Support road.cc

Like this site? Help us to make it better.

TECH NEWS

First ride: Campagnolo EPS electronic shifting

We head to Italy to try Campag’s new digital shifting system

We’re just back from Italy where we used Campagnolo’s brand new EPS (Electronic Power Shift) system for the first time, and we can report that it’s a silky-smooth setup with several benefits over a mechanical option. Whether you think these benefits justify the extra cash is down to you, of course.

We’ve reported on the technological background to the product already and we’ll later post video of Flavio Cracco, Campagnolo’s Electronic Control Components R&D Manager, explaining the system. Here, we’ll give you the initial ride impressions from Dave and Mat who spent several hours using EPS on the roads around Campag’s Vicenza HQ.

First, five reasons why EPS is a step forward…

1 Improved ergonomics

You’ll probably know that Campag’s existing mechanical road shifters use a lever behind the brake lever to shift to a larger chainring or sprocket and a thumb lever on the side of the control body to manage shifts in the opposite direction.

It’s the same with the new EPS controls but the thumb lever is easier to use from both the hoods and the drops. On the mechanical system, the thumb lever points out from the body of the control at right angles in order that there’s enough movement to give you the required cable pull.

With the electronic system, cable pull isn’t a consideration. You just need to tap the thumb lever so Campag have redesigned it to sit much closer to the control body.

Getting your thumb on there is just a little bit easier when you’re riding on the hoods, and considerably easier when you’re riding on the drops. You don’t have to reach your thumb around the lever and onto the top; it’s more a case of tapping it on the side.

2 Multiple shifts are quicker than with mechanical

With Campagnolo’s mechanical systems, you can shift multiple gears across the cassette by moving the levers on the right-hand control further than you would for a single shift. Different groupsets allow you to shift different numbers of sprockets at a time, but you always have to push more than once to move across the entire cassette.

With EPS, when you want to shift more than one gear you just keep your finger or thumb on the lever. You don’t need to hit it more than once, you just hold the position. Campag reckon you can shift across the entire 11-speed cassette in 1.5secs. We didn’t time it, but that sounds feasible.

Most times you change gear just one at a time, but our test ride was pretty lumpy and we used this capability on several occasions. Say you’re heading into a dip. You’re churning along downhill in a big gear, then you hit the bottom of the dip and start heading uphill. You might easily want to jump several gears. With EPS that’s still just one movement.

The opposite is true when you hit a steep descent. You might be using a large sprocket on the flat or a climb and then pick up speed rapidly as you start to head downhill. In this case you might want to get right down the cassette onto a small sprocket quickly. EPS will get you there super-fast with just one hand movement.

Shimano’s Di2 system doesn’t have this facility. If you want to change three gears, you have to tap the button three times.

3 Reduced lever movement necessary

Related to the point above, as well as just one finger/thumb movement needed to get across the cassette with EPS, that movement is considerably shorter than with Campagnolo’s mechanical system (or anyone else’s mechanical system).

Moving the levers on a mechanical system isn’t the trickiest operation in the world, clearly, but it can be a bit of a reach if you want to shift across the entire range available to you. With EPS it’s one short movement every time. 

4 There’s never any chain rub

Once the EPS system is set up correctly, no matter what sprocket you are in you never need to trim the position of the front mech to prevent chain rub because it moves automatically.

When you change gear – moving across the cassette – you’ll sometimes hear a slight whirr as the front mech moves slightly to take account of this, improving efficiency and reducing wear. The front mech doesn’t need to adjust itself every time, it makes two corrections upwards and downwards depends what gear you’re in.

Shimano’s Di2 systems have similar features for the same reasons.

5 Improved shifts

How much more precise could the EPS system’s shifts be than a mechanical system? Well, with a mechanical system, if you hit the lever to move from one chainring to the other, the front mech performs the same every time.

With EPS, the front mech acts slightly differently depending on the sprocket you’re in at the time. If there’s a high chain crossover, the front mech performs an extra stroke compared to normal to make the shift easier. So, if you’re in a large sprocket and you want to change into the big chainring, the front mech will move further than normal to help the shift. After a moment, once the shift is complete, the front mech moves to its correct position.

Why you can chill out

Every time we run anything on electronic shifting, someone comments with something along the lines of, “Ah, but how do I get home if the battery runs out of juice?” So rather than waiting for the question, we’ll answer it right now.

First, you don’t get a mobile phone battery in the EPS system (or in either of Shimano’s Di2 systems). In average use, Campag reckon you’ll get about 1,500-2,000km of riding per charge. In fact, the riders who’ve been using it for the past year say over 3,000km is possible.

I’m guessing that if you can’t remember to recharge the system within one to three months, you’re probably going to struggle to remember where you live anyway.

You can check the remaining charge on the interface – different coloured lights tell you how much is left – and a buzzer sounds when there’s only 6% remaining. Even if you wait for the buzzer, as long as you’re within 100 miles of home you’ll still be fine.

Okay, assuming you don’t check the battery level for several weeks or months and take no notice of the alarm, EPS has a Ride Back Home function. This allows you to position the rear mech manually on the sprocket you want and ride on that.

If you crash and whack the rear mech, the mechanical part of the gear can become ‘uncoupled’ from the electronic part to avoid damage. The idea is that it stops the system working temporarily so you don’t cause further damage with continued use. You can ‘recouple’ them out on the road to get the system up and running again.

Another concern we often hear is water getting in the system. Campag reckon EPS will carry on working a metre underwater for 30mins so, unless you can hold your breath for a really long time, you probably don’t need to stress.

How does EPS compare to Di2?

In use the Campagnolo system feels very different from Shimano’s Di2. Campag make great play of the work they've on the tactile side of things with their MultiDome technology. MultiDome comprises various metal layers that are designed to make the levers feel like their existing mechanical action. Why? Campag reckon their lever feel is as distinctive and important as the engine noise is to a Ducatti, so it had to be retained.

 

The lever placement is very different from Shimano’s too. With Shimano, both are finger-operated. With EPS the finger-lever moves you in one direction, the thumb-lever in the other direction. That’s certainly easier to remember to begin with. Getting used to the Shimano system takes a little longer.

Our Dave prefers the Campag shifting over Shimano’s and also over Campag’s mechanical design.

“I've never been the Ergo Lever's biggest fan for one main reason: the thumb lever is in the wrong place. It's too high, which means it's difficult to reach from the drops.

“The new EPS Ergopower controls have the thumb lever set much lower, and it's a massive improvement. It falls easily to hand from both hoods and drops, and that, coupled with the fact that you can pull the upshift lever away from the brake towards the bars, means that it's simple to make any gear change from either hand position.

“Campag and Shimano have both aped their mechanical systems with their new electronic levers, as you might expect. The irony for me is that while I prefer Shimano's mechanical levers, Campag's lever positioning works better in an electronic setup. The nature of the shift has allowed them to reposition the thumb lever to the place where it always should have been, in my opinion.”

“The multishift capability of the EPS system makes a real difference. In terms of actual function it's the thing that most separates the Campag system from the Shimano one. It's intuitive and incredibly useful.

“Shifting down the block to a higher gear is quicker than the other way round, so it takes a bit of time to learn how much time on the button equals how many changes. It means that when you crest a climb and start on the descent you can simply dump a stack of gears in one go.

“Similarly if you get caught out at the bottom of an unexpected climb it's one press to go up the block as far as you want. It doesn't sound like it would make a lot of difference but it really does.”

How much will it cost?

That's the million dollar question; hopefully the answer isn't a million dollars. We don't have a confirmed price yet, but from talking to Campag it's clear that they're pitching the Record EPS groupset against Dura Ace Di2.

The official price of the latter currently stands at about £2,500 and you can get the full groupset online for not much more than two grand. That being the case, you can expect Record EPS to be priced at around that level. Super Record will be pricier, but the differences between the actual EPS components are pretty minimal.

The power unit and interface are the same, and the Ergo levers, save for some holes in the brake lever on the Super Record, are the same too. The two mechs get more carbon in Super Record guise but most of the difference between the two groupsets is in the non-mechanical components.

That being the case, the price difference shouldn't be dissimilar to that between the mechanical groupsets, but we reckon that Campag might squeeze that gap open a bit for EPS. Let's poke a wetted finger in the air and suggest that you'll need somewhere over £2,000 for Record and we wouldn't rule out a list price of £2,500. Super Record is going to be at least £3,000, and quite probably £3,500. So that pretty test bike - a Pinarello Dogma II with Bora Ultra wheels and a fancy-dan integrated cockpit - is probably about 10 grand's worth of kit. Ouch!

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been road.cc technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. We send him off around the world to get all the news from launches and shows too. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment

23 comments

Avatar
youngoldbloke | 12 years ago
0 likes

My Veloce shifters allow me to go all the way down the block with one click on the thumb lever - in fact they won't do anything else - I must get round to fitting the new ones ......

Avatar
velotech_cycling | 12 years ago
0 likes

Just an additional note on the front gear set-up and the way it works ... the well-known problem that all Compact set-ups suffer from is that of struggling to clamber up from the 34 to the 50 under pressure, especially on the bottom 2 or 3 sprockets (I have lost count of the number of LH levers I have seen abused as riders have not "eased off" when attempting this shift).

In this case, not only, as observed in the test, does the gear perform an additional "overshift" and correction back (to prevent chain rub once the chain is on the big ring) to help the chain up, but it also changes the amount of force applied to the chain.

In the same way, when the system senses that the chain is on the lower gears at the back, the system applies a lower force to shift from big to small ring, so reducing the chance of an overshift and the chain dropping off on the inside.

When I test-rode EPS in the Colle Berici three weeks or so ago, I tried everything I know to try and force a mis-shift on a comapct system and I couldn't do it.

Given that I am a mechanic and have been since the days of friction-driven downtube 5-speed (or 6s if you were very well-heeled) shifting & have worked on every "1st Edition" from Vicenza for 30+ years, I was ready to be extrememly skeptical of EPS. I found I needed a mighty big plate for the humble pie I had to eat in the privacy of my own mind!

Avatar
WolfieSmith | 12 years ago
0 likes

Loverrrly. All of a sudden I feel that I must have electronic shifting for pootling along on sportives and the occasional TLI race next year and £2500K could be justifiable.... Interesting comment on Campagnolo demanding the use of the opposable thumb. It explains why certain low brow club mates of mine still have to use Shimano....  4

Avatar
Karbon Kev | 12 years ago
0 likes

wonderful wonderful wonderful, bring it on!!

Avatar
seabass89 | 12 years ago
0 likes

"With Shimano, both are finger-operated."

Have the thumbs been deemed obsolete, and are therefore no longer in the same classification as "fingers"?!  13

Sorry, I couldn't resist trolling that  19

Avatar
Mat Brett | 12 years ago
0 likes

"You've always been able to go all the way down the block in one go with Campag with the thumbshifter, so that's not new. Being able to go all the way up in one go is."

Not true. The Ergopower Ultra-Shift controls, as used for Super-Record, Record and Chorus 11-speed (mechanical) ranges, allow you to shift up the cassette three sprockets at a time and down the cassette five sprockets at a time.

With 11-speed Athena and 10-speed Chorus you can move up the cassette three sprockets at a time and down the cassette one sprocket at a time.

None of the mechanical groupsets allow you to move across the whole cassette in either direction with a single hand movement.

Avatar
Iwein Dekoninck replied to Mat Brett | 12 years ago
0 likes
Mat Brett wrote:

"You've always been able to go all the way down the block in one go with Campag with the thumbshifter, so that's not new. Being able to go all the way up in one go is."

Not true. The Ergopower Ultra-Shift controls, as used for Super-Record, Record and Chorus 11-speed (mechanical) ranges, allow you to shift up the cassette three sprockets at a time and down the cassette five sprockets at a time.

With 11-speed Athena and 10-speed Chorus you can move up the cassette three sprockets at a time and down the cassette one sprocket at a time.

None of the mechanical groupsets allow you to move across the whole cassette in either direction with a single hand movement.

Admittedly I haven't used any of the more recent shifters, but my Veloce and Centaur 10 speed Ergopowers, pre powershift I think, let you go 3 up, 10 down in one go.

I will rephrase to "you've been able to go all the way down in one go with some Campag shifters before"  3

Avatar
Iwein Dekoninck | 12 years ago
0 likes

You've always been able to go all the way down the block in one go with Campag with the thumbshifter, so that's not new. Being able to go all the way up in one go is.

Posh bike innit!

Avatar
FMOAB | 12 years ago
0 likes

Is it just me that thinks it's ugly, ugly ugly?

Avatar
low-fi replied to FMOAB | 12 years ago
0 likes
FMOAB wrote:

Is it just me that thinks it's ugly, ugly ugly?

I don't think you're the only one: http://bicycledesign.net/2011/11/campagnolo-design/

Avatar
FMOAB replied to low-fi | 12 years ago
0 likes

Thanks for that low-fi. I should of course have said 'Brutto! Brutto!'as Tullio Campagnolo is quoted as having said when faced with an inelegantly designed item: http://www.bicycling.com/news/featured-stories/italian-job?page=0,0

Avatar
dave atkinson | 12 years ago
0 likes

They weren't that happy that I had SPD pedals either  1

JonMack - we took pedals, shoes, helmets and kit over, the full works. Ended up riding in the EPS kit though, when in Rome and that...

Avatar
dreamlx10 replied to dave atkinson | 12 years ago
0 likes
dave_atkinson wrote:

They weren't that happy that I had SPD pedals either  1

I'm not surprised, you'll be telling us you had hairy legs as well !!

Avatar
Mat Brett | 12 years ago
0 likes

"So that pretty test bike - a Pinarello Dogma II with Bora Ultra wheels and a fancy-dan integrated cockpit - is probably about 10 grand's worth of kit. Ouch!"

...which explains why the Campag guys went a funny colour when Dave clamped his Heath Robinson filming kit to the seatstay. And then an even funnier colour when it swang around into the spokes. Very pale by Italian standards.

Avatar
JonMack | 12 years ago
0 likes

Weird question, but what's the deal with turning up for this kind of test, obviously they've provided you with jersey/bibs, and the rest of the kit is all yours, but I assume you have to take your own shoes/pedals with you too? Like I said bit of a weird one, but those that don't ask don't get.

Avatar
Mat Brett replied to JonMack | 12 years ago
0 likes
JonMack wrote:

Weird question, but what's the deal with turning up for this kind of test, obviously they've provided you with jersey/bibs, and the rest of the kit is all yours, but I assume you have to take your own shoes/pedals with you too? Like I said bit of a weird one, but those that don't ask don't get.

Yeah, that's about the size of it. The bikes are assembled minus pedals. We take our own, along with shoes, helmet... it varies. We ride the bikes for as long as we can. In this case, about 80km... Enough to get a decent idea of the function, but obviously nowhere near enough for a full-scale review. I mean, anything is going to work for 80km.

Then we give the bikes back and we're on the next flight home.

We did a piece on how these thing work a few months ago...
http://road.cc/content/blog/37441-tough-and-times-exhilarating-life-lowl...

Avatar
Fringe | 12 years ago
0 likes

whats the deal with SRAM then?. do you think they are waiting in the wings to see how this whole electronic shifting thing takes off, esp. given shimanos more pedestrian friendly priced Ultegra Di2. then when the market is properly there so to speak will they launch their own electronic set up..

 39

Avatar
dave atkinson replied to Fringe | 12 years ago
0 likes
Fringe wrote:

whats the deal with SRAM then?. do you think they are waiting in the wings to see how this whole electronic shifting thing takes off, esp. given shimanos more pedestrian friendly priced Ultegra Di2. then when the market is properly there so to speak will they launch their own electronic set up

You can't help but think they're going to need one, now that both the other big players have gone to market.

SRAM don't really have campag's luxury of claiming that they've been working on it for years and years so they're not actually late to the party at all. So for me they'd have to offer something that these two systems don't. Not sure what that would be...

Avatar
Mat Brett replied to Fringe | 12 years ago
0 likes
Fringe wrote:

whats the deal with SRAM then?. do you think they are waiting in the wings to see how this whole electronic shifting thing takes off, esp. given shimanos more pedestrian friendly priced Ultegra Di2. then when the market is properly there so to speak will they launch their own electronic set up..

 39

We genuinely don't know, Fringe. That would be a really unusual strategy. Surely, you want to be in the market as quickly as possible to set your stall out. We've asked them, obviously; they've told us nothing to indicate there's anything arriving any time soon.

Avatar
Baldy1alex | 12 years ago
0 likes

Will the EPS come in any less than 11 speed for oldies like little old me with a 9 goin on 10 sp. setup me wonders here's hopein !?  20

Avatar
Mat Brett replied to Baldy1alex | 12 years ago
0 likes
Baldy1alex wrote:

Will the EPS come in any less than 11 speed for oldies like little old me with a 9 goin on 10 sp. setup me wonders here's hopein !?  20

I very much doubt it, Baldy1alex. Campag reckon they were close to launching a 10-speed version a while back (and ones with fewer gears in the years before that) but didn't want to do it when their top mechanical groupsets were moving up to 11-speed.

If the EPS technology eventually trickles right down the groupset hierarchy, I'd imagine those groupsets that aren't already 11-speed will become 11-speed, rather than Campag evolving the technology into a 10-speed format.

In other words, don't hold your breath.

Avatar
dave atkinson | 12 years ago
0 likes

Veloce's probably a while off yet  1

Avatar
Fringe | 12 years ago
0 likes

whens the Veloce version out then for us mere mortals?!

Latest Comments