Previous Forum topic
Forme Road Bikes? (Thorpe / Flash)
Next Forum topic
Moor 2 Sea Sportive 2013 - Pre Christmas Special Offer
Carbon bike but the dropout on drive side around the aluminium needs repair.
Question is how easy is this to repair is it worth it?
7 user comments
Just to be clear - it is the carbon frame that's the problem rather than the metal rear mech hanger. Is that right?
posted by Bedfordshire Clanger [345 posts] 20th December 2012 - 11:21
If its just the mech hanger, get a new one.
If its the carbon where the mech hanger attaches.....erm, that could be a big problem
posted by Gkam84 [9290 posts] 20th December 2012 - 12:43
Nothing wrong with the carbon its just the alloy drop-out on drive side needs repairing.
So sounds all good to me, unless someone else say's other wise
posted by teamrocket13 [80 posts] 20th December 2012 - 16:06
Yep, buy a new one and replace. Easily done, they are meant to bend or break before the frame does.
posted by Bedfordshire Clanger [345 posts] 20th December 2012 - 16:28
perfect thank you
posted by teamrocket13 [80 posts] 20th December 2012 - 16:42
Seems to be some confusion here between the terms 'drop out' and 'mech hanger'
The drop out is the bit the axle slots into and is an integral part of the frame. Your description suggests an alloy dropout bonded into a carbon frame? Repairing / replacing this is a specialist job and may not be feasible or cost - effective.
The mech hanger is an alloy part bolted on to the dropout and in to which the mech mounting bolt screws. This is designed as a sacrificial component which in an incident involving the rear mech will break thus saving the frame. These are (fairly) cheap and easy to fit yourself.
posted by keef66 [36 posts] 20th December 2012 - 16:58
Keef's right, sorry for any confusion caused.
posted by Bedfordshire Clanger [345 posts] 20th December 2012 - 19:53
Events coming up
Want to advertise? Click here
road.cc is made by Farrelly Atkinson Ltd, Unit 7b, Green Park Station, Bath BA11JB Tel 01225 588855 Company #6644103. All material © Farrelly Atkinson 2008–present unless otherwise stated. Terms and conditions of use.