Above Category Bike Shop's Bar Fly computer mount now available in UK

Designed to be the Ideal perch for your Garmin Edge

by VecchioJo   June 15, 2012  

The Bar Fly is a piece of Delrin plastic designed to clamp directly to your handlebar and put your Garmin computer in front and in-line with your stem, to offer more adjustability and better visibility than the standard out-the-box zip-ties or rubber-bands fixing options.

The Bar Fly was born in the ‘Above Category’ bike shop in Marin County, California, where it was designed by general manager, Woody Tate who wasn’t impressed with his Garmin’s factory mount - "Out of the box, using a stock mount, the Garmin 500 is mired with poor visibility, is unsafe, and leaves your bike with a tarnished aesthetic. After my first experience with the Garmin 500 I went to work designing The Bar Fly.”

The Barfly puts your Garmin in front of your stem a bit like an SRM unit, and the angle of the unit is adjustable for better visibility, so great for those with short stems, those set at an upright angle, or those that don’t like the way it clutters the bike.

The Bar Fly will hold any Edge computer with the twist back, the Garmin Edge 200, 500 or 800 then, and has the quarter-turn pattern molded directly into the mount itself so messy bands, clamps and zip ties are unnecessary. It will clamp to any 31.8mm bar, is “ethically constructed” in the United States and weighs 19g.

Prestige Cycles in Hove have just picked up exclusive distribution of the Bar Fly in the UK where they’re, you guessed it, flying out the shop at £40 a pop.


17 user comments

Oldest firstNewest firstBest rated

I was all "where can I get one" right up to the point I read "£40".

Way way to expensive for a bit of plastic.

It may be ethically produced but it is not ethically priced!

I will stick with my rubber bands.

posted by scaramanga [34 posts]
15th June 2012 - 15:29


£40 is a bit crazy, Ive seen plenty of examples of excellent home made ones around the web, time to get the dremel out.

posted by lolol [167 posts]
15th June 2012 - 16:02


Nothing wrong with elastic bands, in my opinion. Don't understand why something hanging off the handlebar is any less cluttering than something attached to the stem. And you cannot 'ethically' source (unnecessary) stuff from the States; flown in perhaps!

posted by malmesburyclarioncc [26 posts]
15th June 2012 - 16:31


I've got one. It works great, having the unit further forward makes it a lot easier to read. It is clearly overpriced, but I didn't get any Olympic tickets so I had some spare cash to burn.

btw Prestige Cycles were great to deal with

posted by bikewithnoname [64 posts]
15th June 2012 - 16:37


What about if you have tribars/aerobars fitted? The barfly won't work then (certainly not with bars bolted on to normal road bars). Is there anything similar that can mount across the bars?

posted by Paul J [775 posts]
15th June 2012 - 16:50


malmesburyclarioncc wrote:
…Don't understand why something hanging off the handlebar is any less cluttering than something attached to the stem. And you cannot 'ethically' source (unnecessary) stuff from the States; flown in perhaps!

Surely the last picture demonstrates the less cluttering aspect pretty obviously, and to be fair the story says "ethically constructed in the US" not "ethically sourced" think it's perfectly possible to ethically construct something in the US.

Got to say though that the price is a bit salty considering they retail for $39.99 in the US - about £25.50, and presumably bought in at trade price. Even £25.50 seems a lot when you consider that something like a Minoura Space Bar costs about £15 tops.

Tony Farrelly's picture

posted by Tony Farrelly [4201 posts]
15th June 2012 - 17:15


Quarq (SRAM) makes an aftermarket mount as well. Some have reviewed it better than the Barfly. http://nyvelocity.com/content/equipment/2012/garmin-mounts-barfly-vs-quarq

pedalpowerDC's picture

posted by pedalpowerDC [299 posts]
15th June 2012 - 17:16


The quarq one looks better, except for the quarq branded bit. hopefully this will be the start of a wide range of these things becoming available - that would bring the prices down too.

There was a guy in the UK selling printed garmin mounts - racewheelsdirect.co.uk - but he seems to be sold out and has been for a while.

posted by step-hent [714 posts]
15th June 2012 - 17:26


I want something for my Polar mount but sorry £40 is a joke, £25 is to be honest IMHO. I followed the links to homemade ones and have some ideas now. I'll keep you posted.

bikeandy61's picture

posted by bikeandy61 [475 posts]
16th June 2012 - 9:54

bikeandy61's picture

posted by bikeandy61 [475 posts]
16th June 2012 - 10:03


thought garmin charging £10 for a edge mounts was expensive...

also think the edge is better protected if you place it ontop of your stem with the std fitting kit.

posted by rootes [46 posts]
16th June 2012 - 11:08


simply ridiculous price. What planet do they imagine we are on...

cheers m'dears

2011 Rose Pro-SL 3000 Road
2006 Lemond Alpe d'Huez Broken
1997 Marin Sausaulito Urban bimbling/shopper
1980 Orbea project

daviddb's picture

posted by daviddb [129 posts]
16th June 2012 - 17:38


I've got one of these (or rather, a version without the branding) - but it's not an elegant solution, and road vibration can cause the computer to rotate forward whilst riding. A bit of skateboard grip tape under the mount helps, but doesn't totally solve the problem.

As has been pointed out, though, £40 is too much to pay for something better. I'll be waiting a while until a few more options come out.

posted by step-hent [714 posts]
16th June 2012 - 17:48


It's not made by Bang & Olufson is it ?


posted by sonyjim [46 posts]
16th June 2012 - 19:10


This is a great idea and one I would have grabbed for my garmin but £40! Really?


posted by Super Domestique [1686 posts]
17th June 2012 - 11:14


I bought my Bar Fly at http://www.fabulous-bikeparts.de/Garmin-Bar-Fly_1 for 30€

posted by Schoscho [2 posts]
19th June 2012 - 12:49


Schoscho wrote:
I bought my Bar Fly at http://www.fabulous-bikeparts.de/Garmin-Bar-Fly_1 for 30€

Plus €10 for shipping to the UK. A little cheaper, but not much...

posted by step-hent [714 posts]
19th June 2012 - 13:13