Garmin Courses Help

by notfastenough   February 20, 2013  

Hey folks,
I've created a course for my Garmin 200. I tend to head out on a particular road, then ride a loop which comes back to that same road, which I then ride in the opposite direction until I reach home. However, for Garmin, this seems to be a combination of 'loop' and 'out-and-back' course types.

I've created the course as a loop, but when I hit the road to come home, the distance stops increasing, so my course isn't complete. Can anyone tell me what I'm doing wrong?

2 user comments

Oldest firstNewest firstBest rated

Best bet I find when riding the same road back is just plan it manually from start to finish rather than asking Garmin to out and back it for you or anything. Never had any problems doing it this way.

posted by mattyb95 [28 posts]
20th February 2013 - 21:15

like this
Like (2)

Righto, thanks.

If I could have, say, 6 bikes, would it stop me drooling over others that I don't have?

posted by notfastenough [2951 posts]
25th February 2013 - 23:03

like this
Like (2)