FS Cervelo S3 58cm w/ Ultegra, Rotor, 50mm clinchers
Unfortunately, I have too many bikes (I know, there shouldn't be such a thing) and the time has come to admit I'm not doing this one justice - my gorgeous Cervelo S3 has to go. Pics are on flickr here - http://tinyurl.com/ktqyz4u.
Spec as follows:
Cervelo S3 58cm - 2011 frameset with 3T Funda Team fork, bought brand new 1 year ago
Ultegra 6700 groupset
Rotor crankset with KCNC cobweb rings
Fuerte Bici 50mm carbon clinchers
S-Works carbon bar, Colbert carbon stem
(pedals not included)
EDIT: bit of additional info -
Crank length - 172.5mm
Chainring sizes - 50-34
Current and max centre of bottom bracket to top of saddle - current: 80.2cm, max 84cm
Current stem length - 100mm
Full geometry available here: http://www.cervelo.com/media/docs/S3-f65ad181-3801-47f8-b427-226260d8ec2...
The frame and fork replaced my previous Cervelo frame one year ago and have only around 1200km on them. Same for the chainset. The wheels are slightly older (around 2 years) but only used for dry miles in good conditions, and the same with the rest of the groupset - this was my best bike for special occasions! It's in fantastic condition and is a cracking ride - light, really zippy and responsive, but still comfortable on our less than perfect roads and with an aero advantage to boot.
Looking for £2500 ono (excluding postage). Bike is in London - can be viewed in SE19 or in Victoria. Buyer to collect or can arrange courier at additional cost.