canti's vs v's

by giff77   February 14, 2012  

Have just picked up an old steel frame which has canti brakes. Am pondering whether it is worth the expense (getting levers cables etc) of switching over to v brakes rather than overhauling the canti's. Or any tips for overhauling said canti's. More familiar with callipers which is why I ask Smile

6 user comments

Oldest firstNewest firstBest rated

If you're running it on the road then Mini-Vs are another option; they have the same cable pull as cantis. make sure you fit an inline adjuster too though...

Dave Atkinson's picture

posted by Dave Atkinson [7506 posts]
14th February 2012 - 7:39

0 Likes

I did just that. Always used cantis on CX bikes and as the entire world recommended V's I swapped for some mini's. They seemed fine at first but really loose the power when they bare worn and you have had to shorten the cable. You can adjust cantis a lot more before you ditch the blocks. Also unhooking the V noodle is akward if the blocks are close to the rim.
See Sheldon Brown for advice on setting cantis. Also CTC forum

posted by mattsccm [280 posts]
14th February 2012 - 8:47

1 Like

I've used both and switched to Cantis as I couldnt fit mudguards with mini-v's as they are bang in the way.

I found mini-v's were more powerful but didnt have the 'feel' of canti's.

TheHatter's picture

posted by TheHatter [811 posts]
14th February 2012 - 13:01

1 Like

Thanks guys for your help. Thinking I'll keep the canti's as I'll be able to fit guards and like the idea that the blocks can last longer. It's tough being aa cheapskate Big Grin

giff77's picture

posted by giff77 [1068 posts]
14th February 2012 - 22:46

1 Like

if you're keeping the cantis, getting some good quality cartridge pads will make all the difference

Dave Atkinson's picture

posted by Dave Atkinson [7506 posts]
14th February 2012 - 22:52

1 Like

Brilliant -thanks Dave

giff77's picture

posted by giff77 [1068 posts]
14th February 2012 - 23:12

1 Like