Support road.cc

Like this site? Help us to make it better.

TECH NEWS

English Cycles in Oregon develop in-house aero hubs

British component porn produced a long way from home

British engineer Rob English who has been based in Oregon, USA for five years and has so far based his reputation on building frames has branched out into component making and launched his own hubs.

An avid time-triallist, English developed the front hub for his own use over two years, in particular to be as narrow as possible to fit within standard 100mm forks for an aerodynamic advantage with aerofoil-section end caps to smooth the air between fork and hub flanges.

According to English, "With a deep section rim the spoke bracing angle is similar to a shallow rim on a regular hub, giving a wheel with good lateral stiffness, but a small frontal area for aerodynamic efficiency." The hubs are machined to English's design by C4 in California.

English recommends Enve 6.7 carbon tubular rims which have 60mm profiles at the front and 70mm at the rear.

The complete wheels are stiff and claimed to be strong enough even for road-racing as well as time-trials and triathlon. English furthermore claims that the rims despite being relatively deep are also relatively unaffected by cross winds in his experience. 

The front hub weighs 120 grams and costs US$225 and the rear for either Shimano/SRAM or Campagnolo 182g / $450.

Complete wheels with the Enve rims and Sapim CX straight-pull spokes weigh 1,435 grams and sell for US$2,600 or £1,950.

The titanium-skewered quick releases with carbon and aluminium levers weigh 44g /pair and cost $95 alone or come included for no extra charge with the complete wheels. 

Details: englishcycles.com

Add new comment

3 comments

Avatar
dandan | 12 years ago
0 likes

The same skewers can also be bought from Planet X for £30

http://www.planet-x-bikes.co.uk/i/q/WSPXTISTQR/planet_x_ti_stick_quick_r...

Avatar
Paul M | 12 years ago
0 likes

Bit confused by the article subtitle!

Avatar
nick_rearden replied to Paul M | 12 years ago
0 likes
Paul M wrote:

Bit confused by the article subtitle!

Rob English is a Brit. The components are designed by him in Oregon and machined in California. We're claiming him for team GB; he seems quite happy with that  1

Latest Comments