Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Updated: Bike brands unhappy with new UCI equipment approval scheme

Governing body has acted disrespectfully, says one major manufacturer

The bike industry is reacting to the new approval procedure for race bike frames and forks set up by the International Cycling Union (UCI), cycle sport's world governing body, and it’s fair to say that there’s a mix of nervousness and incredulity.

One source has claimed, “The UCI is out of their collective mind. I could never imagine that a governing body could be so disrespectful.”

The approval procedure, which comes into force on 1 January, will result in new frames and forks getting a label to say that they comply with the UCI's equipment regulations... or not. A list of approved products for use in road, track and cyclocross events will be published on the UCI’s website.

The UCI announced at the Eurobike tradeshow back in September that they would be forming a technical commission to approve race equipment. But a press release earlier this month stating that the new approval process for frames and forks would come into force on 1 January has taken many by surprise.

“The UCI sent out this press release without ever discussing the new system with the bike industry or the World Federation of the Sporting Goods Industry (WFSGI), the group the UCI asked to help them work with the bike industry,” said the head of one major cycling manufacturer, who does not wish to be named.

“The UCI are proposing that we, meaning all companies supplying bikes to teams competing in UCI-sanctioned events, have four weeks (two of them holiday weeks) to get approval and then buy stickers to apply to all the bikes.”

Other bike industry sources are still unsure of the effects the new approval procedure will have.

"We’re still working through what this new approval process means," said Chris Garrison of Trek. "The product guys have been going through it, but it’s not entirely clear what is going to be expected of us. Since we do develop our own methods for working with carbon and advancing what can be done with it, it probably will have some impact on us. We just don’t know what that is at the moment."

Another industry source who doesn't wish to be named said, "I have a feeling of dread! We are pretty small and I'm really not sure how I will cope with the extra workload I can see this causing. Just keeping up with designing frames is hard enough."

The UCI haven’t done much to clarify the situation, although they do say that they will publish the new approval protocol “shortly”.

It is only “new models of frames and forks still at the conception stages on 1st January 2011 [that] will be subjected to the new approval procedure,” according to a new statement from the UCI.

Existing products don’t need to go through the approval procedure although they are still bound by UCI regulations. So, older products don’t need to get on to the list in order to be race legal, but they must meet the regulations anyway.

The UCI statement adds, “Models produced in 2009 and 2010 will be able to obtain backdated approval.”

Why would manufacturers want to get backdated approval for a product? To clarify that it’s race legal in order to set the minds of teams and potential buyers at rest. It is worth pointing out that a bike only needs to be UCI legal if it is being raced in a UCI accredited event. However, one of the other stipulations of the UCI Technical Regulations is that all bikes are models that can be bought, so there are unlikely to be UCI-compliant specials while the rest of us get to benefit from the latest technology. That's the way it looks on paper at least.

The new approval procedure will be implemented in collaboration with the Swiss Ecole Polytechnique Fédérale de Lausanne (EPFL), and it will eventually be set up for wheels, handlebars, seating and clothing, although the UCI have not announced a timescale on that. They tell us that they're working on these further approval systems but it's too soon to give dates on their implementation.

What are the benefits of the new frame and forks approval system? The UCI list six advantages. Here they are in full:

  • The manufacturers will be assured of the conformity of their products before they go into production phase; they will therefore be able to take maximum advantage of the most recent technologies, notably concerning composite materials, without running the risk of investing resources in equipment that may then be declared non-conform with the regulations
  • The collaboration between the UCI and the manufacturers, in particular concerning the exchange of information, will be easier, within a context of strict confidentiality
  • The controversies over the conformity or otherwise of a particular piece of equipment as well as the banning of equipment at the start of races will once and for all be in the past
  • The work of Commissaires who inspect equipment at the start of event will be made much easier
  • The riders – from the professional athlete to amateur sportsmen and sportswomen – will be assured that they have acquired a model that conforms to the UCI regulation in force at the time of purchase
  • In addition, the label will provide added value to frames and forks which have obtained it, benefiting the concerned manufacturers.

Equipment rules are set out in chapter 3 of the UCI’s regulations and they’ve been enforced more rigidly over the past couple of years. The approval system is seen as a means of uniformly applying these regulations, rather than leaving it up to individual race commissaires.

The equipment regulation that has been in the news most often recently is on frame structure (1.3.024, if you want to check it out). Essentially, it says that the profile of any frame tube, like other equipment including handlebars, must have a length:width ratio no greater than 3:1. It can't be more than three times as deep as it is wide.

Time trial bikes and track bikes are the types of machine that have over the past few years had the most difficulty complying with UCI regs – the UCI seems to have had particular difficulty deciding if particular TT bikes are legal or not. Indeed, their own TT world championship was won in 2009 on a bike that was subsequently deemed not to comply with the Technical Regulations.

While the UCI can list six benefits for their new approval process, there is one big drawback for those of us who ride bikes rather than race them – namely that the new regulations will kill technical innovation that will benefit many in the interests of sporting purity which will benefit… the UCI, presumably, as no doubt manufacturers will have to pay something towards the cost of getting their equipment approved.

One factor that may or may not prove significant is the identity of the man headling up the approval process, Prof Jan Anders Manson, vice president of the EPFL. Professor Manson is a composites expert who fulfils a similar role for the world swimming body heading up their technical approvals process. FINA last year banned non-textile swimsuits on the grounds that they were "performance enhancing" so it is probably safe to say he isn't a big fan of technical innovations when it comes to sporting equipment.

Leaving notions of sporting purity aside, the latest UCI move on technical regulations could be seen as a move by the organisation to insert itself into the retail process and to claim a slice of an industry that has seen massive growth around the world – in much the same way that the organisation has made so far unsuccessful attempts to control major races. Interestingly, the UCI has also signalled its intention to get involved with approving cycle clothing too.

Go here for a complete list of the UCI’s regulations.

 

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been road.cc technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment

9 comments

Avatar
pups110 | 13 years ago
0 likes

The UCI really needs to have a reality check. Most cyclists don't race and most cyclists really don't care about the UCI. Personally, i think they should go take the long ride off the short pier.

Avatar
antonio | 13 years ago
0 likes

There is a short sweet answer to yet another of UCI's (Mcquaid's) tilt to madness, 'get stuffed'.

Avatar
TheRotor | 13 years ago
0 likes

Yet more petty bureaucracy from Switzerland.

Avatar
Cervelo12 | 13 years ago
0 likes

most racing/road bikes are sold to people who don't race, so a completely pointless exercise. The uci should concentrate on organising safe races and keeping the sport clean, not messing around with useless stickers.

Avatar
Jon Burrage | 13 years ago
0 likes

To be honest I dont care about having a uci legal bike so I'd probably be in the market for something that looks 'different'. In my case Id be after a tri bike and while some are made with keeping the ITU (Internation Triathlon Union) happy, other brands such as ceepo go the other way and provide mad designs for riders who arent going to ride ITU sanctioned events. Maybe it will create a market where brands go in 2 directions.

Avatar
Tony Farrelly | 13 years ago
0 likes

The other thing to bear in mind is that the UCI will want paying for their stickers a cost that would probably be passed on to the end consumer.

Avatar
TwiggyHo | 13 years ago
0 likes

I agree with cervelo12. The likes of trek and spesh to name but two have such an integral position in major races accross all disciplines that I doubt the uci would be able to force this through. If the manufacturers and subsequently teams and riders (like the brothers schleck, cancellara etc etc) say "no" then are the uci going to stop their star attractions from racing?

Avatar
Cervelo12 | 13 years ago
0 likes

I can't see the point, if you have huge brands selling bikes and forks without EN safety standard certification, then why would they bother about UCI approval?

Avatar
Cooks | 13 years ago
0 likes

But if tube widths are limited, where am I going to fit my motor?

Latest Comments