Previous Forum topic
Next Forum topic
mix and match Campagnolo
currently using an old Centaur rear mech and Veloce shifters and a 105 front mech, c2007 i think, Currently it is all 9spd.
In the near future i am going to need to change the cassette and chain and cables. and the shifters are getting a bit worn....
Can anyone say whether the new campagnolo shifters will work with the last generation mechs.
Do i need a new 10spd mech to work on a 10spd cassette? are the front shifters still microindexed or am i going to need to get a new front mech? do the current 10spd shifters pull the same amount of cable as the previous generation 10spd shifters.
etc. etc, etc.
Hi, I'm currently using a 9 speed Daytona mech with modern 10 speed Centaur Ultradrive) and 10 speed chain and cassette, all works fine!
thanks, just to confirm, your using the new power-shift levers? rather than the previous levers.
this shape
not this shape?
posted by mrmo [514 posts]
24th November 2012 - 22:25
I have a 2008 Mirage rear mech, 2010 Veloce cassette, 2011 Centaur front mech and 2012 Veloce shifters. All work perfectly together.
posted by roughwaters99 [8 posts]
24th November 2012 - 22:55
posted by gralegav [7 posts]
24th November 2012 - 21:54