Home

Hi can anyone help?I've got problems shifting into the big ring on the gear,what is best way to fix

3 comments

Avatar
KiwiMike [1291 posts] 3 years ago
0 likes

Read the manual, set the shifter up correctly. And/or Listen to one of the @bikeshopshow podcasts covering front mech setup. Ep45: http://bikeshopshow.libsyn.com/bike-shop-show-00045

You can't go wrong.

Avatar
Bedfordshire Clanger [345 posts] 3 years ago
0 likes

What kind of problem?

1.Won't go far enough to get on the big ring?
2.Goes too far and shifts the chain off of the outside of the big ring?

1. Tighten the cable a quarter turn at a time until it works.

2. Adjust the outer limit screw so that the mech can't move far enough to shift the chain off of the ring.

Or is it something else?

Avatar
Shanefutcher [98 posts] 3 years ago
0 likes

Its problem number 1 so I'll try fixing tonight.thanks for advice guys