FS: Cube Attempt frame, fork, headset and seatclamp - NEW PICTURES 30-10-11

by mathewshotbolt   October 21, 2011  

This was originally an exercise in sizing which i have since discovered doesn't work for me! I have ridden the bike twice, a total of just over 70 miles.

A 2011, 53cm Cube attamept frame, fork and headset.

All is in immaculate condition and the bottom bracket shell has been faced ready for an external bottom bracket. The derailleur hanger has been aligned and the headset generously greased.

The bike rode superbly but was just not quite the right size for me.

I am looking for £200 ono and other parts are available from the split.

Please contact for any further information.

Mat

8 user comments

Oldest firstNewest firstBest rated

Any chance of a pic please? may be interested in this, is postage an option if i pay extra for that, as i'm in north east scotland Thinking

Gkam84's picture

posted by Gkam84 [8825 posts]
21st October 2011 - 20:26

like this
Like (1)

I'll endeavour to get a couple of pictures asap for you.

If i send it'll be via a courier so signed for if thats alright?

posted by mathewshotbolt [100 posts]
21st October 2011 - 20:29

like this
Like (1)

Yeah courier is fine, if you can't get pictures up on here, just click on my name and send me a message, i'll give you my email address Nerd

Gkam84's picture

posted by Gkam84 [8825 posts]
21st October 2011 - 21:02

like this
Like (1)

This is it in its bike form.

a full strip and thorough clean will happen tomorrow.

The frame will be sent in a frame box with all necessary axle spacers too.

posted by mathewshotbolt [100 posts]
21st October 2011 - 21:05

like this
Like (1)

i've tried to post a picture up but its gone to be checked out with road.cc to see if its spam or not!!

posted by mathewshotbolt [100 posts]
21st October 2011 - 21:13

like this
Like (1)

for the guys who are interested, i now have fully stripped down pictures of the frame and fork.

Completely checked over and clean and can confirm that the chassis has no damage barring a small amount of paint removed from underneath the front brake caliper (where the brake mounts to the fork)

Please contact me if you would like a picture or two.

posted by mathewshotbolt [100 posts]
25th October 2011 - 19:38

like this
Like (0)

Thanks for the picture and message Mat, unfortunately, i was looking to buy this to build up, but because of unforeseen circumstances (check the forum) I'm now skint Crying

Gkam84's picture

posted by Gkam84 [8825 posts]
26th October 2011 - 13:45

like this
Like (1)

Right folks, i have now fully stripped, cleaned and polished the frame ready for sale.

I have also taken pictures and will be boxing the frame ready to go out the door when required.

The second picture shows the minor paint damage where the front brake caliper was mounted. once another brake is attached, this will be covered up.

The frame is otherwise mint.

Mat

posted by mathewshotbolt [100 posts]
30th October 2011 - 23:10

like this
Like (0)