mix and match Campagnolo

by mrmo   November 24, 2012  

currently using an old Centaur rear mech and Veloce shifters and a 105 front mech, c2007 i think, Currently it is all 9spd.

In the near future i am going to need to change the cassette and chain and cables. and the shifters are getting a bit worn....

Can anyone say whether the new campagnolo shifters will work with the last generation mechs.

Do i need a new 10spd mech to work on a 10spd cassette? are the front shifters still microindexed or am i going to need to get a new front mech? do the current 10spd shifters pull the same amount of cable as the previous generation 10spd shifters.

etc. etc, etc.

3 user comments

Oldest firstNewest firstBest rated

Hi, I'm currently using a 9 speed Daytona mech with modern 10 speed Centaur Ultradrive) and 10 speed chain and cassette, all works fine!

posted by gralegav [7 posts]
24th November 2012 - 21:54

1 Like

thanks, just to confirm, your using the new power-shift levers? rather than the previous levers.

this shape

not this shape?

mrmo's picture

posted by mrmo [1362 posts]
24th November 2012 - 22:25

1 Like

I have a 2008 Mirage rear mech, 2010 Veloce cassette, 2011 Centaur front mech and 2012 Veloce shifters. All work perfectly together.

posted by roughwaters99 [9 posts]
24th November 2012 - 22:55

1 Like