a crash. Crashing releases enormous forces in many directions and these forces should do their work. Will they both release every time? Probably not. We're looking for testers! Kidding! Maybe a crash test dummy on an old bike let go behind a good old 1950s Colorado pickup is a good idea! Hmm, could be a YouTube hit.
As one of our friends and testers has said (two local testers pictured above), it's hard to describe the feeling. Smooth, light feet... it's really something else. If anyone is sceptical, that's fine and normal. We, and many others, ride them every day and we're never going back.
Will they be available in the UK?
We are working out distribution to the UK. Anyone interested should email us through www.ultralitesports.com and we can help out.
David has worked on the road.cc tech team since July 2012. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds.