Home
Red design will be available separately aftermarket

The chain spotter – otherwise known as a chain catcher – that SRAM introduced as part of their new top-end Red groupset earlier in the year will soon be available to buy on its own aftermarket.

The chain spotter is integrated with SRAM’s new Red Yaw front mech, but now you’ll be able to get it separately to prevent your chain from coming off, wasting time and potentially damaging your frame.

The chain spotter is easy to install, adjust and remove without affecting the tuning of your front mech. The 2.5mm hex mounting screw fits in the 4mm hollow threaded mounting bolt of SRAM Red-2012, SRAM Red, SRAM Force, SRAM Rival and SRAM Apex braze-on front mechs (as in the picture above). If you don’t have a compatible front mech, you can fit the SRAM chain spotter with a separate clamp band.

The chain spotter will be available from 1 June at £27.99. The clamp band will come in 34.9mm and 31.8mm diameters at £29.99.

Mat has worked for loads of bike magazines over the past 20 years, and been editor of 220 Triathlon and Cycling Plus. He's been road.cc technical editor for seven years, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. We send him off around the world to get all the news from launches and shows too. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a past winner of the Cycling Media Award for Specialist Online Writer.

3 comments

Avatar
meehaja [24 posts] 4 years ago
0 likes

Is the clamp band a separate item? If so, for £57.98 it seems like an expensive bit of bent metal...

Avatar
nowasps [453 posts] 4 years ago
0 likes

Surely these should be part of the front mech as standard? If the chain comes off, the the equipment isn't up to the task.

Avatar
pedalpowerDC [335 posts] 4 years ago
0 likes

get a K-Edge!