Home

currently using an old Centaur rear mech and Veloce shifters and a 105 front mech, c2007 i think, Currently it is all 9spd.

In the near future i am going to need to change the cassette and chain and cables. and the shifters are getting a bit worn....

Can anyone say whether the new campagnolo shifters will work with the last generation mechs.

Do i need a new 10spd mech to work on a 10spd cassette? are the front shifters still microindexed or am i going to need to get a new front mech? do the current 10spd shifters pull the same amount of cable as the previous generation 10spd shifters.

etc. etc, etc.

3 comments

Avatar
gralegav [6 posts] 3 years ago
0 likes

Hi, I'm currently using a 9 speed Daytona mech with modern 10 speed Centaur Ultradrive) and 10 speed chain and cassette, all works fine!

Avatar
mrmo [2073 posts] 3 years ago
0 likes

thanks, just to confirm, your using the new power-shift levers? rather than the previous levers.

this shape

//www.campagnolo.com/repository/prodotti/zoom/CE-ergoSx-nero_500x581.jpg)

not this shape?

//www.totalcycling.com/images/large/18943_062919.jpg)

Avatar
roughwaters99 [8 posts] 3 years ago
0 likes

I have a 2008 Mirage rear mech, 2010 Veloce cassette, 2011 Centaur front mech and 2012 Veloce shifters. All work perfectly together.