Changing Campag Veloce Cassette

by jockster   January 19, 2013  

Hi

Could anyone give me a list of tools I will need to do this. I have a very limited (i.e. a multi-tool) tool kit at the moment and would like to put on a new cassette. Cheers, Simon

7 user comments

Oldest firstNewest firstBest rated

you'll need a cassette removal tool but that is about it.

daviej's picture

posted by daviej [7 posts]
19th January 2013 - 19:15

like this
Like (1)

daviej wrote:
you'll need a cassette removal tool but that is about it.

....... and a chain whip. The chain whip stops the cassette spinning on the free wheel while you undo the lock ring with the splined cassette tool.

check out Park Tools website for loads of maintenance advice and detailed instructions

Follow me on-
Twitter - @StuKerton
Strava - http://www.strava.com/athletes/931095

stuke's picture

posted by stuke [306 posts]
19th January 2013 - 19:33

like this
Like (2)

oh yeah and a chain whip

daviej's picture

posted by daviej [7 posts]
19th January 2013 - 19:44

like this
Like (1)

Make sure you get a Campag pattern cassette tool not a Shimano one....

posted by jimmo62 [59 posts]
19th January 2013 - 19:54

like this
Like (3)

Hi - thanks for all the help - will I need a new chain?

Cheers, Simon

posted by jockster [10 posts]
19th January 2013 - 20:02

like this
Like (2)

It is the park tool BBT-5 12 spline lockring tool or equivilent. Some grease as well.

cidermart's picture

posted by cidermart [460 posts]
19th January 2013 - 20:38

like this
Like (2)

I would do on a new cassette you could use the old chain to hold the cassette and save on a chain whip but if you are borrowing then the whip is better.

cidermart's picture

posted by cidermart [460 posts]
19th January 2013 - 20:41

like this
Like (2)